On 02/03/20, Andy Shevchenko wrote: > On Mon, Mar 02, 2020 at 03:30:35PM +0100, Oliver Graute wrote: > > Hello, > > > > I have on of these FT6336G Touch Panels here and I try to get it work > > with the ft6236 driver. It comes up with model identification "0x11". So > > I added that identification to the switch case in > > edt_ft5x06_ts_identify(). But it crashes directly after the probe with a > > corrupted stack. No clue why. Some ideas? > > > * the identification registers. > > + case 0x11: /* EDT EP0110M09 */ > > I have a question, how do you know it's M09 flavour? This was an assumption after reading this thread on removing the old ft6236 driver and looking what the old driver did. There they talk about M09. https://patchwork.kernel.org/patch/9264845/ How can I be sure that that is right? > > > [ 2.232596] i2c i2c-0: LPI2C adapter registered > > [ 2.238931] edt_ft5x06 1-0038: probing for EDT FT5x06 I2C > > [ 2.244369] edt_ft5x06 1-0038: 1-0038 supply vcc not found, using dummy regulator > > > [ 2.257639] edt_ft5x06 1-0038: Model "EP0110M09", Rev. "�", 0x0 sensors > > ...because clearly here something wrong with Revision field. yes, this is suspicious. > > > [ 2.264536] input: EP0110M09 as /devices/platform/bus@5a000000/5a820000.i2c/i2c-1/1-0038/input/input0 > > [ 2.273920] edt_ft5x06 1-0038: EDT FT5x06 initialized: IRQ 35, WAKE pin -1, Reset pin -1. > > [ 2.282124] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: edt_ft5x06_ts_probe+0x9d4/0xa88 > > [ 2.292830] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.6.0-rc1-next-20200214-00051-g9874f196742d #69 > > [ 2.302224] Hardware name: Advantech iMX8QM DMSSE20 (DT) > > [ 2.307544] Workqueue: events deferred_probe_work_func > > [ 2.312686] Call trace: > > [ 2.315141] dump_backtrace+0x0/0x1c0 > > [ 2.318802] show_stack+0x14/0x20 > > [ 2.322124] dump_stack+0xb4/0xfc > > [ 2.325440] panic+0x158/0x320 > > [ 2.328494] print_tainted+0x0/0xa8 > > [ 2.331978] edt_ft5x06_ts_probe+0x9d4/0xa88 The crash is gone after applying Marcos patch from here: https://www.spinics.net/lists/linux-input/msg65908.html Now the driver is loaded, but can't read data with evtest. Best regards, Oliver
