The driver clears the general configuration register during the remove()
hook. This should also be done in case the driver exits on error.
This change move the clear of that register to the
devm_add_action_or_reset() hook.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
drivers/input/keyboard/adp5589-keys.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
index 0bd7170041e0..7d1ab0aa6b14 100644
--- a/drivers/input/keyboard/adp5589-keys.c
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -930,6 +930,14 @@ static int adp5589_keypad_add(struct adp5589_kpad *kpad, unsigned int revid)
return 0;
}
+static void adp5589_clear_config(void *data)
+{
+ struct i2c_client *client = data;
+ struct adp5589_kpad *kpad = i2c_get_clientdata(client);
+
+ adp5589_write(client, kpad->var->reg(ADP5589_GENERAL_CFG), 0);
+}
+
static int adp5589_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -976,6 +984,11 @@ static int adp5589_probe(struct i2c_client *client,
revid = (u8) ret & ADP5589_5_DEVICE_ID_MASK;
+ ret = devm_add_action_or_reset(&client->dev, adp5589_clear_config,
+ client);
+ if (ret < 0)
+ return ret;
+
if (pdata->keymapsize) {
ret = adp5589_keypad_add(kpad, revid);
if (ret)
@@ -999,15 +1012,6 @@ static int adp5589_probe(struct i2c_client *client,
return 0;
}
-static int adp5589_remove(struct i2c_client *client)
-{
- struct adp5589_kpad *kpad = i2c_get_clientdata(client);
-
- adp5589_write(client, kpad->var->reg(ADP5589_GENERAL_CFG), 0);
-
- return 0;
-}
-
#ifdef CONFIG_PM_SLEEP
static int adp5589_suspend(struct device *dev)
{
@@ -1059,7 +1063,6 @@ static struct i2c_driver adp5589_driver = {
.pm = &adp5589_dev_pm_ops,
},
.probe = adp5589_probe,
- .remove = adp5589_remove,
.id_table = adp5589_id,
};
--
2.17.1
