On Fri, Jan 22, 2021 at 7:32 AM Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
>
> Hi,
>
> thanks for the patch.
>
> On 21-01-20 22:56, Alistair Francis wrote:
> > Enable the wacom_i2c touchscreen for the reMarkable2.
> >
> > Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/imx7d-remarkable2.dts | 41 +++++++++++++++++++++++++
> > arch/arm/configs/imx_v6_v7_defconfig | 1 +
>
> Those two changes should be splitted and the dts patch should be named:
> "ARM: dts: imx7d: remarkable2: add wacom digitizer device".
>
> > 2 files changed, 42 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > index fba55a0e028a..8052d884a5e5 100644
> > --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > @@ -150,6 +150,30 @@ &dma_apbh {
> > status = "disabled";
> > };
> >
> > +&i2c1 {
> > + clock-frequency = <400000>;
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&pinctrl_i2c1>;
> > + pinctrl-1 = <&pinctrl_i2c1>;
>
> No need to specify the sleep state if both are using the same pinctrl
> config.
>
> > + status = "okay";
> > +
> > + digitizer: wacom-i2c@9 {
>
> this should be:
> wacom_digitizer: digitizer@9 {
>
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&pinctrl_wacom>;
> > + pinctrl-1 = <&pinctrl_wacom>;
>
> Same here, sleep and default refer to the same state.
>
> > + compatible = "wacom,wacom-i2c";
> > + reg = <0x09>;
>
> compatible and reg are always the first to properties.
>
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <1 2>;
>
> Please use defines.
I have addressed all your comments.
>
> > + flip-tilt-x;
> > + flip-tilt-y;
> > + flip-pos-x;
> > + flip-pos-y;
> > + flip-distance;
> > + vdd-supply = <®_digitizer>;
>
> Where is this regulator added?
It's already in the DT, it will be added with the initial commit
(which is currently on the list).
Alistair
>
> > + };
> > +};
> > +
> > &sdma {
> > status = "okay";
> > };
> > @@ -221,6 +245,16 @@ &wdog1 {
> > };
> >
> > &iomuxc_lpsr {
> > + pinctrl_wacom: wacomgrp {
> > + fsl,pins = <
> > + /*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x00000074 /* WACOM RESET */
> > + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x00000034 /* WACOM INT */
> > + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x00000074 /* PDCTB */
> > + /*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x00000014 /* FWE */
> > + /*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x00000014 /* WACOM PWR ENABLE */
> > + >;
> > + };
>
> Pls, sort this alphabetical.
>
> > +
> > pinctrl_digitizer_reg: digitizerreggrp {
> > fsl,pins = <
> > /* DIGITIZER_PWR_EN */
> > @@ -236,6 +270,13 @@ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x59
> > >;
> > };
> >
> > + pinctrl_i2c1: i2c1grp {
> > + fsl,pins = <
> > + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
> > + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
> > + >;
> > + };
> > +
> > pinctrl_uart1: uart1grp {
> > fsl,pins = <
> > MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
> > diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> > index fa9229616106..2fc8dc6a8b0a 100644
> > --- a/arch/arm/configs/imx_v6_v7_defconfig
> > +++ b/arch/arm/configs/imx_v6_v7_defconfig
> > @@ -167,6 +167,7 @@ CONFIG_TOUCHSCREEN_DA9052=y
> > CONFIG_TOUCHSCREEN_EGALAX=y
> > CONFIG_TOUCHSCREEN_GOODIX=y
> > CONFIG_TOUCHSCREEN_ILI210X=y
> > +CONFIG_TOUCHSCREEN_WACOM_I2C=y
> > CONFIG_TOUCHSCREEN_MAX11801=y
> > CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
> > CONFIG_TOUCHSCREEN_EDT_FT5X06=y
> > --
> > 2.29.2
> >
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
