On Fri, May 29, 2020 at 09:56:20AM +0800, Fengping Yu wrote:
> From: "fengping.yu" <fengping.yu@xxxxxxxxxxxx>
>
> This adds matrix keypad support for Mediatek SoCs.
FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
One comment to the code below, up to Dmitry to decide.
P.S. If you ignore tags given you, people will be discouraged to review your
contribution. Yes, I'm talking about Marco's ones.
> Signed-off-by: fengping.yu <fengping.yu@xxxxxxxxxxxx>
> ---
> drivers/input/keyboard/Kconfig | 11 ++
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/mtk-kpd.c | 205 +++++++++++++++++++++++++++++++
> 3 files changed, 217 insertions(+)
> create mode 100644 drivers/input/keyboard/mtk-kpd.c
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 28de965a08d5..0803668bfa36 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -782,6 +782,17 @@ config KEYBOARD_BCM
> To compile this driver as a module, choose M here: the
> module will be called bcm-keypad.
>
> +config KEYBOARD_MTK_KPD
> + tristate "MediaTek Keypad Support"
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + select REGMAP_MMIO
> + select INPUT_MATRIXKMAP
> + help
> + Say Y here if you want to use the keypad on MediaTek SoCs.
> + If unsure, say N.
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-kpd.
> +
> config KEYBOARD_MTK_PMIC
> tristate "MediaTek PMIC keys support"
> depends on MFD_MT6397
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 1d689fdd5c00..6c9d852c377e 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -43,6 +43,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
> obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
> obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
> obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
> +obj-$(CONFIG_KEYBOARD_MTK_KPD) += mtk-kpd.o
> obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o
> obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
> obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
> diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
> new file mode 100644
> index 000000000000..0a6b8e2530bc
> --- /dev/null
> +++ b/drivers/input/keyboard/mtk-kpd.c
> @@ -0,0 +1,205 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + * Author Terry Chang <terry.chang@xxxxxxxxxxxx>
> + */
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/input/matrix_keypad.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define MTK_KPD_NAME "mtk-kpd"
> +#define MTK_KPD_MEM 0x0004
> +#define MTK_KPD_DEBOUNCE 0x0018
> +#define MTK_KPD_DEBOUNCE_MASK GENMASK(13, 0)
> +#define MTK_KPD_DEBOUNCE_MAX_US 256000
> +#define MTK_KPD_NUM_MEMS 5
> +#define MTK_KPD_NUM_BITS 136 /* 4*32+8 MEM5 only use 8 BITS */
> +
> +struct mtk_keypad {
> + struct regmap *regmap;
> + struct input_dev *input_dev;
> + struct clk *clk;
> + void __iomem *base;
> + u32 n_rows;
> + u32 n_cols;
> + DECLARE_BITMAP(keymap_state, MTK_KPD_NUM_BITS);
> +};
> +
> +static const struct regmap_config keypad_regmap_cfg = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = sizeof(u32),
> + .max_register = 36,
> +};
> +
> +static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
> +{
> + struct mtk_keypad *keypad = dev_id;
> + unsigned short *keycode = keypad->input_dev->keycode;
> + DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
> + DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
> + int bit_nr;
> + int pressed;
> + unsigned short code;
> +
> + regmap_raw_read(keypad->regmap, MTK_KPD_MEM,
> + new_state, MTK_KPD_NUM_MEMS);
> +
> + bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS);
> +
> + for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) {
> + /* 1: not pressed, 0: pressed */
> + pressed = !test_bit(bit_nr, new_state);
> + dev_dbg(&keypad->input_dev->dev, "%s",
> + pressed ? "pressed" : "released");
> +
> + /* 32bit register only use low 16bit as keypad mem register */
> + code = keycode[bit_nr - 16 * (BITS_TO_U32(bit_nr) - 1)];
> +
> + input_report_key(keypad->input_dev, code, pressed);
> + input_sync(keypad->input_dev);
> +
> + dev_dbg(&keypad->input_dev->dev,
> + "report Linux keycode = %d\n", code);
> + }
> +
> + bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void kpd_clk_disable(void *data)
> +{
> + clk_disable_unprepare(data);
> +}
> +
> +static int kpd_pdrv_probe(struct platform_device *pdev)
> +{
> + struct mtk_keypad *keypad;
> + unsigned int irq;
> + u32 debounce;
> + bool wakeup;
> + int ret;
> +
> + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
> + if (!keypad)
> + return -ENOMEM;
> +
> + keypad->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(keypad->base))
> + return PTR_ERR(keypad->base);
> +
> + keypad->regmap = devm_regmap_init_mmio(&pdev->dev,
> + keypad->base,
> + &keypad_regmap_cfg);
> + if (IS_ERR(keypad->regmap)) {
> + dev_err(&pdev->dev,
> + "regmap init failed:%ld\n", PTR_ERR(keypad->regmap));
> + return PTR_ERR(keypad->regmap);
> + }
> +
> + bitmap_fill(keypad->keymap_state, MTK_KPD_NUM_BITS);
> +
> + keypad->input_dev = devm_input_allocate_device(&pdev->dev);
> + if (!keypad->input_dev) {
> + dev_err(&pdev->dev, "Failed to allocate input dev\n");
> + return -ENOMEM;
> + }
> +
> + keypad->input_dev->name = MTK_KPD_NAME;
> + keypad->input_dev->id.bustype = BUS_HOST;
> +
> + ret = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows,
> + &keypad->n_cols);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to parse keypad params\n");
> + return ret;
> + }
> +
> + if (device_property_read_u32(&pdev->dev, "mediatek,debounce-us",
> + &debounce))
> + debounce = 16000;
> +
> + if (debounce > MTK_KPD_DEBOUNCE_MAX_US) {
> + dev_err(&pdev->dev, "Debounce time exceeds the maximum allowed time %dus\n",
> + MTK_KPD_DEBOUNCE_MAX_US);
> + return -EINVAL;
> + }
> +
> + wakeup = device_property_read_bool(&pdev->dev, "wakeup-source");
> +
> + dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n",
> + keypad->n_rows, keypad->n_cols, debounce);
> +
> + ret = matrix_keypad_build_keymap(NULL, NULL,
> + keypad->n_rows,
> + keypad->n_cols,
> + NULL,
> + keypad->input_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to build keymap\n");
> + return ret;
> + }
> +
> + regmap_write(keypad->regmap, MTK_KPD_DEBOUNCE,
> + debounce * 32 / 1000 & MTK_KPD_DEBOUNCE_MASK);
> +
> + keypad->clk = devm_clk_get(&pdev->dev, "kpd");
> + if (IS_ERR(keypad->clk))
> + return keypad->clk;
> +
> + ret = clk_prepare_enable(keypad->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n");
> + return ret;
> + }
> +
> + ret = devm_add_action_or_reset(&pdev->dev, kpd_clk_disable, keypad->clk);
> + if (ret)
> + return ret;
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + ret = devm_request_threaded_irq(&pdev->dev, irq,
> + NULL, kpd_irq_handler, 0,
> + MTK_KPD_NAME, keypad);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to request IRQ#%d:%d\n",
> + irq, ret);
> + return ret;
> + }
> +
> + ret = input_register_device(keypad->input_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register device\n");
> + return ret;
> + }
> +
> + return device_init_wakeup(&pdev->dev, wakeup);
I'm not sure that it's good idea to fail the probe if we can't register wake up
source. Keypad is still working, right? Perhaps simple warning?
> +}
> +
> +static const struct of_device_id kpd_of_match[] = {
> + { .compatible = "mediatek,mt6779-keypad" },
> + { .compatible = "mediatek,mt6873-keypad" },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver kpd_pdrv = {
> + .probe = kpd_pdrv_probe,
> + .driver = {
> + .name = MTK_KPD_NAME,
> + .of_match_table = kpd_of_match,
> + },
> +};
> +module_platform_driver(kpd_pdrv);
> +
> +MODULE_AUTHOR("Mediatek Corporation");
> +MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.18.0
--
With Best Regards,
Andy Shevchenko
