"bu21013_data" and "struct bu21013_ts_data" are a tad long, let's call them
"ts" and "struct bu21013_ts".
Also rename retval to error in bu21013_init_chip() and adjust formatting;
i2c_smbus_write_byte_data() returns negative on error and 0 on success, so
we simply test if whether erro is 0 or not.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
drivers/input/touchscreen/bu21013_ts.c | 376 +++++++++++++------------
1 file changed, 190 insertions(+), 186 deletions(-)
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index c20f86f98ffc..e9cb020ed725 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -135,7 +135,7 @@
#define DRIVER_TP "bu21013_tp"
/**
- * struct bu21013_ts_data - touch panel data structure
+ * struct bu21013_ts - touch panel data structure
* @client: pointer to the i2c client
* @wait: variable to wait_queue_head_t structure
* @touch_stopped: touch stop flag
@@ -147,7 +147,7 @@
*
* Touch panel device data structure
*/
-struct bu21013_ts_data {
+struct bu21013_ts {
struct i2c_client *client;
wait_queue_head_t wait;
const struct bu21013_platform_device *chip;
@@ -161,34 +161,35 @@ struct bu21013_ts_data {
/**
* bu21013_read_block_data(): read the touch co-ordinates
- * @data: bu21013_ts_data structure pointer
+ * @data: bu21013_ts structure pointer
* @buf: byte pointer
*
* Read the touch co-ordinates using i2c read block into buffer
* and returns integer.
*/
-static int bu21013_read_block_data(struct bu21013_ts_data *data, u8 *buf)
+static int bu21013_read_block_data(struct bu21013_ts *ts, u8 *buf)
{
int ret, i;
for (i = 0; i < I2C_RETRY_COUNT; i++) {
- ret = i2c_smbus_read_i2c_block_data
- (data->client, BU21013_SENSORS_BTN_0_7_REG,
- LENGTH_OF_BUFFER, buf);
+ ret = i2c_smbus_read_i2c_block_data(ts->client,
+ BU21013_SENSORS_BTN_0_7_REG,
+ LENGTH_OF_BUFFER, buf);
if (ret == LENGTH_OF_BUFFER)
return 0;
}
+
return -EINVAL;
}
/**
* bu21013_do_touch_report(): Get the touch co-ordinates
- * @data: bu21013_ts_data structure pointer
+ * @data: bu21013_ts structure pointer
*
* Get the touch co-ordinates from touch sensor registers and writes
* into device structure and returns integer.
*/
-static int bu21013_do_touch_report(struct bu21013_ts_data *data)
+static int bu21013_do_touch_report(struct bu21013_ts *ts)
{
u8 buf[LENGTH_OF_BUFFER];
unsigned int pos_x[2], pos_y[2];
@@ -196,10 +197,7 @@ static int bu21013_do_touch_report(struct bu21013_ts_data *data)
int finger_down_count = 0;
int i;
- if (data == NULL)
- return -EINVAL;
-
- if (bu21013_read_block_data(data, buf) < 0)
+ if (bu21013_read_block_data(ts, buf) < 0)
return -EINVAL;
has_x_sensors = hweight32(buf[0] & BU21013_SENSORS_EN_0_7);
@@ -227,21 +225,21 @@ static int bu21013_do_touch_report(struct bu21013_ts_data *data)
}
for (i = 0; i < finger_down_count; i++) {
- if (data->chip->x_flip)
- pos_x[i] = data->chip->touch_x_max - pos_x[i];
- if (data->chip->y_flip)
- pos_y[i] = data->chip->touch_y_max - pos_y[i];
+ if (ts->chip->x_flip)
+ pos_x[i] = ts->chip->touch_x_max - pos_x[i];
+ if (ts->chip->y_flip)
+ pos_y[i] = ts->chip->touch_y_max - pos_y[i];
- input_report_abs(data->in_dev,
+ input_report_abs(ts->in_dev,
ABS_MT_POSITION_X, pos_x[i]);
- input_report_abs(data->in_dev,
+ input_report_abs(ts->in_dev,
ABS_MT_POSITION_Y, pos_y[i]);
- input_mt_sync(data->in_dev);
+ input_mt_sync(ts->in_dev);
}
} else
- input_mt_sync(data->in_dev);
+ input_mt_sync(ts->in_dev);
- input_sync(data->in_dev);
+ input_sync(ts->in_dev);
return 0;
}
@@ -255,23 +253,22 @@ static int bu21013_do_touch_report(struct bu21013_ts_data *data)
*/
static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
{
- struct bu21013_ts_data *data = device_data;
- struct i2c_client *i2c = data->client;
+ struct bu21013_ts *ts = device_data;
int keep_polling;
- int retval;
+ int error;
do {
- retval = bu21013_do_touch_report(data);
- if (retval < 0) {
- dev_err(&i2c->dev, "bu21013_do_touch_report failed\n");
+ error = bu21013_do_touch_report(ts);
+ if (error) {
+ dev_err(&ts->client->dev, "%s failed\n", __func__);
break;
}
- keep_polling = gpiod_get_value(data->int_gpiod);
+ keep_polling = gpiod_get_value(ts->int_gpiod);
if (keep_polling)
- wait_event_timeout(data->wait, data->touch_stopped,
+ wait_event_timeout(ts->wait, ts->touch_stopped,
msecs_to_jiffies(2));
- } while (keep_polling && !data->touch_stopped);
+ } while (keep_polling && !ts->touch_stopped);
return IRQ_HANDLED;
}
@@ -283,130 +280,138 @@ static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
* This function is used to power on
* the bu21013 controller and returns integer.
*/
-static int bu21013_init_chip(struct bu21013_ts_data *data)
+static int bu21013_init_chip(struct bu21013_ts *ts)
{
- int retval;
- struct i2c_client *i2c = data->client;
+ struct i2c_client *client = ts->client;
+ int error;
- retval = i2c_smbus_write_byte_data(i2c, BU21013_RESET_REG,
- BU21013_RESET_ENABLE);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_RESET reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_RESET_REG,
+ BU21013_RESET_ENABLE);
+ if (error) {
+ dev_err(&client->dev, "BU21013_RESET reg write failed\n");
+ return error;
}
msleep(RESET_DELAY);
- retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_0_7_REG,
- BU21013_SENSORS_EN_0_7);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_SENSOR_0_7 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_SENSOR_0_7_REG,
+ BU21013_SENSORS_EN_0_7);
+ if (error) {
+ dev_err(&client->dev, "BU21013_SENSOR_0_7 reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_8_15_REG,
- BU21013_SENSORS_EN_8_15);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_SENSOR_8_15 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_SENSOR_8_15_REG,
+ BU21013_SENSORS_EN_8_15);
+ if (error) {
+ dev_err(&client->dev, "BU21013_SENSOR_8_15 reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_16_23_REG,
- BU21013_SENSORS_EN_16_23);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_SENSOR_16_23 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_SENSOR_16_23_REG,
+ BU21013_SENSORS_EN_16_23);
+ if (error) {
+ dev_err(&client->dev, "BU21013_SENSOR_16_23 reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE1_REG,
- (BU21013_POS_MODE1_0 | BU21013_POS_MODE1_1));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_POS_MODE1 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_POS_MODE1_REG,
+ BU21013_POS_MODE1_0 |
+ BU21013_POS_MODE1_1);
+ if (error) {
+ dev_err(&client->dev, "BU21013_POS_MODE1 reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE2_REG,
- (BU21013_POS_MODE2_ZERO | BU21013_POS_MODE2_AVG1 |
- BU21013_POS_MODE2_AVG2 | BU21013_POS_MODE2_EN_RAW |
- BU21013_POS_MODE2_MULTI));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_POS_MODE2 reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_POS_MODE2_REG,
+ BU21013_POS_MODE2_ZERO |
+ BU21013_POS_MODE2_AVG1 |
+ BU21013_POS_MODE2_AVG2 |
+ BU21013_POS_MODE2_EN_RAW |
+ BU21013_POS_MODE2_MULTI);
+ if (error) {
+ dev_err(&client->dev, "BU21013_POS_MODE2 reg write failed\n");
+ return error;
}
- if (data->chip->ext_clk)
- retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
- (BU21013_CLK_MODE_EXT | BU21013_CLK_MODE_CALIB));
+ if (ts->chip->ext_clk)
+ error = i2c_smbus_write_byte_data(client, BU21013_CLK_MODE_REG,
+ BU21013_CLK_MODE_EXT |
+ BU21013_CLK_MODE_CALIB);
else
- retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
- (BU21013_CLK_MODE_DIV | BU21013_CLK_MODE_CALIB));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_CLK_MODE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_CLK_MODE_REG,
+ BU21013_CLK_MODE_DIV |
+ BU21013_CLK_MODE_CALIB);
+ if (error) {
+ dev_err(&client->dev, "BU21013_CLK_MODE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_IDLE_REG,
- (BU21013_IDLET_0 | BU21013_IDLE_INTERMIT_EN));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_IDLE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_IDLE_REG,
+ BU21013_IDLET_0 |
+ BU21013_IDLE_INTERMIT_EN);
+ if (error) {
+ dev_err(&client->dev, "BU21013_IDLE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_INT_MODE_REG,
- BU21013_INT_MODE_LEVEL);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_INT_MODE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_INT_MODE_REG,
+ BU21013_INT_MODE_LEVEL);
+ if (error) {
+ dev_err(&client->dev, "BU21013_INT_MODE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_FILTER_REG,
- (BU21013_DELTA_0_6 |
- BU21013_FILTER_EN));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_FILTER reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_FILTER_REG,
+ BU21013_DELTA_0_6 |
+ BU21013_FILTER_EN);
+ if (error) {
+ dev_err(&client->dev, "BU21013_FILTER reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_ON_REG,
- BU21013_TH_ON_5);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_TH_ON reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_TH_ON_REG,
+ BU21013_TH_ON_5);
+ if (error) {
+ dev_err(&client->dev, "BU21013_TH_ON reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG,
- BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_TH_OFF_REG,
+ BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
+ if (error) {
+ dev_err(&client->dev, "BU21013_TH_OFF reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_GAIN_REG,
- (BU21013_GAIN_0 | BU21013_GAIN_1));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_GAIN reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_GAIN_REG,
+ BU21013_GAIN_0 | BU21013_GAIN_1);
+ if (error) {
+ dev_err(&client->dev, "BU21013_GAIN reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_OFFSET_MODE_REG,
- BU21013_OFFSET_MODE_DEFAULT);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_OFFSET_MODE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_OFFSET_MODE_REG,
+ BU21013_OFFSET_MODE_DEFAULT);
+ if (error) {
+ dev_err(&client->dev, "BU21013_OFFSET_MODE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_XY_EDGE_REG,
- (BU21013_X_EDGE_0 | BU21013_X_EDGE_2 |
- BU21013_Y_EDGE_1 | BU21013_Y_EDGE_3));
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_XY_EDGE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_XY_EDGE_REG,
+ BU21013_X_EDGE_0 |
+ BU21013_X_EDGE_2 |
+ BU21013_Y_EDGE_1 |
+ BU21013_Y_EDGE_3);
+ if (error) {
+ dev_err(&client->dev, "BU21013_XY_EDGE reg write failed\n");
+ return error;
}
- retval = i2c_smbus_write_byte_data(i2c, BU21013_DONE_REG,
- BU21013_DONE);
- if (retval < 0) {
- dev_err(&i2c->dev, "BU21013_REG_DONE reg write failed\n");
- return retval;
+ error = i2c_smbus_write_byte_data(client, BU21013_DONE_REG,
+ BU21013_DONE);
+ if (error) {
+ dev_err(&client->dev, "BU21013_REG_DONE reg write failed\n");
+ return error;
}
return 0;
@@ -414,16 +419,16 @@ static int bu21013_init_chip(struct bu21013_ts_data *data)
/**
* bu21013_free_irq() - frees IRQ registered for touchscreen
- * @bu21013_data: device structure pointer
+ * @ts: device structure pointer
*
* This function signals interrupt thread to stop processing and
* frees interrupt.
*/
-static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data)
+static void bu21013_free_irq(struct bu21013_ts *ts)
{
- bu21013_data->touch_stopped = true;
- wake_up(&bu21013_data->wait);
- free_irq(bu21013_data->irq, bu21013_data);
+ ts->touch_stopped = true;
+ wake_up(&ts->wait);
+ free_irq(ts->irq, ts);
}
#ifdef CONFIG_OF
@@ -476,12 +481,12 @@ static int bu21013_probe(struct i2c_client *client,
{
const struct bu21013_platform_device *pdata =
dev_get_platdata(&client->dev);
- struct bu21013_ts_data *bu21013_data;
+ struct bu21013_ts *ts;
struct input_dev *in_dev;
int error;
if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_BYTE_DATA)) {
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "i2c smbus byte data not supported\n");
return -EIO;
}
@@ -492,58 +497,57 @@ static int bu21013_probe(struct i2c_client *client,
return PTR_ERR(pdata);
}
- bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL);
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
in_dev = input_allocate_device();
- if (!bu21013_data || !in_dev) {
+ if (!ts || !in_dev) {
dev_err(&client->dev, "device memory alloc failed\n");
error = -ENOMEM;
goto err_free_mem;
}
/* Named "INT" on the chip, DT binding is "touch" */
- bu21013_data->int_gpiod = gpiod_get(&client->dev, "touch", GPIOD_IN);
- error = PTR_ERR_OR_ZERO(bu21013_data->int_gpiod);
+ ts->int_gpiod = gpiod_get(&client->dev, "touch", GPIOD_IN);
+ error = PTR_ERR_OR_ZERO(ts->int_gpiod);
if (error) {
if (error != -EPROBE_DEFER)
dev_err(&client->dev, "failed to get INT GPIO\n");
goto err_free_mem;
}
- gpiod_set_consumer_name(bu21013_data->int_gpiod, "BU21013 INT");
+ gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
- bu21013_data->in_dev = in_dev;
- bu21013_data->chip = pdata;
- bu21013_data->client = client;
- bu21013_data->irq = gpiod_to_irq(bu21013_data->int_gpiod);
+ ts->in_dev = in_dev;
+ ts->chip = pdata;
+ ts->client = client;
+ ts->irq = gpiod_to_irq(ts->int_gpiod);
- bu21013_data->regulator = regulator_get(&client->dev, "avdd");
- if (IS_ERR(bu21013_data->regulator)) {
+ ts->regulator = regulator_get(&client->dev, "avdd");
+ if (IS_ERR(ts->regulator)) {
dev_err(&client->dev, "regulator_get failed\n");
- error = PTR_ERR(bu21013_data->regulator);
+ error = PTR_ERR(ts->regulator);
goto err_put_int_gpio;
}
- error = regulator_enable(bu21013_data->regulator);
+ error = regulator_enable(ts->regulator);
if (error < 0) {
dev_err(&client->dev, "regulator enable failed\n");
goto err_put_regulator;
}
- bu21013_data->touch_stopped = false;
- init_waitqueue_head(&bu21013_data->wait);
+ ts->touch_stopped = false;
+ init_waitqueue_head(&ts->wait);
/* Named "CS" on the chip, DT binding is "reset" */
- bu21013_data->cs_gpiod = gpiod_get(&client->dev, "reset",
- GPIOD_OUT_HIGH);
- error = PTR_ERR_OR_ZERO(bu21013_data->cs_gpiod);
+ ts->cs_gpiod = gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+ error = PTR_ERR_OR_ZERO(ts->cs_gpiod);
if (error) {
if (error != -EPROBE_DEFER)
dev_err(&client->dev, "failed to get CS GPIO\n");
goto err_disable_regulator;
}
- gpiod_set_consumer_name(bu21013_data->cs_gpiod, "BU21013 CS");
+ gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS");
/* configure the touch panel controller */
- error = bu21013_init_chip(bu21013_data);
+ error = bu21013_init_chip(ts);
if (error) {
dev_err(&client->dev, "error in bu21013 config\n");
goto err_cs_disable;
@@ -558,19 +562,19 @@ static int bu21013_probe(struct i2c_client *client,
__set_bit(EV_KEY, in_dev->evbit);
__set_bit(EV_ABS, in_dev->evbit);
- input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0,
- pdata->touch_x_max, 0, 0);
- input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0,
- pdata->touch_y_max, 0, 0);
- input_set_drvdata(in_dev, bu21013_data);
+ input_set_abs_params(in_dev, ABS_MT_POSITION_X,
