Re: [PATCH] dt-bindings: mfd: Convert ChromeOS EC bindings to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ikjoon,

Thanks for the patch. This is really v2 so should have a [PATCH v2] in the
subject, also try to maintain a changelog after the --- so is more easy for the
reviewer to follow the changes you did.

On 16/1/20 11:13, Ikjoon Jang wrote:
> Convert the ChromeOS EC bindings to json-schema.
> 
> Signed-off-by: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/cros-ec.txt       |  76 ------------
>  .../devicetree/bindings/mfd/cros-ec.yaml      | 111 ++++++++++++++++++

The cros-ec is now a platform/chrome driver and I expect this go through the
platform-chrome tree. Like others platform specific drivers (bindings/goldfish
,bindings/x86, etc) I think it is fine to create a chrome directory. So, should
be fine to put the binding there. In any case mfd is not right place.

Apart from this the patch looks good to me, but I'd like to have a Rob review if
possible. So I'll wait a bit more before pick.

Thanks.
 Enric

>  2 files changed, 111 insertions(+), 76 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mfd/cros-ec.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/cros-ec.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
> deleted file mode 100644
> index 4860eabd0f72..000000000000
> --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
> +++ /dev/null
> @@ -1,76 +0,0 @@
> -ChromeOS Embedded Controller
> -
> -Google's ChromeOS EC is a Cortex-M device which talks to the AP and
> -implements various function such as keyboard and battery charging.
> -
> -The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the
> -compatible string used depends on the interface. Each connection method has
> -its own driver which connects to the top level interface-agnostic EC driver.
> -Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
> -the top-level driver.
> -
> -Required properties (I2C):
> -- compatible: "google,cros-ec-i2c"
> -- reg: I2C slave address
> -
> -Required properties (SPI):
> -- compatible: "google,cros-ec-spi"
> -- reg: SPI chip select
> -
> -Required properties (RPMSG):
> -- compatible: "google,cros-ec-rpmsg"
> -
> -Optional properties (SPI):
> -- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little
> -  time to wake up from sleep before they can receive SPI transfers at a high
> -  clock rate. This property specifies the delay, in usecs, between the
> -  assertion of the CS to the start of the first clock pulse.
> -- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
> -  additional processing time in order to accept new transactions. If the delay
> -  between transactions is not long enough the EC may not be able to respond
> -  properly to subsequent transactions and cause them to hang. This property
> -  specifies the delay, in usecs, introduced between transactions to account
> -  for the time required by the EC to get back into a state in which new data
> -  can be accepted.
> -
> -Required properties (LPC):
> -- compatible: "google,cros-ec-lpc"
> -- reg: List of (IO address, size) pairs defining the interface uses
> -
> -Optional properties (all):
> -- google,has-vbc-nvram: Some implementations of the EC include a small
> -  nvram space used to store verified boot context data. This boolean flag
> -  is used to specify whether this nvram is present or not.
> -
> -Example for I2C:
> -
> -i2c@12ca0000 {
> -	cros-ec@1e {
> -		reg = <0x1e>;
> -		compatible = "google,cros-ec-i2c";
> -		interrupts = <14 0>;
> -		interrupt-parent = <&wakeup_eint>;
> -		wakeup-source;
> -	};
> -
> -
> -Example for SPI:
> -
> -spi@131b0000 {
> -	ec@0 {
> -		compatible = "google,cros-ec-spi";
> -		reg = <0x0>;
> -		interrupts = <14 0>;
> -		interrupt-parent = <&wakeup_eint>;
> -		wakeup-source;
> -		spi-max-frequency = <5000000>;
> -		controller-data {
> -		cs-gpio = <&gpf0 3 4 3 0>;
> -		samsung,spi-cs;
> -		samsung,spi-feedback-delay = <2>;
> -		};
> -	};
> -};
> -
> -
> -Example for LPC is not supplied as it is not yet implemented.
> diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.yaml b/Documentation/devicetree/bindings/mfd/cros-ec.yaml
> new file mode 100644
> index 000000000000..633fa32c5746
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/cros-ec.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/cros-ec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ChromeOS Embedded Controller
> +
> +maintainers:
> +  - Benson Leung <bleung@xxxxxxxxxxxx>
> +  - Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> +  - Guenter Roeck <groeck@xxxxxxxxxxxx>
> +
> +description: |
> +  Google's ChromeOS EC is a microcontroller which talks to the AP and
> +  implements various functions such as keyboard and battery charging.
> +  The EC can be connected through various interfaces (I2C, SPI, and others)
> +  and the compatible string specifies which interface is being used.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - description:
> +          For implementations of the EC is connected through I2C.
> +        const: google,cros-ec-i2c
> +      - description:
> +          For implementations of the EC is connected through SPI.
> +        const: google,cros-ec-spi
> +      - description:
> +          For implementations of the EC is connected through RPMSG.
> +        const: google,cros-ec-rpmsg
> +
> +  google,has-vbc-nvram:
> +    description: |
> +      Some implementations of the EC include a small
> +      nvram space used to store verified boot context data.
> +      This boolean flag is used to specify whether this nvram is
> +      present or not.
> +    type: boolean
> +
> +required:
> +  - compatible
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          const: google,cros-ec-i2c
> +    then:
> +      properties:
> +        reg:
> +          description: I2C slave address
> +          maxItems: 1
> +      required:
> +        - reg
> +  - if:
> +      properties:
> +        compatible:
> +          const: google,cros-ec-spi
> +    then:
> +      properties:
> +        reg:
> +          description: SPI chip select
> +          maxItems: 1
> +        google,cros-ec-spi-pre-delay:
> +          description: |
> +            This property specifies the delay in usecs between the
> +            assertion of the CS and the first clock pulse.
> +        google,cros-ec-spi-msg-delay:
> +          description: |
> +            This property specifies the delay in usecs between messages.
> +      required:
> +        - reg
> +
> +examples:
> +  # Example for I2C
> +  - |
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        cros-ec@1e {
> +            compatible = "google,cros-ec-i2c";
> +            reg = <0x1e>;
> +            interrupts = <6 0>;
> +            interrupt-parent = <&gpx1>;
> +        };
> +    };
> +  # Example for SPI
> +  - |
> +    spi0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        cros-ec@0 {
> +            compatible = "google,cros-ec-spi";
> +            reg = <0x0>;
> +            google,cros-ec-spi-msg-delay = <30>;
> +            interrupts = <99 0>;
> +            interrupt-parent = <&gpio7>;
> +            spi-max-frequency = <5000000>;
> +        };
> +    };
> +  # Example for RPMSG
> +  - |
> +    scp0 {
> +        cros_ec@0 {

nit: s/cros_ec/cros-ec (like the others)

> +            compatible = "google,cros-ec-rpmsg";
> +        };
> +    };
> +...
> 



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux