On Tue, Jan 19, 2021 at 6:15 PM Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> wrote: > > Hi Alistair, > > On Sat, Jan 16, 2021 at 08:24:26PM -0800, Alistair Francis wrote: > > Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx> > > --- > > .../input/touchscreen/wacom,wacom-i2c.yaml | 55 +++++++++++++++++++ > > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > > 2 files changed, 57 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/wacom,wacom-i2c.yaml > > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/wacom,wacom-i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/wacom,wacom-i2c.yaml > > new file mode 100644 > > index 000000000000..6b0e0034f836 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/input/touchscreen/wacom,wacom-i2c.yaml > > @@ -0,0 +1,55 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/input/touchscreen/wacom,wacom-i2c.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Wacom I2C Controller > > + > > +maintainers: > > + - Alistair Francis <alistair@xxxxxxxxxxxxx> > > + > > +allOf: > > + - $ref: touchscreen.yaml# > > + > > +properties: > > + compatible: > > + const: wacom,wacom-i2c > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + flip-tilt-x: > > + flip-tilt-y: > > Does the device support tilt? The driver does not, at least at the > moment. Also, does it make sense to flip tilt but not position? > > > + flip-pos-x: > > + flip-pos-y: > > This needs to use standard touchscreen properties. See > Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > > > + flip-distance: > > I am having trouble understanding when this one would be useful. Thanks for the review. These came from the original out of tree DT. I have removed them, I'm planning on using the standard touchscreen ones you pointed out if they are required. Alistair > > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include "dt-bindings/interrupt-controller/irq.h" > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + digitiser@9 { > > + compatible = "wacom,wacom-i2c"; > > + reg = <0x9>; > > + interrupt-parent = <&gpio1>; > > + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; > > + flip-tilt-x; > > + flip-tilt-y; > > + flip-pos-x; > > + flip-pos-y; > > + flip-distance; > > + }; > > + }; > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > > index 041ae90b0d8f..5bca22f035a3 100644 > > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > > @@ -1202,6 +1202,8 @@ patternProperties: > > description: Vision Optical Technology Co., Ltd. > > "^vxt,.*": > > description: VXT Ltd > > + "^wacom,.*": > > + description: Wacom Co., Ltd > > "^wand,.*": > > description: Wandbord (Technexion) > > "^waveshare,.*": > > -- > > 2.29.2 > > > > Thanks. > > -- > Dmitry
