The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids
as the Acer One S1003 keyboard-dock. Yet they are not entirely the same:
1. The S1003 keyboard-dock has the same report descriptors as the
S1002 keyboard-dock (which has different USB-ids)
2. The Acer Aspire Switch 10E's keyboard-dock has different
report descriptors from the S1002/S1003 keyboard docks and it
sends 0x00880078 / 0x00880079 usage events when the touchpad is
toggled on/off (which is handled internally).
This means that all Acer kbd-docks handled by the hid-ite.c drivers
report their touchpad being toggled on/off through these custom
usage-codes with the exception of the S1003 dock, which likely is
a bug of that dock.
Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003
usb-id so that the touchpad toggling will get reported to userspace on
the Aspire Switch 10E.
Since the Aspire Switch 10E's kbd-dock has different report-descriptors,
this also requires adding support for fixing those to ite_report_fixup().
Setting the quirk will also cause ite_report_fixup() to hit the
S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock
never generates any input-reports for the fixed up part of the
descriptors this does not matter; and if there are versions out there
which do actually send input-reports for the touchpad-toggle then the
fixup should actually help to make things work.
This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/hid/hid-ite.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-ite.c b/drivers/hid/hid-ite.c
index 22bfbebceaf4..14fc068affad 100644
--- a/drivers/hid/hid-ite.c
+++ b/drivers/hid/hid-ite.c
@@ -23,11 +23,16 @@ static __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int
hid_info(hdev, "Fixing up Acer Sw5-012 ITE keyboard report descriptor\n");
rdesc[163] = HID_MAIN_ITEM_RELATIVE;
}
- /* For Acer One S1002 keyboard-dock */
+ /* For Acer One S1002/S1003 keyboard-dock */
if (*rsize == 188 && rdesc[185] == 0x81 && rdesc[186] == 0x02) {
- hid_info(hdev, "Fixing up Acer S1002 ITE keyboard report descriptor\n");
+ hid_info(hdev, "Fixing up Acer S1002/S1003 ITE keyboard report descriptor\n");
rdesc[186] = HID_MAIN_ITEM_RELATIVE;
}
+ /* For Acer Aspire Switch 10E (SW3-016) keyboard-dock */
+ if (*rsize == 210 && rdesc[184] == 0x81 && rdesc[185] == 0x02) {
+ hid_info(hdev, "Fixing up Acer Aspire Switch 10E (SW3-016) ITE keyboard report descriptor\n");
+ rdesc[185] = HID_MAIN_ITEM_RELATIVE;
+ }
}
return rdesc;
@@ -114,7 +119,8 @@ static const struct hid_device_id ite_devices[] = {
/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_SYNAPTICS,
- USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003) },
+ USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003),
+ .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
{ }
};
MODULE_DEVICE_TABLE(hid, ite_devices);
--
2.30.0
