On Tue, 15 Dec 2020 13:44:43 +0800
Ye Xiang <xiang.ye@xxxxxxxxx> wrote:
> The Hinge sensor is a common custom sensor on laptops. It calculates
> the angle between the lid (screen) and the base (keyboard). In addition,
> it also exposes screen and the keyboard angles with respect to the
> ground. Applications can easily get laptop's status in space through
> this sensor, in order to display appropriate user interface.
>
> Signed-off-by: Ye Xiang <xiang.ye@xxxxxxxxx>
Hi.
A few things spotted on a fresh read through. If this is all that comes
up in this round of review, I can tidy them up whilst applying.
If you are doing a v5 for any reason, please fix them up whilst doing that.
Thanks,
Jonathan
> ---
> .../hid-sensors/hid-sensor-attributes.c | 2 +
> drivers/iio/position/Kconfig | 16 +
> drivers/iio/position/Makefile | 1 +
> .../position/hid-sensor-custom-intel-hinge.c | 391 ++++++++++++++++++
> 4 files changed, 410 insertions(+)
> create mode 100644 drivers/iio/position/hid-sensor-custom-intel-hinge.c
>
> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> index 442ff787f7af..5b822a4298a0 100644
> --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> @@ -71,6 +71,8 @@ static struct {
> {HID_USAGE_SENSOR_TEMPERATURE, HID_USAGE_SENSOR_UNITS_DEGREES, 1000, 0},
>
> {HID_USAGE_SENSOR_HUMIDITY, 0, 1000, 0},
> + {HID_USAGE_SENSOR_HINGE, 0, 0, 17453293},
> + {HID_USAGE_SENSOR_HINGE, HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293},
> };
>
> static void simple_div(int dividend, int divisor, int *whole,
> diff --git a/drivers/iio/position/Kconfig b/drivers/iio/position/Kconfig
> index eda67f008c5b..1576a6380b53 100644
> --- a/drivers/iio/position/Kconfig
> +++ b/drivers/iio/position/Kconfig
> @@ -16,4 +16,20 @@ config IQS624_POS
> To compile this driver as a module, choose M here: the module
> will be called iqs624-pos.
>
> +config HID_SENSOR_CUSTOM_INTEL_HINGE
> + depends on HID_SENSOR_HUB
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> + select HID_SENSOR_IIO_COMMON
> + select HID_SENSOR_IIO_TRIGGER
> + tristate "HID Hinge"
> + help
> + This sensor present three angles, hinge angel, screen angles
> + and keyboard angle respect to horizon (ground).
> + Say yes here to build support for the HID custom
> + intel hinge sensor.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called hid-sensor-custom-hinge.
> +
> endmenu
> diff --git a/drivers/iio/position/Makefile b/drivers/iio/position/Makefile
> index 3cbe7a734352..d70902f2979d 100644
> --- a/drivers/iio/position/Makefile
> +++ b/drivers/iio/position/Makefile
> @@ -4,4 +4,5 @@
>
> # When adding new entries keep the list in alphabetical order
>
> +obj-$(CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE) += hid-sensor-custom-intel-hinge.o
> obj-$(CONFIG_IQS624_POS) += iqs624-pos.o
> diff --git a/drivers/iio/position/hid-sensor-custom-intel-hinge.c b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> new file mode 100644
> index 000000000000..24cf31c039a3
> --- /dev/null
> +++ b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> @@ -0,0 +1,391 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * HID Sensors Driver
> + * Copyright (c) 2020, Intel Corporation.
