From: Michael Srba <Michael.Srba@xxxxxxxxx> Add support for the bt541 touchscreen IC from zinitix, loosely based on downstream driver. The driver currently supports multitouch (5 touch points). The bt541 seems to support touch keys, but the support was not added because that functionality is not being utilized by the touchscreen used for testing. Based on the similartities between downstream drivers, it seems likely that other similar touchscreen ICs can be supported with this driver in the future. Signed-off-by: Michael Srba <Michael.Srba@xxxxxxxxx> --- bt541 is used in the Samsung Galaxy A3 (2015) that has recently gained mainline support [1]. The downstream driver this is loosely based on: https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/tree/SM-A300FU/drivers/input/touchscreen/zinitix [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1329c1ab0730b521e6cd3051c56a2ff3d55f21e6 drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/zinitix.c | 508 ++++++++++++++++++++++++++++ 3 files changed, 521 insertions(+) create mode 100644 drivers/input/touchscreen/zinitix.c diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 46ad9090493b..6203e0764d5f 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -1314,4 +1314,16 @@ config TOUCHSCREEN_IQS5XX To compile this driver as a module, choose M here: the module will be called iqs5xx. +config TOUCHSCREEN_ZINITIX + tristate "Zinitix touchscreen support" + depends on I2C + help + Say Y here if you have a touchscreen using Zinitix bt541, + or something similar enough. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called zinitix. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 94c6162409b3..bafe9d76ed03 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -110,3 +110,4 @@ obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o +obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c new file mode 100644 index 000000000000..55b1816b39d4 --- /dev/null +++ b/drivers/input/touchscreen/zinitix.c @@ -0,0 +1,508 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <asm/unaligned.h> + +/* Register Map */ + +#define BT541_SWRESET_CMD 0x0000 +#define BT541_WAKEUP_CMD 0x0001 + +#define BT541_IDLE_CMD 0x0004 +#define BT541_SLEEP_CMD 0x0005 + +#define BT541_CLEAR_INT_STATUS_CMD 0x0003 +#define BT541_CALIBRATE_CMD 0x0006 +#define BT541_SAVE_STATUS_CMD 0x0007 +#define BT541_SAVE_CALIBRATION_CMD 0x0008 +#define BT541_RECALL_FACTORY_CMD 0x000f + +#define BT541_THRESHOLD 0x0020 + +#define BT541_LARGE_PALM_REJECT_AREA_TH 0x003F + +#define BT541_DEBUG_REG 0x0115 /* 0~7 */ + +#define BT541_TOUCH_MODE 0x0010 +#define BT541_CHIP_REVISION 0x0011 +#define BT541_FIRMWARE_VERSION 0x0012 + +#define ZINITIX_USB_DETECT 0x116 + +#define BT541_MINOR_FW_VERSION 0x0121 + +#define BT541_VENDOR_ID 0x001C +#define BT541_HW_ID 0x0014 + +#define BT541_DATA_VERSION_REG 0x0013 +#define BT541_SUPPORTED_FINGER_NUM 0x0015 +#define BT541_EEPROM_INFO 0x0018 +#define BT541_INITIAL_TOUCH_MODE 0x0019 + +#define BT541_TOTAL_NUMBER_OF_X 0x0060 +#define BT541_TOTAL_NUMBER_OF_Y 0x0061 + +#define BT541_DELAY_RAW_FOR_HOST 0x007f + +#define BT541_BUTTON_SUPPORTED_NUM 0x00B0 +#define BT541_BUTTON_SENSITIVITY 0x00B2 +#define BT541_DUMMY_BUTTON_SENSITIVITY 0X00C8 + +#define BT541_X_RESOLUTION 0x00C0 +#define BT541_Y_RESOLUTION 0x00C1 + +#define BT541_POINT_STATUS_REG 0x0080 +#define BT541_ICON_STATUS_REG 0x00AA + +#define BT541_POINT_COORD_REG (BT541_POINT_STATUS_REG + 2) + +#define BT541_AFE_FREQUENCY 0x0100 +#define BT541_DND_N_COUNT 0x0122 +#define BT541_DND_U_COUNT 0x0135 + +#define BT541_RAWDATA_REG 0x0200 + +#define BT541_EEPROM_INFO_REG 0x0018 + +#define BT541_INT_ENABLE_FLAG 0x00f0 +#define BT541_PERIODICAL_INTERRUPT_INTERVAL 0x00f1 + +#define BT541_BTN_WIDTH 0x016d + +#define BT541_CHECKSUM_RESULT 0x012c + +#define BT541_INIT_FLASH 0x01d0 +#define BT541_WRITE_FLASH 0x01d1 +#define BT541_READ_FLASH 0x01d2 + +#define ZINITIX_INTERNAL_FLAG_02 0x011e +#define ZINITIX_INTERNAL_FLAG_03 0x011f + +#define ZINITIX_I2C_CHECKSUM_WCNT 0x016a +#define ZINITIX_I2C_CHECKSUM_RESULT 0x016c + +/* Interrupt & status register flags */ + +#define BIT_PT_CNT_CHANGE BIT(0) +#define BIT_DOWN BIT(1) +#define BIT_MOVE BIT(2) +#define BIT_UP BIT(3) +#define BIT_PALM BIT(4) +#define BIT_PALM_REJECT BIT(5) +#define BIT_RESERVED_0 BIT(6) +#define BIT_RESERVED_1 BIT(7) +#define BIT_WEIGHT_CHANGE BIT(8) +#define BIT_PT_NO_CHANGE BIT(9) +#define BIT_REJECT BIT(10) +#define BIT_PT_EXIST BIT(11) +#define BIT_RESERVED_2 BIT(12) +#define BIT_ERROR BIT(13) +#define BIT_DEBUG BIT(14) +#define BIT_ICON_EVENT BIT(15) + +#define SUB_BIT_EXIST BIT(0) +#define SUB_BIT_DOWN BIT(1) +#define SUB_BIT_MOVE BIT(2) +#define SUB_BIT_UP BIT(3) +#define SUB_BIT_UPDATE BIT(4) +#define SUB_BIT_WAIT BIT(5) + +#define TOUCH_POINT_MODE 1 +#define MAX_SUPPORTED_FINGER_NUM 5 + +#define CHIP_ON_DELAY 15 // ms +#define FIRMWARE_ON_DELAY 40 // ms + +#define DELAY_FOR_TRANSACTION 50 // μs +#define DELAY_FOR_POST_TRANSCATION 10 // μs + +struct point_coord { + __le16 x; + __le16 y; + u8 width; + u8 sub_status; + // not used on this model, but needed as padding: + u8 minor_width; + u8 angle; +} __packed; + +struct point_status { + __le16 status; + __le16 event_flag; +} __packed; + +struct bt541_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct touchscreen_properties prop; + struct regulator_bulk_data supplies[2]; +}; + +static inline s32 zinitix_read_data(struct i2c_client *client, + u16 reg, u8 *values, u16 length) +{ + int ret; + __le16 reg_le = cpu_to_le16(reg); + + ret = i2c_master_send(client, (u8 *)®_le, sizeof(reg_le)); + if (ret < 0) + return ret; + + udelay(DELAY_FOR_TRANSACTION); + ret = i2c_master_recv(client, values, length); + if (ret < 0) + return ret; + + udelay(DELAY_FOR_POST_TRANSCATION); + return 0; +} + +static inline s32 zinitix_write_data(struct i2c_client *client, + u16 reg, u8 *values, u16 length) +{ + int ret; + u8 *packet; + __le16 reg_le = cpu_to_le16(reg); + + packet = kmalloc(length + sizeof(reg_le), GFP_KERNEL); + memcpy(packet, (u8 *)®_le, sizeof(reg_le)); + memcpy(packet + sizeof(reg_le), values, length); + + ret = i2c_master_send(client, packet, length + sizeof(reg_le)); + kfree(packet); + if (ret < 0) + return ret; + + udelay(DELAY_FOR_POST_TRANSCATION); + return 0; +} + +static inline s32 zinitix_write_u16(struct i2c_client *client, u16 reg, u16 value) +{ + __le16 value_le = cpu_to_le16(value); + + return zinitix_write_data(client, reg, (u8 *)&value_le, sizeof(reg)); +} + +static inline s32 zinitix_write_cmd(struct i2c_client *client, u16 reg) +{ + int ret; + __le16 reg_le = cpu_to_le16(reg); + + ret = i2c_master_send(client, (u8 *)®_le, sizeof(reg_le)); + if (ret < 0) + return ret; + + udelay(DELAY_FOR_POST_TRANSCATION); + return 0; +} + +static bool zinitix_init_touch(struct bt541_ts_data *bt541) +{ + struct i2c_client *client = bt541->client; + int i; + int ret; + + ret = zinitix_write_cmd(client, BT541_SWRESET_CMD); + if (ret) { + dev_err(&client->dev, "Failed to write reset command\n"); + return ret; + } + + ret = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0); + if (ret) { + dev_err(&client->dev, "failed to reset interrupt enable flag\n"); + return ret; + } + + /* initialize */ + ret = zinitix_write_u16(client, BT541_X_RESOLUTION, (u16)bt541->prop.max_x); + if (ret) + return ret; + + ret = zinitix_write_u16(client, BT541_Y_RESOLUTION, (u16)bt541->prop.max_y); + if (ret) + return ret; + + ret = zinitix_write_u16(client, BT541_SUPPORTED_FINGER_NUM, + (u16)MAX_SUPPORTED_FINGER_NUM); + if (ret) + return ret; + + ret = zinitix_write_u16(client, BT541_INITIAL_TOUCH_MODE, TOUCH_POINT_MODE); + if (ret) + return ret; + + ret = zinitix_write_u16(client, BT541_TOUCH_MODE, TOUCH_POINT_MODE); + if (ret) + return ret; + + ret = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, + BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE | BIT_UP); + if (ret) + return ret; + + /* clear queue */ + for (i = 0; i < 10; i++) { + zinitix_write_cmd(client, BT541_CLEAR_INT_STATUS_CMD); + udelay(10); + } + + return 0; +} + +static int zinitix_init_regulators(struct bt541_ts_data *bt541) +{ + struct i2c_client *client = bt541->client; + int ret; + + bt541->supplies[0].supply = "vdd"; + bt541->supplies[1].supply = "vddo"; + ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(bt541->supplies), + bt541->supplies); + if (ret < 0) { + dev_err(&client->dev, "Failed to get regulators: %d\n", ret); + return ret; + } + + return 0; +} + +static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541) +{ + int ret; + struct i2c_client *client = bt541->client; + + ret = zinitix_write_u16(client, 0xc000, 0x0001); + if (ret) { + dev_err(&client->dev, "Failed to send power sequence(vendor cmd enable)\n"); + return ret; + } + udelay(10); + + ret = zinitix_write_cmd(client, 0xc004); + if (ret) { + dev_err(&client->dev, "Failed to send power sequence(intn clear)\n"); + return ret; + } + udelay(10); + + ret = zinitix_write_u16(client, 0xc002, 0x0001); + if (ret) { + dev_err(&client->dev, "Failed to send power sequence(nvm init)\n"); + return ret; + } + mdelay(2); + + ret = zinitix_write_u16(client, 0xc001, 0x0001); + if (ret) { + dev_err(&client->dev, "Failed to send power sequence(program start)\n"); + return ret; + } + msleep(FIRMWARE_ON_DELAY); /* wait for checksum cal */ + + return 0; +} + +static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) +{ + struct bt541_ts_data *bt541 = (struct bt541_ts_data *)bt541_handler; + struct i2c_client *client = bt541->client; + int i; + int ret; + struct point_status point_status; + struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM] = {0}; + + memset(&point_status, 0, sizeof(struct point_status)); + + ret = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG, + (u8 *)&point_status, sizeof(struct point_status)); + if (ret) { + dev_err(&client->dev, "%s: Failed to read point status\n", __func__); + + zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD); + return IRQ_HANDLED; + } + + for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) { + if (!(le16_to_cpu(point_status.event_flag) & BIT(i))) + continue; + + ret = zinitix_read_data(bt541->client, BT541_POINT_COORD_REG + + (i * sizeof(struct point_coord) / sizeof(u16)), + (u8 *)&point_coord[i], sizeof(struct point_coord)); + if (ret) { + dev_err(&client->dev, "%s: Failed to read point info\n", __func__); + + zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD); + return IRQ_HANDLED; + } + + if (!(point_coord[i].sub_status & SUB_BIT_EXIST)) + continue; + + input_mt_slot(bt541->input_dev, i); + input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true); + touchscreen_report_pos(bt541->input_dev, &bt541->prop, + le16_to_cpu(point_coord[i].x), + le16_to_cpu(point_coord[i].y), true); + input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, point_coord[i].width); + input_report_abs(bt541->input_dev, ABS_MT_WIDTH_MAJOR, point_coord[i].width); + } + + zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD); + + input_mt_sync_frame(bt541->input_dev); + input_sync(bt541->input_dev); + + return