On Wed, Nov 04, 2020 at 04:24:23PM +0000, Lee Jones wrote:
> Fixes the following W=1 kernel build warning(s):
>
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'input_dev' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'client' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regmap' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'work' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'enable_gpio' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regulator' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'magnitude' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'mode' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'library' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'rated_voltage' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'overdrive_voltage' not described in 'drv260x_data'
> drivers/input/misc/drv260x.c:244: warning: Function parameter or member 'voltage' not described in 'drv260x_calculate_voltage'
>
> Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> Cc: Dan Murphy <dmurphy@xxxxxx>
> Cc: linux-input@xxxxxxxxxxxxxxx
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> drivers/input/misc/drv260x.c | 26 +++++++++++++-------------
> 1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
> index 79d7fa710a714..fabe106d499d4 100644
> --- a/drivers/input/misc/drv260x.c
> +++ b/drivers/input/misc/drv260x.c
> @@ -167,17 +167,17 @@
>
> /**
> * struct drv260x_data -
> - * @input_dev - Pointer to the input device
> - * @client - Pointer to the I2C client
> - * @regmap - Register map of the device
> - * @work - Work item used to off load the enable/disable of the vibration
> - * @enable_gpio - Pointer to the gpio used for enable/disabling
> - * @regulator - Pointer to the regulator for the IC
> - * @magnitude - Magnitude of the vibration event
> - * @mode - The operating mode of the IC (LRA_NO_CAL, ERM or LRA)
> - * @library - The vibration library to be used
> - * @rated_voltage - The rated_voltage of the actuator
> - * @overdriver_voltage - The over drive voltage of the actuator
> + * @input_dev: Pointer to the input device
> + * @client: Pointer to the I2C client
> + * @regmap: Register map of the device
> + * @work: Work item used to off load the enable/disable of the vibration
> + * @enable_gpio: Pointer to the gpio used for enable/disabling
> + * @regulator: Pointer to the regulator for the IC
> + * @magnitude: Magnitude of the vibration event
> + * @mode: The operating mode of the IC (LRA_NO_CAL, ERM or LRA)
> + * @library: The vibration library to be used
> + * @rated_voltage: The rated_voltage of the actuator
> + * @overdriver_voltage: The over drive voltage of the actuator
Applied with this typo fixed as well.
> **/
> struct drv260x_data {
> struct input_dev *input_dev;
> @@ -234,12 +234,12 @@ static const struct reg_default drv260x_reg_defs[] = {
> #define DRV260X_DEF_RATED_VOLT 0x90
> #define DRV260X_DEF_OD_CLAMP_VOLT 0x90
>
> -/**
> +/*
> * Rated and Overdriver Voltages:
> * Calculated using the formula r = v * 255 / 5.6
> * where r is what will be written to the register
> * and v is the rated or overdriver voltage of the actuator
> - **/
> + */
> static int drv260x_calculate_voltage(unsigned int voltage)
> {
> return (voltage * 255 / 5600);
> --
> 2.25.1
>
Thanks.
--
Dmitry