> + */
> +#include <linux/hid-sensor-hub.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/platform_device.h>
> +
> +#include "../common/hid-sensors/hid-sensor-trigger.h"
> +
> +enum hinge_channel {
> + CHANNEL_SCAN_INDEX_HINGE_ANGLE,
> + CHANNEL_SCAN_INDEX_SCREEN_ANGLE,
> + CHANNEL_SCAN_INDEX_KEYBOARD_ANGLE,
> + CHANNEL_SCAN_INDEX_MAX,
> +};
> +
> +#define CHANNEL_SCAN_INDEX_TIMESTAMP CHANNEL_SCAN_INDEX_MAX
> +
> +static const u32 hinge_addresses[CHANNEL_SCAN_INDEX_MAX] = {
> + HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(1),
> + HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(2),
> + HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(3)
> +};
> +
> +static const char *const hinge_labels[CHANNEL_SCAN_INDEX_MAX] = { "hinge",
> + "screen",
> + "keyboard" };
> +
> +struct hinge_state {
> + struct iio_dev *indio_dev;
> + struct hid_sensor_hub_attribute_info hinge[CHANNEL_SCAN_INDEX_MAX];
> + struct hid_sensor_hub_callbacks callbacks;
> + struct hid_sensor_common common_attributes;
> + const char *labels[CHANNEL_SCAN_INDEX_MAX];
> + struct {
> + u32 hinge_val[3];
> + u64 timestamp __aligned(8);
> + } scan;
> +
> + int scale_pre_decml;
> + int scale_post_decml;
> + int scale_precision;
> + int value_offset;
> + u64 timestamp;
> +};
> +
> +/* Channel definitions */
> +static const struct iio_chan_spec hinge_channels[] = {
> + {
> + .type = IIO_ANGL,
> + .indexed = 1,
> + .channel = 0,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type =
> + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) |
> + BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_HYSTERESIS),
> + .scan_index = CHANNEL_SCAN_INDEX_HINGE_ANGLE,
> + .scan_type = {
> + .sign = 's',
> + .storagebits = 32,
> + },
> + }, {
> + .type = IIO_ANGL,
> + .indexed = 1,
> + .channel = 1,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type =
> + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) |
> + BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_HYSTERESIS),
> + .scan_index = CHANNEL_SCAN_INDEX_SCREEN_ANGLE,
> + .scan_type = {
> + .sign = 's',
> + .storagebits = 32,
> + },
> + }, {
> + .type = IIO_ANGL,
> + .indexed = 1,
> + .channel = 2,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type =
> + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) |
> + BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_HYSTERESIS),
> + .scan_index = CHANNEL_SCAN_INDEX_KEYBOARD_ANGLE,
> + .scan_type = {
> + .sign = 's',
> + .storagebits = 32,
> + },
> + },
> + IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP)
> +};
> +
> +/* Adjust channel real bits based on report descriptor */
> +static void hinge_adjust_channel_realbits(struct iio_chan_spec *channels,
> + int channel, int size)
> +{
> + channels[channel].scan_type.realbits = size * 8;
> +}
> +
> +/* Channel read_raw handler */
> +static int hinge_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val, int *val2,
> + long mask)
> +{
> + struct hinge_state *st = iio_priv(indio_dev);
> + struct hid_sensor_hub_device *hsdev;
> + int report_id;
> + int ret_type;
> + s32 min;
> +
> + hsdev = st->common_attributes.hsdev;
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + hid_sensor_power_state(&st->common_attributes, true);
> + report_id = st->hinge[chan->scan_index].report_id;
> + min = st->hinge[chan->scan_index].logical_minimum;
> + if (report_id < 0) {
> + hid_sensor_power_state(&st->common_attributes, false);
> + return -EINVAL;
> + }
> +
> + *val = sensor_hub_input_attr_get_raw_value(st->common_attributes.hsdev,
> + hsdev->usage,
> + hinge_addresses[chan->scan_index],
> + report_id,
> + SENSOR_HUB_SYNC, min < 0);
> +
> + hid_sensor_power_state(&st->common_attributes, false);
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = st->scale_pre_decml;
> + *val2 = st->scale_post_decml;
> + return st->scale_precision;
> + case IIO_CHAN_INFO_OFFSET:
> + *val = st->value_offset;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + ret_type = hid_sensor_read_samp_freq_value(&st->common_attributes,
> + val, val2);
> + return ret_type;
> + case IIO_CHAN_INFO_HYSTERESIS:
> + ret_type = hid_sensor_read_raw_hyst_value(&st->common_attributes,
> + val, val2);
> + return ret_type;
As below, I would return directly rather than use the local variable.
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +/* Channel write_raw handler */
> +static int hinge_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val, int val2,
> + long mask)
> +{
> + struct hinge_state *st = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + ret = hid_sensor_write_samp_freq_value(&st->common_attributes,
> + val, val2);
> + return ret;
If you happen to be respinning I'd go with the slightly shorter option of...
return hid_sensor_write_samp_freq_value(&st->common_attributes,
> + case IIO_CHAN_INFO_HYSTERESIS:
> + ret = hid_sensor_write_raw_hyst_value(&st->common_attributes,
> + val, val2);
> +
> + return ret;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int hinge_read_label(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, char *label)
> +{
> + struct hinge_state *st = iio_priv(indio_dev);
> +
> + return sprintf(label, "%s\n", st->labels[chan->channel]);
> +}
> +
> +static const struct iio_info hinge_info = {
> + .read_raw = hinge_read_raw,
> + .write_raw = hinge_write_raw,
> + .read_label = hinge_read_label,
> +};
> +
> +/*
> + * Callback handler to send event after all samples are received
> + * and captured.
> + */
> +static int hinge_proc_event(struct hid_sensor_hub_device *hsdev,
> + unsigned int usage_id, void *priv)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(priv);
> + struct hinge_state *st = iio_priv(indio_dev);
> +
> + if (atomic_read(&st->common_attributes.data_ready)) {
> + if (!st->timestamp)
> + st->timestamp = iio_get_time_ns(indio_dev);
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, &st->scan,
> + st->timestamp);
> +
> + st->timestamp = 0;
> + }
> + return 0;
> +}
> +
> +/* Capture samples in local storage */
> +static int hinge_capture_sample(struct hid_sensor_hub_device *hsdev,
> + unsigned int usage_id, size_t raw_len,
> + char *raw_data, void *priv)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(priv);
> + struct hinge_state *st = iio_priv(indio_dev);
> + int offset;
> +
> + switch (usage_id) {
> + case HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(1):
> + case HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(2):
> + case HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(3):
> + offset = usage_id - HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(1);
> + st->scan.hinge_val[offset] = *(u32 *)raw_data;
> + return 0;
> + case HID_USAGE_SENSOR_TIME_TIMESTAMP:
> + st->timestamp = hid_sensor_convert_timestamp(&st->common_attributes,
> + *(int64_t *)raw_data);
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +/* Parse report which is specific to an usage id */
> +static int hinge_parse_report(struct platform_device *pdev,
> + struct hid_sensor_hub_device *hsdev,
> + struct iio_chan_spec *channels,
> + unsigned int usage_id, struct hinge_state *st)
> +{
> + int ret;
> + int i;
> +
> + for (i = 0; i < CHANNEL_SCAN_INDEX_MAX; ++i) {
> + ret = sensor_hub_input_get_attribute_info(hsdev,
> + HID_INPUT_REPORT,
> + usage_id,
> + hinge_addresses[i],
> + &st->hinge[i]);
> + if (ret < 0)
> + return ret;
> +
> + hinge_adjust_channel_realbits(channels, i, st->hinge[i].size);
> + }
> +
> + st->scale_precision = hid_sensor_format_scale(HID_USAGE_SENSOR_HINGE,
> + &st->hinge[CHANNEL_SCAN_INDEX_HINGE_ANGLE],
> + &st->scale_pre_decml, &st->scale_post_decml);
> +
> + /* Set Sensitivity field ids, when there is no individual modifier */
> + if (st->common_attributes.sensitivity.index < 0) {
> + sensor_hub_input_get_attribute_info(hsdev,
> + HID_FEATURE_REPORT, usage_id,
> + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
> + HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(1),
> + &st->common_attributes.sensitivity);
> + dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
> + st->common_attributes.sensitivity.index,
> + st->common_attributes.sensitivity.report_id);
> + }
> +
> + return ret;
> +}
> +
> +/* Function to initialize the processing for usage id */
> +static int hid_hinge_probe(struct platform_device *pdev)
> +{
