[PATCH 2/5] Input: pixcir_i2c_ts - Move definitions into a single file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All the defined symbols from linux/platform_data/pixcir_i2c_ts.h
are only used by the pixcir_i2c_ts driver, so move all the definitions
locally and get rid of the pixcir_i2c_ts.h file.

Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
---
 drivers/input/touchscreen/pixcir_i2c_ts.c   | 60 ++++++++++++++++++-
 include/linux/platform_data/pixcir_i2c_ts.h | 64 ---------------------
 2 files changed, 59 insertions(+), 65 deletions(-)
 delete mode 100644 include/linux/platform_data/pixcir_i2c_ts.h

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 4561d65e7a1e..efe5f1e86ef1 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -15,11 +15,69 @@
 #include <linux/input/touchscreen.h>
 #include <linux/gpio/consumer.h>
 #include <linux/of_device.h>
-#include <linux/platform_data/pixcir_i2c_ts.h>
 #include <asm/unaligned.h>
 
 #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
 
+/*
+ * Register map
+ */
+#define PIXCIR_REG_POWER_MODE	51
+#define PIXCIR_REG_INT_MODE	52
+
+/*
+ * Power modes:
+ * active: max scan speed
+ * idle: lower scan speed with automatic transition to active on touch
+ * halt: datasheet says sleep but this is more like halt as the chip
+ *       clocks are cut and it can only be brought out of this mode
+ *	 using the RESET pin.
+ */
+enum pixcir_power_mode {
+	PIXCIR_POWER_ACTIVE,
+	PIXCIR_POWER_IDLE,
+	PIXCIR_POWER_HALT,
+};
+
+#define PIXCIR_POWER_MODE_MASK	0x03
+#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
+
+/*
+ * Interrupt modes:
+ * periodical: interrupt is asserted periodicaly
+ * diff coordinates: interrupt is asserted when coordinates change
+ * level on touch: interrupt level asserted during touch
+ * pulse on touch: interrupt pulse asserted during touch
+ *
+ */
+enum pixcir_int_mode {
+	PIXCIR_INT_PERIODICAL,
+	PIXCIR_INT_DIFF_COORD,
+	PIXCIR_INT_LEVEL_TOUCH,
+	PIXCIR_INT_PULSE_TOUCH,
+};
+
+#define PIXCIR_INT_MODE_MASK	0x03
+#define PIXCIR_INT_ENABLE	(1UL << 3)
+#define PIXCIR_INT_POL_HIGH	(1UL << 2)
+
+/**
+ * struct pixcir_irc_chip_data - chip related data
+ * @max_fingers:	Max number of fingers reported simultaneously by h/w
+ * @has_hw_ids:		Hardware supports finger tracking IDs
+ *
+ */
+struct pixcir_i2c_chip_data {
+	u8 max_fingers;
+	bool has_hw_ids;
+};
+
+struct pixcir_ts_platform_data {
+	int x_max;
+	int y_max;
+	struct pixcir_i2c_chip_data chip;
+};
+
 struct pixcir_i2c_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
diff --git a/include/linux/platform_data/pixcir_i2c_ts.h b/include/linux/platform_data/pixcir_i2c_ts.h
deleted file mode 100644
index 4ab3cd6f1cc2..000000000000
--- a/include/linux/platform_data/pixcir_i2c_ts.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef	_PIXCIR_I2C_TS_H
-#define	_PIXCIR_I2C_TS_H
-
-/*
- * Register map
- */
-#define PIXCIR_REG_POWER_MODE	51
-#define PIXCIR_REG_INT_MODE	52
-
-/*
- * Power modes:
- * active: max scan speed
- * idle: lower scan speed with automatic transition to active on touch
- * halt: datasheet says sleep but this is more like halt as the chip
- *       clocks are cut and it can only be brought out of this mode
- *	 using the RESET pin.
- */
-enum pixcir_power_mode {
-	PIXCIR_POWER_ACTIVE,
-	PIXCIR_POWER_IDLE,
-	PIXCIR_POWER_HALT,
-};
-
-#define PIXCIR_POWER_MODE_MASK	0x03
-#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2)
-
-/*
- * Interrupt modes:
- * periodical: interrupt is asserted periodicaly
- * diff coordinates: interrupt is asserted when coordinates change
- * level on touch: interrupt level asserted during touch
- * pulse on touch: interrupt pulse asserted druing touch
- *
- */
-enum pixcir_int_mode {
-	PIXCIR_INT_PERIODICAL,
-	PIXCIR_INT_DIFF_COORD,
-	PIXCIR_INT_LEVEL_TOUCH,
-	PIXCIR_INT_PULSE_TOUCH,
-};
-
-#define PIXCIR_INT_MODE_MASK	0x03
-#define PIXCIR_INT_ENABLE	(1UL << 3)
-#define PIXCIR_INT_POL_HIGH	(1UL << 2)
-
-/**
- * struct pixcir_irc_chip_data - chip related data
- * @max_fingers:	Max number of fingers reported simultaneously by h/w
- * @has_hw_ids:		Hardware supports finger tracking IDs
- *
- */
-struct pixcir_i2c_chip_data {
-	u8 max_fingers;
-	bool has_hw_ids;
-};
-
-struct pixcir_ts_platform_data {
-	int x_max;
-	int y_max;
-	struct pixcir_i2c_chip_data chip;
-};
-
-#endif
-- 
2.17.1




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux