On Mon, Mar 09, 2020 at 08:38:15AM +0800, Anson Huang wrote: > Add COMPILE_TEST support to i.MX SCU drivers for better compile > testing coverage. > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > --- > No change. > --- > drivers/firmware/imx/Kconfig | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig > index 1d2e5b8..116707a 100644 > --- a/drivers/firmware/imx/Kconfig > +++ b/drivers/firmware/imx/Kconfig > @@ -12,7 +12,7 @@ config IMX_DSP > > config IMX_SCU > bool "IMX SCU Protocol driver" > - depends on IMX_MBOX > + depends on IMX_MBOX || COMPILE_TEST > help > The System Controller Firmware (SCFW) is a low-level system function > which runs on a dedicated Cortex-M core to provide power, clock, and > @@ -24,6 +24,6 @@ config IMX_SCU > > config IMX_SCU_PD > bool "IMX SCU Power Domain driver" > - depends on IMX_SCU > + depends on IMX_SCU || COMPILE_TEST Just reminded by Peng, as we go without adding stubs for !IMX_SCU, any driver depending on IMX_SCU shouldn't have COMPILE_TEST. I fixed it up by dropping COMPILE_TEST from IMX_SCU_PD. Shawn > help > The System Controller Firmware (SCFW) based power domain driver. > -- > 2.7.4 >