IRQ_HANDLED; +} + +static int zinitix_init_input_dev(struct bt541_ts_data *bt541) +{ + int ret; + + bt541->input_dev = devm_input_allocate_device(&bt541->client->dev); + if (!bt541->input_dev) { + dev_err(&bt541->client->dev, "Failed to allocate input device."); + return -ENOMEM; + } + + bt541->input_dev->name = "Zinitix Capacitive TouchScreen"; + bt541->input_dev->phys = "input/ts"; + bt541->input_dev->id.bustype = BUS_I2C; + + input_set_capability(bt541->input_dev, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(bt541->input_dev, EV_ABS, ABS_MT_POSITION_Y); + input_set_abs_params(bt541->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(bt541->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + + touchscreen_parse_properties(bt541->input_dev, true, &bt541->prop); + + if (!bt541->prop.max_x || !bt541->prop.max_y) { + dev_err(&bt541->client->dev, "touchscreen-size-x and/or touchscreen-size-y not set in dts\n"); + return -EINVAL; + } + + ret = input_mt_init_slots(bt541->input_dev, MAX_SUPPORTED_FINGER_NUM, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (ret) { + dev_err(&bt541->client->dev, + "Failed to initialize MT slots: %d", ret); + return ret; + } + + ret = input_register_device(bt541->input_dev); + if (ret) { + dev_err(&bt541->client->dev, + "Failed to register input device: %d", ret); + return ret; + } + + return 0; +} + +static int zinitix_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct bt541_ts_data *bt541; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "I2C check functionality failed.\n"); + return -ENXIO; + } + + bt541 = devm_kzalloc(&client->dev, sizeof(*bt541), GFP_KERNEL); + if (!bt541) + return -ENOMEM; + + bt541->client = client; + i2c_set_clientdata(client, bt541); + + ret = zinitix_init_regulators(bt541); + if (ret) { + dev_err(&client->dev, "regulator initialization failed: %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(bt541->supplies), bt541->supplies); + if (ret < 0) { + dev_err(&client->dev, "Failed to enable regulators: %d\n", ret); + return ret; + } + + msleep(CHIP_ON_DELAY); + + ret = zinitix_send_power_on_sequence(bt541); + if (ret) { + dev_err(&client->dev, "sending power-on sequence failed: %d\n", ret); + return ret; + } + + ret = zinitix_init_input_dev(bt541); + if (ret) { + dev_err(&client->dev, "input dev initialization failed: %d\n", ret); + return ret; + } + + ret = zinitix_init_touch(bt541); + if (ret) { + dev_err(&client->dev, "Failed to init touchscreen ic\n"); + return ret; + } + + ret = devm_request_threaded_irq(&bt541->client->dev, bt541->client->irq, + NULL, zinitix_ts_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + bt541->client->name, bt541); + if (ret) { + dev_err(&client->dev, "request IRQ failed: %d\n", ret); + return ret; + } + + dev_info(&client->dev, "initialized a zinitix touchscreen\n"); + + return 0; +} + +static int zinitix_ts_remove(struct i2c_client *client) +{ + struct bt541_ts_data *bt541 = i2c_get_clientdata(client); + + regulator_bulk_disable(ARRAY_SIZE(bt541->supplies), bt541->supplies); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id zinitix_of_match[] = { + { .compatible = "zinitix,bt541" }, + { } +}; +MODULE_DEVICE_TABLE(of, zinitix_of_match); +#endif + +static struct i2c_driver zinitix_ts_driver = { + .probe = zinitix_ts_probe, + .remove = zinitix_ts_remove, + .driver = { + .name = "Zinitix-TS", + .of_match_table = of_match_ptr(zinitix_of_match), + }, +}; +module_i2c_driver(zinitix_ts_driver); + +MODULE_AUTHOR("Michael Srba <Michael.Srba@xxxxxxxxx>"); +MODULE_DESCRIPTION("Zinitix touchscreen driver"); +MODULE_LICENSE("GPL v2"); -- 2.23.0
