Some Apollo Lake (x86, UEFI + ACPI) devices only list the reset GPIO in their _CRS table and the bit-banging of the IRQ line necessary to wake-up the controller from suspend can be done by calling 2 Goodix custom / specific ACPI methods. This commit adds support for controlling the IRQ line in this matter, allowing us to properly suspend the touchscreen controller on such devices. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Cc: Dmitry Mastykin <mastichi@xxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/input/touchscreen/goodix.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index d178aa33b529..784c4dd8c430 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -35,6 +35,7 @@ enum goodix_irq_pin_access_method { irq_pin_access_none, irq_pin_access_gpio, irq_pin_access_acpi_gpio, + irq_pin_access_acpi_method, }; struct goodix_chip_data { @@ -516,6 +517,9 @@ static int goodix_send_cfg(struct goodix_ts_data *ts, static int goodix_irq_direction_output(struct goodix_ts_data *ts, int value) { + struct device *dev = &ts->client->dev; + acpi_status status; + switch (ts->irq_pin_access_method) { case irq_pin_access_none: dev_err(&ts->client->dev, @@ -530,6 +534,10 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts, * as active-low, use output_raw to avoid the value inversion. */ return gpiod_direction_output_raw(ts->gpiod_int, value); + case irq_pin_access_acpi_method: + status = acpi_execute_simple_method(ACPI_HANDLE(dev), + "INTO", value); + return ACPI_SUCCESS(status) ? 0 : -EIO; } return -EINVAL; /* Never reached */ @@ -537,6 +545,9 @@ static int goodix_irq_direction_output(struct goodix_ts_data *ts, static int goodix_irq_direction_input(struct goodix_ts_data *ts) { + struct device *dev = &ts->client->dev; + acpi_status status; + switch (ts->irq_pin_access_method) { case irq_pin_access_none: dev_err(&ts->client->dev, @@ -546,6 +557,10 @@ static int goodix_irq_direction_input(struct goodix_ts_data *ts) case irq_pin_access_gpio: case irq_pin_access_acpi_gpio: return gpiod_direction_input(ts->gpiod_int); + case irq_pin_access_acpi_method: + status = acpi_evaluate_object(ACPI_HANDLE(dev), "INTI", + NULL, NULL); + return ACPI_SUCCESS(status) ? 0 : -EIO; } return -EINVAL; /* Never reached */ @@ -640,6 +655,11 @@ static const struct acpi_gpio_mapping acpi_goodix_int_last_gpios[] = { { }, }; +static const struct acpi_gpio_mapping acpi_goodix_reset_only_gpios[] = { + { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 }, + { }, +}; + static int goodix_resource(struct acpi_resource *ares, void *data) { struct goodix_ts_data *ts = data; @@ -690,6 +710,12 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) { ts->irq_pin_access_method = irq_pin_access_acpi_gpio; gpio_mapping = acpi_goodix_int_last_gpios; + } else if (ts->gpio_count == 1 && ts->gpio_int_idx == -1 && + acpi_has_method(ACPI_HANDLE(dev), "INTI") && + acpi_has_method(ACPI_HANDLE(dev), "INTO")) { + dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n"); + ts->irq_pin_access_method = irq_pin_access_acpi_method; + gpio_mapping = acpi_goodix_reset_only_gpios; } else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); ts->irq_pin_access_method = irq_pin_access_acpi_gpio; @@ -778,6 +804,10 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) if (!ts->gpiod_int || !ts->gpiod_rst) ts->irq_pin_access_method = irq_pin_access_none; break; + case irq_pin_access_acpi_method: + if (!ts->gpiod_rst) + ts->irq_pin_access_method = irq_pin_access_none; + break; default: if (ts->gpiod_int && ts->gpiod_rst) { ts->reset_controller_at_probe = true; -- 2.25.0