The touchscreen on the Teclast X89 is mounted upside down in relation to
the display orientation (the touchscreen itself is mounted upright, but the
display is mounted upside-down). Add a quirk for this so that we send
coordinates which match the display orientation.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/input/touchscreen/goodix.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index fb43aa708660..0403102e807e 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -128,6 +128,15 @@ static const unsigned long goodix_irq_flags[] = {
*/
static const struct dmi_system_id rotated_screen[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ .ident = "Teclast X89",
+ .matches = {
+ /* tPAD is too generic, also match on bios date */
+ DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+ DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
+ DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"),
+ },
+ },
{
.ident = "WinBook TW100",
.matches = {
--
2.23.0