+ 0, pdata->touch_x_max, 0, 0);
+ input_set_abs_params(in_dev, ABS_MT_POSITION_Y,
+ 0, pdata->touch_y_max, 0, 0);
+ input_set_drvdata(in_dev, ts);
- error = request_threaded_irq(bu21013_data->irq, NULL, bu21013_gpio_irq,
+ error = request_threaded_irq(ts->irq, NULL, bu21013_gpio_irq,
IRQF_TRIGGER_FALLING | IRQF_SHARED |
IRQF_ONESHOT,
- DRIVER_TP, bu21013_data);
+ DRIVER_TP, ts);
if (error) {
dev_err(&client->dev, "request irq %d failed\n",
- bu21013_data->irq);
+ ts->irq);
goto err_cs_disable;
}
@@ -581,24 +585,24 @@ static int bu21013_probe(struct i2c_client *client,
}
device_init_wakeup(&client->dev, pdata->wakeup);
- i2c_set_clientdata(client, bu21013_data);
+ i2c_set_clientdata(client, ts);
return 0;
err_free_irq:
- bu21013_free_irq(bu21013_data);
+ bu21013_free_irq(ts);
err_cs_disable:
- gpiod_set_value(bu21013_data->cs_gpiod, 0);
- gpiod_put(bu21013_data->cs_gpiod);
+ gpiod_set_value(ts->cs_gpiod, 0);
+ gpiod_put(ts->cs_gpiod);
err_disable_regulator:
- regulator_disable(bu21013_data->regulator);
+ regulator_disable(ts->regulator);
err_put_regulator:
- regulator_put(bu21013_data->regulator);
+ regulator_put(ts->regulator);
err_put_int_gpio:
- gpiod_put(bu21013_data->int_gpiod);
+ gpiod_put(ts->int_gpiod);
err_free_mem:
input_free_device(in_dev);
- kfree(bu21013_data);
+ kfree(ts);
return error;
}
@@ -611,21 +615,21 @@ static int bu21013_probe(struct i2c_client *client,
*/
static int bu21013_remove(struct i2c_client *client)
{
- struct bu21013_ts_data *bu21013_data = i2c_get_clientdata(client);
+ struct bu21013_ts *ts = i2c_get_clientdata(client);
- bu21013_free_irq(bu21013_data);
+ bu21013_free_irq(ts);
- gpiod_set_value(bu21013_data->cs_gpiod, 0);
- gpiod_put(bu21013_data->cs_gpiod);
+ gpiod_set_value(ts->cs_gpiod, 0);
+ gpiod_put(ts->cs_gpiod);
- input_unregister_device(bu21013_data->in_dev);
+ input_unregister_device(ts->in_dev);
- regulator_disable(bu21013_data->regulator);
- regulator_put(bu21013_data->regulator);
+ regulator_disable(ts->regulator);
+ regulator_put(ts->regulator);
- gpiod_put(bu21013_data->int_gpiod);
+ gpiod_put(ts->int_gpiod);
- kfree(bu21013_data);
+ kfree(ts);
return 0;
}
@@ -640,16 +644,16 @@ static int bu21013_remove(struct i2c_client *client)
*/
static int bu21013_suspend(struct device *dev)
{
- struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
- struct i2c_client *client = bu21013_data->client;
+ struct bu21013_ts *ts = dev_get_drvdata(dev);
+ struct i2c_client *client = ts->client;
- bu21013_data->touch_stopped = true;
+ ts->touch_stopped = true;
if (device_may_wakeup(&client->dev))
- enable_irq_wake(bu21013_data->irq);
+ enable_irq_wake(ts->irq);
else
- disable_irq(bu21013_data->irq);
+ disable_irq(ts->irq);
- regulator_disable(bu21013_data->regulator);
+ regulator_disable(ts->regulator);
return 0;
}
@@ -663,28 +667,28 @@ static int bu21013_suspend(struct device *dev)
*/
static int bu21013_resume(struct device *dev)
{
- struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
- struct i2c_client *client = bu21013_data->client;
+ struct bu21013_ts *ts = dev_get_drvdata(dev);
+ struct i2c_client *client = ts->client;
int retval;
- retval = regulator_enable(bu21013_data->regulator);
+ retval = regulator_enable(ts->regulator);
if (retval < 0) {
dev_err(&client->dev, "bu21013 regulator enable failed\n");
return retval;
}
- retval = bu21013_init_chip(bu21013_data);
+ retval = bu21013_init_chip(ts);
if (retval < 0) {
dev_err(&client->dev, "bu21013 controller config failed\n");
return retval;
}
- bu21013_data->touch_stopped = false;
+ ts->touch_stopped = false;
if (device_may_wakeup(&client->dev))
- disable_irq_wake(bu21013_data->irq);
+ disable_irq_wake(ts->irq);
else
- enable_irq(bu21013_data->irq);
+ enable_irq(ts->irq);
return 0;
}
--
2.23.0.rc1.153.gdeed80330f-goog
