[PATCH 3/3] iio: accel: bmc150-accel: Add rudimentary regulator support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



These Bosch accelerometers have two supplies, VDD and VDDIO.
Add some rudimentary support to obtain and enable these
regulators during probe() and disable them during remove()
or on the errorpath.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 drivers/iio/accel/bmc150-accel-core.c | 37 +++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 0dafe4052856..a69a4f54d69a 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -28,6 +28,7 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include "bmc150-accel.h"
 
@@ -184,6 +185,7 @@ enum bmc150_accel_trigger_id {
 
 struct bmc150_accel_data {
 	struct regmap *regmap;
+	struct regulator_bulk_data regulators[2];
 	int irq;
 	struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
 	struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
@@ -1593,10 +1595,35 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
 				     &data->orientation);
 	if (ret)
 		return ret;
+	/*
+	 * VDD   is the analog and digital domain voltage supply
+	 * VDDIO is the digital I/O voltage supply
+	 */
+	data->regulators[0].supply = "vdd";
+	data->regulators[1].supply = "vddio";
+	ret = devm_regulator_bulk_get(dev,
+				      ARRAY_SIZE(data->regulators),
+				      data->regulators);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get regulators %d\n", ret);
+		return ret;
+	}
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
+				    data->regulators);
+	if (ret) {
+		dev_err(dev, "failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+	/*
+	 * 2ms or 3ms power-on time according to datasheets, let's better
+	 * be safe than sorry and set this delay to 5ms.
+	 */
+	msleep(5);
 
 	ret = bmc150_accel_chip_init(data);
 	if (ret < 0)
-		return ret;
+		goto err_disable_regulators;
 
 	mutex_init(&data->mutex);
 
@@ -1613,7 +1640,7 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
 					 &bmc150_accel_buffer_ops);
 	if (ret < 0) {
 		dev_err(dev, "Failed: iio triggered buffer setup\n");
-		return ret;
+		goto err_disable_regulators;
 	}
 
 	if (data->irq > 0) {
@@ -1674,6 +1701,9 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
 	bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
 err_buffer_cleanup:
 	iio_triggered_buffer_cleanup(indio_dev);
+err_disable_regulators:
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+			       data->regulators);
 
 	return ret;
 }
@@ -1698,6 +1728,9 @@ int bmc150_accel_core_remove(struct device *dev)
 	bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, 0);
 	mutex_unlock(&data->mutex);
 
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+			       data->regulators);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(bmc150_accel_core_remove);
-- 
2.26.2




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux