Re: [PATCH v5 3/3] dt-bindings: touchscreen: Add binding for Novatek NT36xxx series driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Oct 17, 2020 at 09:01:52PM +0200, kholk11@xxxxxxxxx wrote:
> From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> 
> Add binding for the Novatek NT36xxx series touchscreen driver.
> 
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> ---
>  .../bindings/input/touchscreen/nt36xxx.yaml   | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/nt36xxx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/nt36xxx.yaml b/Documentation/devicetree/bindings/input/touchscreen/nt36xxx.yaml
> new file mode 100644
> index 000000000000..1486b20d6c49
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/nt36xxx.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/nt36xxx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Novatek NT36xxx series touchscreen controller Bindings
> +
> +maintainers:
> +  - AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> +
> +allOf:
> +  - $ref: touchscreen.yaml#
> +
> +properties:
> +  compatible:
> +    const: novatek,nt36525
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: Power supply regulator for VDD pin
> +
> +  vio-supply:
> +    description: Power supply regulator on VDD-IO pin
> +
> +unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      touchscreen@62 {
> +        compatible = "novatek,nt36525";
> +        reg = <0x62>;
> +        interrupt-parent = <&tlmm>;
> +        interrupts = <45 IRQ_TYPE_EDGE_RISING>;
> +        reset-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;

reset-gpios

Best regards,
Krzysztof




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux