The address referenced in this binding is within the Qualcomm Clock
namespace so let's drop the msm-vibrator bindings so that a more
generic solution can be used instead. No one is currently using these
bindings so this won't affect any users.
Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/input/msm-vibrator.txt | 36 -------------------
1 file changed, 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/msm-vibrator.txt
diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
deleted file mode 100644
index 8dcf014ef2e5..000000000000
--- a/Documentation/devicetree/bindings/input/msm-vibrator.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Device tree bindings for the Qualcomm MSM vibrator
-
-Required properties:
-
- - compatible: Should be one of
- "qcom,msm8226-vibrator"
- "qcom,msm8974-vibrator"
- - reg: the base address and length of the IO memory for the registers.
- - pinctrl-names: set to default.
- - pinctrl-0: phandles pointing to pin configuration nodes. See
- Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- - clock-names: set to pwm
- - clocks: phandle of the clock. See
- Documentation/devicetree/bindings/clock/clock-bindings.txt
- - enable-gpios: GPIO that enables the vibrator.
-
-Optional properties:
-
- - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example from a LG Nexus 5 (hammerhead) phone:
-
-vibrator@fd8c3450 {
- reg = <0xfd8c3450 0x400>;
- compatible = "qcom,msm8974-vibrator";
-
- vcc-supply = <&pm8941_l19>;
-
- clocks = <&mmcc CAMSS_GP1_CLK>;
- clock-names = "pwm";
-
- enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_pin>;
-};
--
2.24.1
