Hi,
I am seeing the following warning on a imx28-evk running linux-next:
[ 7.625012] ------------[ cut here ]------------
[ 7.630111] WARNING: CPU: 0 PID: 1 at drivers/base/platform.c:317
__platform_get_irq_byname+0x74/0x90
[ 7.639692] 0 is an invalid IRQ number
[ 7.643540] Modules linked in:
[ 7.646961] CPU: 0 PID: 1 Comm: swapper Not tainted
5.8.0-rc1-next-20200616-dirty #92
[ 7.654896] Hardware name: Freescale MXS (Device Tree)
[ 7.660434] [<c00105ec>] (unwind_backtrace) from [<c000e070>]
(show_stack+0x10/0x14)
[ 7.668591] [<c000e070>] (show_stack) from [<c001aa90>] (__warn+0xe4/0x108)
[ 7.675941] [<c001aa90>] (__warn) from [<c001ab20>]
(warn_slowpath_fmt+0x6c/0xb8)
[ 7.683575] [<c001ab20>] (warn_slowpath_fmt) from [<c0491b44>]
(__platform_get_irq_byname+0x74/0x90)
[ 7.693101] [<c0491b44>] (__platform_get_irq_byname) from
[<c0491b70>] (platform_get_irq_byname+0x10/0x48)
[ 7.703154] [<c0491b70>] (platform_get_irq_byname) from
[<c056e234>] (mxs_lradc_ts_probe+0x190/0x384)
[ 7.712771] [<c056e234>] (mxs_lradc_ts_probe) from [<c0491850>]
(platform_drv_probe+0x48/0x98)
[ 7.722806] [<c0491850>] (platform_drv_probe) from [<c048f7f0>]
(really_probe+0x218/0x348)
[ 7.731530] [<c048f7f0>] (really_probe) from [<c048fa28>]
(driver_probe_device+0x58/0xb4)
[ 7.740189] [<c048fa28>] (driver_probe_device) from [<c048fc2c>]
(device_driver_attach+0x58/0x60)
[ 7.749471] [<c048fc2c>] (device_driver_attach) from [<c048fcb8>]
(__driver_attach+0x84/0xc0)
[ 7.758394] [<c048fcb8>] (__driver_attach) from [<c048db28>]
(bus_for_each_dev+0x70/0xb4)
[ 7.766977] [<c048db28>] (bus_for_each_dev) from [<c048eb24>]
(bus_add_driver+0x154/0x1e0)
[ 7.775385] [<c048eb24>] (bus_add_driver) from [<c0490774>]
(driver_register+0x74/0x108)
[ 7.783872] [<c0490774>] (driver_register) from [<c000a2fc>]
(do_one_initcall+0x68/0x268)
[ 7.792467] [<c000a2fc>] (do_one_initcall) from [<c0a00fa0>]
(kernel_init_freeable+0x160/0x1f4)
[ 7.801661] [<c0a00fa0>] (kernel_init_freeable) from [<c0720c58>]
(kernel_init+0x8/0xf4)
[ 7.810165] [<c0720c58>] (kernel_init) from [<c0008510>]
(ret_from_fork+0x14/0x24)
[ 7.818101] Exception stack(0xc748dfb0 to 0xc748dff8)
[ 7.823273] dfa0: 00000000
00000000 00000000 00000000
[ 7.831815] dfc0: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[ 7.840351] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 7.847322] irq event stamp: 273303
[ 7.850940] hardirqs last enabled at (273311): [<c0066ed8>]
console_unlock+0x390/0x534
[ 7.859314] hardirqs last disabled at (273328): [<c0066b8c>]
console_unlock+0x44/0x534
[ 7.867605] softirqs last enabled at (273344): [<c00097fc>]
__do_softirq+0x2d4/0x450
[ 7.875817] softirqs last disabled at (273355): [<c001fe48>]
irq_exit+0x150/0x174
[ 7.883472] ---[ end trace ddb222ada5cbf5cd ]---
[ 7.900004] input: mxs-lradc-ts as
/devices/soc0/80000000.apb/80040000.apbx/80050000.lradc/mxs-lradc-ts/input/input0
The touchscreen irq is defined as:
enum mx28_lradc_irqs {
MX28_LRADC_TS_IRQ = 0,
Shouldn't we retrieve the IRQ number from the device tree instead?
Thanks,
Fabio Estevam