> + struct hinge_state *st;
> + struct iio_dev *indio_dev;
> + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
> + int ret;
> + int i;
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, indio_dev);
> +
> + st = iio_priv(indio_dev);
> + st->common_attributes.hsdev = hsdev;
> + st->common_attributes.pdev = pdev;
> + st->indio_dev = indio_dev;
> + for (i = 0; i < CHANNEL_SCAN_INDEX_MAX; i++)
> + st->labels[i] = hinge_labels[i];
> +
> + ret = hid_sensor_parse_common_attributes(hsdev, hsdev->usage,
> + &st->common_attributes);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to setup common attributes\n");
> + return ret;
> + }
> +
> + indio_dev->num_channels = ARRAY_SIZE(hinge_channels);
> + indio_dev->channels = devm_kmemdup(&indio_dev->dev, hinge_channels,
> + sizeof(hinge_channels), GFP_KERNEL);
> + if (!indio_dev->channels)
> + return -ENOMEM;
> +
> + ret = hinge_parse_report(pdev, hsdev,
> + (struct iio_chan_spec *)indio_dev->channels,
> + hsdev->usage, st);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to setup attributes\n");
> + return ret;
> + }
> +
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->info = &hinge_info;
> + indio_dev->name = "hinge";
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + atomic_set(&st->common_attributes.data_ready, 0);
> + ret = hid_sensor_setup_trigger(indio_dev, indio_dev->name,
> + &st->common_attributes);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "trigger setup failed\n");
> + return ret;
> + }
> +
> + st->callbacks.send_event = hinge_proc_event;
> + st->callbacks.capture_sample = hinge_capture_sample;
> + st->callbacks.pdev = pdev;
> + ret = sensor_hub_register_callback(hsdev, hsdev->usage, &st->callbacks);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "callback reg failed\n");
> + goto error_remove_trigger;
> + }
> +
> + ret = devm_iio_device_register(&pdev->dev, indio_dev);
Please don't mix devm and non devm functions. The first time we
hit a non devm function that needs manual unwinding, then all later functions
in probe should also go the manual unwind route.
What you have here leads to a remove order which is not the precise reverse of
probe and makes it a lot harder to review for subtle race conditions. In this
case you leave the userspace interface exposed whilst removing some of the
underlying infrastructure. I really don't want to have to figure out if
that is safe (probably isn't!)
Much better to just use iio_device_register here and
have an explicit iio_device_unregister in the remove function.
If nothing else comes up I can tidy that up whilst applying rather than
you needing to do a v5.
> + if (ret) {
> + dev_err(&pdev->dev, "device register failed\n");
> + goto error_remove_callback;
> + }
> +
> + return ret;
> +
> +error_remove_callback:
> + sensor_hub_remove_callback(hsdev, hsdev->usage);
> +error_remove_trigger:
> + hid_sensor_remove_trigger(indio_dev, &st->common_attributes);
> + return ret;
> +}
> +
> +/* Function to deinitialize the processing for usage id */
> +static int hid_hinge_remove(struct platform_device *pdev)
> +{
> + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> + struct hinge_state *st = iio_priv(indio_dev);
> +
> + sensor_hub_remove_callback(hsdev, hsdev->usage);
> + hid_sensor_remove_trigger(indio_dev, &st->common_attributes);
> +
> + return 0;
> +}
> +
> +static const struct platform_device_id hid_hinge_ids[] = {
> + {
> + /* Format: HID-SENSOR-INT-usage_id_in_hex_lowercase */
> + .name = "HID-SENSOR-INT-020b",
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, hid_hinge_ids);
> +
> +static struct platform_driver hid_hinge_platform_driver = {
> + .id_table = hid_hinge_ids,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .pm = &hid_sensor_pm_ops,
> + },
> + .probe = hid_hinge_probe,
> + .remove = hid_hinge_remove,
> +};
> +module_platform_driver(hid_hinge_platform_driver);
> +
> +MODULE_DESCRIPTION("HID Sensor INTEL Hinge");
> +MODULE_AUTHOR("Ye Xiang <xiang.ye@xxxxxxxxx>");
> +MODULE_LICENSE("GPL");
