Hi Mani, On Sat, Aug 22, 2020 at 06:43:43PM +0530, Manivannan Sadhasivam wrote: > Hi Cristi, > > Thanks for the series! I'll take a look soon but there is a quick comment > below. > > On Sat, Aug 22, 2020 at 01:26:53AM +0300, Cristian Ciocaltea wrote: > > I have just realized I had omitted the changelog - sorry: > > > > Changes in v2: > > - Reworked MFD core & I2C driver > > * Integrated Lee's feedback > > * Added support for using the regmap within atomic contexts > > * Added support for ATC2603C chip variant > > * Reorganized KConfig entries > > - Improved regulator driver > > * Added support for ATC2603C variant > > * Used helper macros for more compact specification of regulator_desc items > > * Added more regulator capabilities > > - Added power controller driver > > * Provides system poweroff/reboot functionalities > > * Requires support for I2C Atomic transfers in the Owl driver (already submitted) > > - Added onkey driver: exposes the power button as an input device > > - Added yaml binding doc > > - Rebased patchset on kernel v5.9-rc1 > > > > Kind regards, > > Cristi > > > > On Sat, Aug 22, 2020 at 01:19:46AM +0300, Cristian Ciocaltea wrote: > > > This is re-spin of the patch series submitted some time ago by Mani, > > > who added initial support (MFD core and regulators) for the Actions > > > Semi ATC260x PMICs: > > > https://lore.kernel.org/lkml/20190617155011.15376-1-manivannan.sadhasivam@xxxxxxxxxx/ > > > > > > The ATC260x family of PMICs integrates Audio Codec, Power management, > > > Clock generation and GPIO controller blocks. There are currently 3 > > > variants: ATC2603A, ATC2603C and ATC2609A. > > > > > > In addition to the ATC2609A regulator functionality provided that time, > > > this patchset adds support for the ATC2603C variant, together with some > > > new functionalities for both chips: power controller and onkey input. > > > The ATC2603A variant remains unsupported for the moment. > > > > > > This has been tested on RoseapplePi, a SBC based on the Action Semi S500 > > > SoC, which integrates ATC2603C PMIC. An initial support for this board > > > has been already submitted: > > > https://lore.kernel.org/lkml/cover.1592123160.git.cristian.ciocaltea@xxxxxxxxx/ > > > > > > Please note that enabling the ATC260x PMICs on the compatible Actions > > > Semi Owl SoC based boards depends on the following: > > > > > > * Actions Semi SIRQ driver (for PMIC DTS setup): > > > https://lore.kernel.org/lkml/cover.1597852360.git.cristian.ciocaltea@xxxxxxxxx/ > > > > > > * I2C Atomic transfers in Actions Semi Owl driver (for proper operation > > > of the power controller driver): > > > https://lore.kernel.org/lkml/b086ef6d355d9730c839359e15eb06175283e323.1596485741.git.cristian.ciocaltea@xxxxxxxxx/ > > > > > > Thanks, > > > Cristi > > > > > > Cristian Ciocaltea (6): > > > dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding > > > mfd: Add MFD driver for ATC260x PMICs > > > regulator: Add regulator driver for ATC260x PMICs > > You need to preserve my authorship for above two patches. Adding the signed-off-by > is not enough. I'm very sorry for the mistake, I was not aware of the correct reposting procedure. Should I resend the series now or could we handle a first round of review before? Thanks, Cristi > > > power: reset: Add poweroff driver for ATC260x PMICs > > > input: atc260x: Add onkey driver for ATC260x PMICs > > > MAINTAINERS: Add entry for ATC260x PMIC > > I think this one too. > > Thanks, > Mani > > > > > > > .../bindings/mfd/actions,atc260x.yaml | 221 ++++++++ > > > MAINTAINERS | 12 + > > > drivers/input/misc/Kconfig | 11 + > > > drivers/input/misc/Makefile | 2 +- > > > drivers/input/misc/atc260x-onkey.c | 304 +++++++++++ > > > drivers/mfd/Kconfig | 18 + > > > drivers/mfd/Makefile | 3 + > > > drivers/mfd/atc260x-core.c | 290 ++++++++++ > > > drivers/mfd/atc260x-i2c.c | 73 +++ > > > drivers/power/reset/Kconfig | 8 +- > > > drivers/power/reset/Makefile | 1 + > > > drivers/power/reset/atc260x-poweroff.c | 274 ++++++++++ > > > drivers/regulator/Kconfig | 8 + > > > drivers/regulator/Makefile | 1 + > > > drivers/regulator/atc260x-regulator.c | 511 ++++++++++++++++++ > > > include/linux/mfd/atc260x/atc2603c.h | 281 ++++++++++ > > > include/linux/mfd/atc260x/atc2609a.h | 308 +++++++++++ > > > include/linux/mfd/atc260x/core.h | 86 +++ > > > 18 files changed, 2410 insertions(+), 2 deletions(-) > > > create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml > > > create mode 100644 drivers/input/misc/atc260x-onkey.c > > > create mode 100644 drivers/mfd/atc260x-core.c > > > create mode 100644 drivers/mfd/atc260x-i2c.c > > > create mode 100644 drivers/power/reset/atc260x-poweroff.c > > > create mode 100644 drivers/regulator/atc260x-regulator.c > > > create mode 100644 include/linux/mfd/atc260x/atc2603c.h > > > create mode 100644 include/linux/mfd/atc260x/atc2609a.h > > > create mode 100644 include/linux/mfd/atc260x/core.h > > > > > > -- > > > 2.28.0 > > >
