Re: [PATCH v4 3/3] Input: ads7846: Switch to devm initialization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dmitry,

Can this series be merged?


Thanks,
Daniel


On 5/20/20 11:05 AM, Marco Felsch wrote:
> On 20-05-19 20:25, Daniel Mack wrote:
>> This simplies the code a lot and fixes some potential resource leaks in
>> the error return paths.
>>
>> Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
> 
> Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> 
>> ---
>>  drivers/input/touchscreen/ads7846.c | 125 ++++++++++------------------
>>  1 file changed, 46 insertions(+), 79 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
>> index 4635e8867d10..88edff7f177d 100644
>> --- a/drivers/input/touchscreen/ads7846.c
>> +++ b/drivers/input/touchscreen/ads7846.c
>> @@ -98,10 +98,6 @@ struct ads7846 {
>>  	struct spi_device	*spi;
>>  	struct regulator	*reg;
>>  
>> -#if IS_ENABLED(CONFIG_HWMON)
>> -	struct device		*hwmon;
>> -#endif
>> -
>>  	u16			model;
>>  	u16			vref_mv;
>>  	u16			vref_delay_usecs;
>> @@ -513,6 +509,8 @@ __ATTRIBUTE_GROUPS(ads7846_attr);
>>  
>>  static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
>>  {
>> +	struct device *hwmon;
>> +
>>  	/* hwmon sensors need a reference voltage */
>>  	switch (ts->model) {
>>  	case 7846:
>> @@ -533,17 +531,11 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
>>  		break;
>>  	}
>>  
>> -	ts->hwmon = hwmon_device_register_with_groups(&spi->dev, spi->modalias,
>> -						      ts, ads7846_attr_groups);
>> +	hwmon = devm_hwmon_device_register_with_groups(&spi->dev,
>> +						       spi->modalias, ts,
>> +						       ads7846_attr_groups);
>>  
>> -	return PTR_ERR_OR_ZERO(ts->hwmon);
>> -}
>> -
>> -static void ads784x_hwmon_unregister(struct spi_device *spi,
>> -				     struct ads7846 *ts)
>> -{
>> -	if (ts->hwmon)
>> -		hwmon_device_unregister(ts->hwmon);
>> +	return PTR_ERR_OR_ZERO(hwmon);
>>  }
>>  
>>  #else
>> @@ -552,11 +544,6 @@ static inline int ads784x_hwmon_register(struct spi_device *spi,
>>  {
>>  	return 0;
>>  }
>> -
>> -static inline void ads784x_hwmon_unregister(struct spi_device *spi,
>> -					    struct ads7846 *ts)
>> -{
>> -}
>>  #endif
>>  
>>  static ssize_t ads7846_pen_down_show(struct device *dev,
>> @@ -949,8 +936,8 @@ static int ads7846_setup_pendown(struct spi_device *spi,
>>  		ts->get_pendown_state = pdata->get_pendown_state;
>>  	} else if (gpio_is_valid(pdata->gpio_pendown)) {
>>  
>> -		err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN,
>> -				       "ads7846_pendown");
>> +		err = devm_gpio_request_one(&spi->dev, pdata->gpio_pendown,
>> +					    GPIOF_IN, "ads7846_pendown");
>>  		if (err) {
>>  			dev_err(&spi->dev,
>>  				"failed to request/setup pendown GPIO%d: %d\n",
>> @@ -1266,6 +1253,11 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
>>  }
>>  #endif
>>  
>> +static void ads7846_regulator_disable(void *regulator)
>> +{
>> +	regulator_disable(regulator);
>> +}
>> +
>>  static int ads7846_probe(struct spi_device *spi)
>>  {
>>  	const struct ads7846_platform_data *pdata;
>> @@ -1299,13 +1291,17 @@ static int ads7846_probe(struct spi_device *spi)
>>  	if (err < 0)
>>  		return err;
>>  
>> -	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
>> -	packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
>> -	input_dev = input_allocate_device();
>> -	if (!ts || !packet || !input_dev) {
>> -		err = -ENOMEM;
>> -		goto err_free_mem;
>> -	}
>> +	ts = devm_kzalloc(dev, sizeof(struct ads7846), GFP_KERNEL);
>> +	if (!ts)
>> +		return -ENOMEM;
>> +
>> +	packet = devm_kzalloc(dev, sizeof(struct ads7846_packet), GFP_KERNEL);
>> +	if (!packet)
>> +		return -ENOMEM;
>> +
>> +	input_dev = devm_input_allocate_device(dev);
>> +	if (!input_dev)
>> +		return -ENOMEM;
>>  
>>  	spi_set_drvdata(spi, ts);
>>  
>> @@ -1319,10 +1315,8 @@ static int ads7846_probe(struct spi_device *spi)
>>  	pdata = dev_get_platdata(dev);
>>  	if (!pdata) {
>>  		pdata = ads7846_probe_dt(dev);
