Add scu power key node for i.MX8QXP, disabled by default as it
depends on board design.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
Changes since V1:
- remove "wakeup-source" property, as it is NOT needed for scu mu interrupt;
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 1133b41..85c5534 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/imx8-clock.h>
#include <dt-bindings/firmware/imx/rsrc.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/pads-imx8qxp.h>
@@ -174,6 +175,12 @@
#power-domain-cells = <1>;
};
+ scu_pwrkey: scu-pwrkey {
+ compatible = "fsl,imx8qxp-sc-pwrkey", "fsl,imx-sc-pwrkey";
+ linux,keycode = <KEY_POWER>;
+ status = "disabled";
+ };
+
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
--
2.7.4
