Re: [PATCH v2 1/2] Input: goodix - Add support for more then one touch-key

[Hans de Goede <hdegoede@xxxxxxxxxx>]

Hi,

On 3/12/20 3:50 PM, Dmitry Mastykin wrote:
> Some devices with a goodix touchscreen have more then 1 capacitive
> touch-key. This commit replaces the current support for a single
> touch-key, which ignored the reported key-code. With support for
> up to 7 touch-keys, based upon checking the key-code which is
> post-fixed to any reported touch-data.
>
> KEY_LEFTMETA is assigned to the first touch-key (it will still be
> the default keycode for devices with a single touch-key).
> KEY_F1, KEY_F2... are assigned as default keycode for the other
> touch-keys.
>
> This commit also add supports for keycode remapping, so that
> systemd-udev's hwdb can be used to remap the codes to send
> keycodes to match the icons on the buttons for devices with more
> then 1 touch-key.
>
> Signed-off-by: Dmitry Mastykin <dmastykin@xxxxxxxxxxxxx>

Thank you.

Patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Regards,

Hans



> ---
> Changes in v2:
> - Improve commit message
> ---
>   drivers/input/touchscreen/goodix.c | 54 ++++++++++++++++++++++++------
>   1 file changed, 44 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
> index adb9b92..daf1781 100644
> --- a/drivers/input/touchscreen/goodix.c
> +++ b/drivers/input/touchscreen/goodix.c
> @@ -38,6 +38,7 @@
>   #define GOODIX_CONTACT_SIZE		8
>   #define GOODIX_MAX_CONTACT_SIZE		9
>   #define GOODIX_MAX_CONTACTS		10
> +#define GOODIX_MAX_KEYS			7
>   
>   #define GOODIX_CONFIG_MIN_LENGTH	186
>   #define GOODIX_CONFIG_911_LENGTH	186
> @@ -55,6 +56,7 @@
>   #define GOODIX_REG_ID			0x8140
>   
>   #define GOODIX_BUFFER_STATUS_READY	BIT(7)
> +#define GOODIX_HAVE_KEY			BIT(4)
>   #define GOODIX_BUFFER_STATUS_TIMEOUT	20
>   
>   #define RESOLUTION_LOC		1
> @@ -100,6 +102,7 @@ struct goodix_ts_data {
>   	enum goodix_irq_pin_access_method irq_pin_access_method;
>   	unsigned int contact_size;
>   	u8 config[GOODIX_CONFIG_MAX_LENGTH];
> +	unsigned short keymap[GOODIX_MAX_KEYS];
>   };
>   
>   static int goodix_check_cfg_8(struct goodix_ts_data *ts,
> @@ -285,8 +288,14 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
>   	 */
>   	max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
>   	do {
> +		/*
> +		 * We are going to read ts->contact_size * max(1, touch_num) + 2
> +		 * bytes, where + 2 consists of reading 1 extra byte for the
> +		 * header + 1 extra byte for the footer which contains the
> +		 * touch-key code.
> +		 */
>   		error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR,
> -					data, ts->contact_size + 1);
> +					data, ts->contact_size + 2);
>   		if (error) {
>   			dev_err(&ts->client->dev, "I2C transfer error: %d\n",
>   					error);
> @@ -299,10 +308,10 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
>   				return -EPROTO;
>   
>   			if (touch_num > 1) {
> -				data += 1 + ts->contact_size;
> +				data += 2 + ts->contact_size;
>   				error = goodix_i2c_read(ts->client,
>   						GOODIX_READ_COOR_ADDR +
> -							1 + ts->contact_size,
> +							2 + ts->contact_size,
>   						data,
>   						ts->contact_size *
>   							(touch_num - 1));
> @@ -353,6 +362,23 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data)
>   	input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
>   }
>   
> +static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data)
> +{
> +	int touch_num;
> +	u8 key_value;
> +	int i;
> +
> +	if (data[0] & GOODIX_HAVE_KEY) {
> +		touch_num = data[0] & 0x0f;
> +		key_value = data[1 + ts->contact_size * touch_num];
> +		for (i = 0; i < GOODIX_MAX_KEYS; ++i)
> +			if (key_value & (1 << i))
> +				input_report_key(ts->input_dev, ts->keymap[i], 1);
> +	} else
> +		for (i = 0; i < GOODIX_MAX_KEYS; ++i)
> +			input_report_key(ts->input_dev, ts->keymap[i], 0);
> +}
> +
>   /**
>    * goodix_process_events - Process incoming events
>    *
> @@ -363,7 +389,7 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data)
>    */
>   static void goodix_process_events(struct goodix_ts_data *ts)
>   {
> -	u8  point_data[1 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
> +	u8  point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
>   	int touch_num;
>   	int i;
>   
> @@ -371,11 +397,7 @@ static void goodix_process_events(struct goodix_ts_data *ts)
>   	if (touch_num < 0)
>   		return;
>   
> -	/*
> -	 * Bit 4 of the first byte reports the status of the capacitive
> -	 * Windows/Home button.
> -	 */
> -	input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4));
> +	goodix_ts_report_key(ts, point_data);
>   
>   	for (i = 0; i < touch_num; i++)
>   		if (ts->contact_size == 9)
> @@ -961,6 +983,7 @@ static int goodix_i2c_test(struct i2c_client *client)
>   static int goodix_configure_dev(struct goodix_ts_data *ts)
>   {
>   	int error;
> +	int i;
>   
>   	ts->int_trigger_type = GOODIX_INT_TRIGGER;
>   	ts->max_touch_num = GOODIX_MAX_CONTACTS;
> @@ -978,8 +1001,19 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
>   	ts->input_dev->id.product = ts->id;
>   	ts->input_dev->id.version = ts->version;
>   
> +	ts->input_dev->keycode = ts->keymap;
> +	ts->input_dev->keycodesize = sizeof(ts->keymap[0]);
> +	ts->input_dev->keycodemax = GOODIX_MAX_KEYS;
> +
>   	/* Capacitive Windows/Home button on some devices */
> -	input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA);
> +	for (i = 0; i < GOODIX_MAX_KEYS; ++i) {
> +		if (i == 0)
> +			ts->keymap[i] = KEY_LEFTMETA;
> +		else
> +			ts->keymap[i] = KEY_F1 + (i - 1);
> +
> +		input_set_capability(ts->input_dev, EV_KEY, ts->keymap[i]);
> +	}
>   
>   	input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X);
>   	input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y);