>> -		if (IS_ERR(pdata)) {
>> -			err = PTR_ERR(pdata);
>> -			goto err_free_mem;
>> -		}
>> +		if (IS_ERR(pdata))
>> +			return PTR_ERR(pdata);
>>  	}
>>  
>>  	ts->model = pdata->model ? : 7846;
>> @@ -1344,7 +1338,7 @@ static int ads7846_probe(struct spi_device *spi)
>>  
>>  	err = ads7846_setup_pendown(spi, ts, pdata);
>>  	if (err)
>> -		goto err_free_mem;
>> +		return err;
>>  
>>  	if (pdata->penirq_recheck_delay_usecs)
>>  		ts->penirq_recheck_delay_usecs =
>> @@ -1391,41 +1385,47 @@ static int ads7846_probe(struct spi_device *spi)
>>  
>>  	ads7846_setup_spi_msg(ts, pdata);
>>  
>> -	ts->reg = regulator_get(dev, "vcc");
>> +	ts->reg = devm_regulator_get(dev, "vcc");
>>  	if (IS_ERR(ts->reg)) {
>>  		err = PTR_ERR(ts->reg);
>>  		dev_err(dev, "unable to get regulator: %d\n", err);
>> -		goto err_free_gpio;
>> +		return err;
>>  	}
>>  
>>  	err = regulator_enable(ts->reg);
>>  	if (err) {
>>  		dev_err(dev, "unable to enable regulator: %d\n", err);
>> -		goto err_put_regulator;
>> +		return err;
>>  	}
>>  
>> +	err = devm_add_action_or_reset(dev, ads7846_regulator_disable, ts->reg);
>> +	if (err)
>> +		return err;
>> +
>>  	irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING;
>>  	irq_flags |= IRQF_ONESHOT;
>>  
>> -	err = request_threaded_irq(spi->irq, ads7846_hard_irq, ads7846_irq,
>> -				   irq_flags, dev->driver->name, ts);
>> +	err = devm_request_threaded_irq(dev, spi->irq,
>> +					ads7846_hard_irq, ads7846_irq,
>> +					irq_flags, dev->driver->name, ts);
>>  	if (err && !pdata->irq_flags) {
>>  		dev_info(dev,
>>  			"trying pin change workaround on irq %d\n", spi->irq);
>>  		irq_flags |= IRQF_TRIGGER_RISING;
>> -		err = request_threaded_irq(spi->irq,
>> -				  ads7846_hard_irq, ads7846_irq,
>> -				  irq_flags, dev->driver->name, ts);
>> +		err = devm_request_threaded_irq(dev, spi->irq,
>> +						ads7846_hard_irq, ads7846_irq,
>> +						irq_flags, dev->driver->name,
>> +						ts);
>>  	}
>>  
>>  	if (err) {
>>  		dev_dbg(dev, "irq %d busy?\n", spi->irq);
>> -		goto err_disable_regulator;
>> +		return err;
>>  	}
>>  
>>  	err = ads784x_hwmon_register(spi, ts);
>>  	if (err)
>> -		goto err_free_irq;
>> +		return err;
>>  
>>  	dev_info(dev, "touchscreen, irq %d\n", spi->irq);
>>  
>> @@ -1440,7 +1440,7 @@ static int ads7846_probe(struct spi_device *spi)
>>  
>>  	err = sysfs_create_group(&dev->kobj, &ads784x_attr_group);
>>  	if (err)
>> -		goto err_remove_hwmon;
>> +		return err;
>>  
>>  	err = input_register_device(input_dev);
>>  	if (err)
>> @@ -1459,21 +1459,7 @@ static int ads7846_probe(struct spi_device *spi)
>>  
>>   err_remove_attr_group:
>>  	sysfs_remove_group(&dev->kobj, &ads784x_attr_group);
>> - err_remove_hwmon:
>> -	ads784x_hwmon_unregister(spi, ts);
>> - err_free_irq:
>> -	free_irq(spi->irq, ts);
>> - err_disable_regulator:
>> -	regulator_disable(ts->reg);
>> - err_put_regulator:
>> -	regulator_put(ts->reg);
>> - err_free_gpio:
>> -	if (!ts->get_pendown_state)
>> -		gpio_free(ts->gpio_pendown);
>> - err_free_mem:
>> -	input_free_device(input_dev);
>> -	kfree(packet);
>> -	kfree(ts);
>> +
>>  	return err;
>>  }
>>  
>> @@ -1482,26 +1468,7 @@ static int ads7846_remove(struct spi_device *spi)
>>  	struct ads7846 *ts = spi_get_drvdata(spi);
>>  
>>  	sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
>> -
>> -	ads7846_disable(ts);
>> -	free_irq(ts->spi->irq, ts);
>> -
>> -	input_unregister_device(ts->input);
>> -
>> -	ads784x_hwmon_unregister(spi, ts);
>> -
>> -	regulator_put(ts->reg);
>> -
>> -	if (!ts->get_pendown_state) {
>> -		/*
>> -		 * If we are not using specialized pendown method we must
>> -		 * have been relying on gpio we set up ourselves.
>> -		 */
>> -		gpio_free(ts->gpio_pendown);
>> -	}
>> -
>> -	kfree(ts->packet);
>> -	kfree(ts);
>> +	ads7846_stop(ts);
>>  
>>  	dev_dbg(&spi->dev, "unregistered touchscreen\n");
>>  
>> -- 
>> 2.26.2
>>
>>
> 





[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux