This patch adds bindings for the D0 order code of the device. This
order code represents an OTP variant that enables a touch-and-hold
function in place of slider 1.
Also included is the ability to specify the 00 order code (default
option with no OTP customization) explicitly.
Signed-off-by: Jeff LaBundy <jeff@xxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/input/iqs269a.yaml | 30 +++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
index e13812d..56a628e 100644
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -17,7 +17,10 @@ description: |
properties:
compatible:
- const: azoteq,iqs269a
+ enum:
+ - azoteq,iqs269a
+ - azoteq,iqs269a-00
+ - azoteq,iqs269a-d0
reg:
maxItems: 1
@@ -210,6 +213,16 @@ properties:
default: 1
description: Specifies the slider coordinate filter strength.
+ azoteq,touch-hold-ms:
+ multipleOf: 256
+ minimum: 256
+ maximum: 65280
+ default: 5120
+ description:
+ Specifies the length of time (in ms) for which the channel selected by
+ 'azoteq,gpio3-select' must be held in a state of touch in order for an
+ approximately 60-ms pulse to be asserted on the GPIO4 pin.
+
linux,keycodes:
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
@@ -514,6 +527,21 @@ patternProperties:
additionalProperties: false
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - azoteq,iqs269a-d0
+then:
+ patternProperties:
+ "^channel@[0-7]$":
+ properties:
+ azoteq,slider1-select: false
+else:
+ properties:
+ azoteq,touch-hold-ms: false
+
required:
- compatible
- reg
--
2.7.4
