Re: [PATCH v7 0/5] Add initial support for ATC260x PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lee,

I have just noticed your mfd-next tag for 5.12 doesn't include the
support for the ATC260x PMICs.

I assumed the patchset is ready for merging.. Did I miss something?

Thanks,
Cristi

On Tue, Jan 26, 2021 at 11:55:56AM +0200, Cristian Ciocaltea wrote:
> The ATC260x family of PMICs integrates Audio Codec, Power management,
> Clock generation and GPIO controller blocks. There are currently 3
> variants: ATC2603A, ATC2603C and ATC2609A.
> 
> This is re-spin of the v1 patch series submitted some time ago by
> Mani, who provided the MFD and regulator drivers for ATC2609A:
> https://lore.kernel.org/lkml/20190617155011.15376-1-manivannan.sadhasivam@xxxxxxxxxx/
> 
> Since v2, I added support for ATC2603C, together with some new
> functionalities for both chips: power controller and onkey input.
> The ATC2603A chip type remains unsupported for the moment.
> 
> This has been tested on RoseapplePi, a SBC based on the Actions Semi S500
> SoC, which integrates the ATC2603C variant of the PMIC.
> 
> Note that enabling the ATC260x PMICs on compatible Actions Semi Owl SoC
> based boards depends on:
> 
> * the Actions Semi SIRQ driver (for PMIC DTS setup), merged in v5.10:
>   https://lore.kernel.org/lkml/cover.1600114378.git.cristian.ciocaltea@xxxxxxxxx/
> 
> * the atomic transfers in Owl I2C driver (for power controller), merged in v5.11:
>   https://lore.kernel.org/lkml/cover.1602190168.git.cristian.ciocaltea@xxxxxxxxx/
> 
> Additionally, please note that I have taken the authorship for the MFD
> and regulator drivers patches, considering the original code has been
> modified to a large extent.
> 
> Thanks,
> Cristi
> 
> Changes in v7:
> - Dropped the patches already queued for merging:
>   * regulator: Add regulator driver for ATC260x PMICs
>   * power: reset: Add poweroff driver for ATC260x PMICs
> - Rebased patchset on v5.11-rc5
> 
> Changes in v6 - MFD driver updates as indicated by Lee:
> - Defined a magic number for max chip revision
> - Adjusted code formatting around i2c_driver struct initialization
> - Dropped the device initialization callback in struct atc260x and instead 
>   provided a generic function making use of a new member structure to hold
>   the hardware specific register information
> 
> Changes in v5:
> - Removed an unnecessary '#include' line in the power-off driver,
>   as noticed by Sebastian
> - Rebased patchset on v5.11-rc3
> 
> Changes in v4:
> - Updated MFD driver according to Lee's review
> - Handled ATC2603C's LDO12 fixed regulator per Mark's suggestion
> - Rebased patchset on v5.11-rc1
> 
> Changes in v3:
> - Integrated feedback from Mani, Rob, Mark, Sebastian, Dmitry
> - Fixed issues reported by Lee's kernel test robot
> - Added new patch for 'reset-time-sec' DT binding property
> - Rebased patchset on v5.10-rc6
> 
> Changes in v2:
> - Reworked MFD core & I2C driver
>   * Integrated Lee's feedback
>   * Added support for using the regmap within atomic contexts
>   * Added support for ATC2603C chip variant
>   * Reorganized KConfig entries
> - Improved regulator driver
>   * Added support for ATC2603C variant
>   * Used helper macros for more compact specification of regulator_desc items
>   * Added more regulator capabilities
> - Added power controller driver
>   * Provides system poweroff/reboot functionalities
>   * Depends on atomic transfers in the Owl I2C driver
> - Added onkey driver: exposes the power button as an input device
> - Added yaml binding doc
> - Rebased patchset on kernel v5.9-rc1
> 
> Cristian Ciocaltea (4):
>   dt-bindings: input: Add reset-time-sec common property
>   dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding
>   mfd: Add MFD driver for ATC260x PMICs
>   input: atc260x: Add onkey driver for ATC260x PMICs
> 
> Manivannan Sadhasivam (1):
>   MAINTAINERS: Add entry for ATC260x PMIC
> 
>  .../devicetree/bindings/input/input.yaml      |   7 +
>  .../bindings/mfd/actions,atc260x.yaml         | 183 +++++++++++
>  MAINTAINERS                                   |  12 +
>  drivers/input/misc/Kconfig                    |  11 +
>  drivers/input/misc/Makefile                   |   2 +-
>  drivers/input/misc/atc260x-onkey.c            | 305 +++++++++++++++++
>  drivers/mfd/Kconfig                           |  18 +
>  drivers/mfd/Makefile                          |   3 +
>  drivers/mfd/atc260x-core.c                    | 310 ++++++++++++++++++
>  drivers/mfd/atc260x-i2c.c                     |  64 ++++
>  include/linux/mfd/atc260x/atc2603c.h          | 281 ++++++++++++++++
>  include/linux/mfd/atc260x/atc2609a.h          | 308 +++++++++++++++++
>  include/linux/mfd/atc260x/core.h              |  58 ++++
>  13 files changed, 1561 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
>  create mode 100644 drivers/input/misc/atc260x-onkey.c
>  create mode 100644 drivers/mfd/atc260x-core.c
>  create mode 100644 drivers/mfd/atc260x-i2c.c
>  create mode 100644 include/linux/mfd/atc260x/atc2603c.h
>  create mode 100644 include/linux/mfd/atc260x/atc2609a.h
>  create mode 100644 include/linux/mfd/atc260x/core.h
> 
> -- 
> 2.30.0
> 



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux