From: Alistair Francis <alistair@xxxxxxxxxxxxx> Add support to the reMarkable2 (rM2) for the Wacom I2C device. This is based on the reMarkable Linux fork and with this series I am able to probe the Wacom digitiser. Alistair Francis (9): dt-bindings: Add Wacom to vendor bindings dt-bindings: touchscreen: Initial commit of wacom,generic Input: wacom_i2c - Add device tree support to wacom_i2c Input: wacom_i2c - Add touchscren properties Input: wacom_i2c - Add support for distance and tilt x/y Input: wacom_i2c - Clean up the query device fields Input: wacom_i2c - Add support for vdd regulator ARM: imx_v6_v7_defconfig: Enable Wacom I2C ARM: dts: imx7d: remarkable2: add wacom digitizer device .../input/touchscreen/wacom,generic.yaml | 48 +++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/imx7d-remarkable2.dts | 52 +++++++ arch/arm/configs/imx_v6_v7_defconfig | 1 + drivers/input/touchscreen/wacom_i2c.c | 129 +++++++++++++++--- 5 files changed, 210 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/wacom,generic.yaml -- 2.30.1
