Hi, Tim. Thanks for your report. With "psmouse.synaptics_intertouch=1", do suspend and hibernation (aka s2ram and s2disk) work without problem? (This is a must check.) If it is possible for you to apply a patch to the source and compile the kernel, I'll prepare a patch and send it. > I have not received any response on below message. Sorry to hear that. I'm not a kernel developer, but have been working on this issue to help them. Unless someone volunteers, a change won't happen, unfortunately. (In fact, I was aware of your first message, but I've been busy. ;-) Regards, Teika From: Tim Mohlmann <tim@xxxxxxxxxx> Subject: Synaptics i2c and rmi: dmesg requested to send report Date: Mon, 27 May 2019 14:08:13 +0300 > Good day, > > I'm sending this report as suggested by dmesg message: > > psmouse serio2: synaptics: Your touchpad (PNP: SYN1218 PNP0f13) says it > can support a different bus. If i2c-hid and hid-rmi are not used, you > might want to try setting psmouse.synaptics_intertouch to 1 and report > this to linux-input@xxxxxxxxxxxxxxx. > > Checked in /proc/bus/input/devices: > > I: Bus=0011 Vendor=0002 Product=0007 Version=01b1 > N: Name="SynPS/2 Synaptics TouchPad" > P: Phys=isa0060/serio2/input0 > S: Sysfs=/devices/platform/i8042/serio2/input/input10 > U: Uniq= > H: Handlers=event5 > B: PROP=1 > B: EV=b > B: KEY=e520 30000 0 0 0 0 > B: ABS=660800011000003 > > So I've set psmouse.synaptics_intertouch=1 on kernel command line and > after reboot: > > I: Bus=001d Vendor=06cb Product=0000 Version=0000 > N: Name="Synaptics TM3189-001" > P: Phys=rmi4-00/input0 > S: Sysfs=/devices/rmi4-00/input/input11 > U: Uniq= > H: Handlers=event5 > B: PROP=1 > B: EV=b > B: KEY=e520 30000 0 0 0 0 > B: ABS=6f3800001000003 > > Its worth to mention that the touchpad worked using PS/2, but was a bit > choppy in its response. It works way better after setting > psmouse.synaptics_intertouch=1. > > I don't now the make of the touchpad, as it does not show up in lspci. > It's part of a custom built laptop, based on a Clevo N350DW model. > Hopefully the above vendor ID is all you need. > > |$ uname -r 5.1.4-gentoo $ grep -E 'INPUT|I2C_HID|HID_RMI' .config > CONFIG_RFKILL_INPUT=y CONFIG_INPUT=y CONFIG_INPUT_LEDS=m > CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y > CONFIG_INPUT_SPARSEKMAP=m # CONFIG_INPUT_MATRIXKMAP is not set # > CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set > CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set > CONFIG_INPUT_KEYBOARD=y CONFIG_INPUT_MOUSE=y CONFIG_INPUT_JOYSTICK=y > CONFIG_INPUT_TABLET=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y # > CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_BMA150 is not set # > CONFIG_INPUT_E3X0_BUTTON is not set # CONFIG_INPUT_MSM_VIBRATOR is not > set # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_MMA8450 is not set # > CONFIG_INPUT_APANEL is not set # CONFIG_INPUT_ATLAS_BTNS is not set # > CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not > set # CONFIG_INPUT_KXTJ9 is not set # CONFIG_INPUT_POWERMATE is not set > # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # > CONFIG_INPUT_UINPUT is not set # CONFIG_INPUT_PCF8574 is not set # > CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_IMS_PCU is not set # > CONFIG_INPUT_CMA3000 is not set # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not > set # CONFIG_INPUT_DRV2665_HAPTICS is not set # > CONFIG_INPUT_DRV2667_HAPTICS is not set > CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_PWC_INPUT_EVDEV=y > CONFIG_SND_JACK_INPUT_DEV=y # CONFIG_SND_HDA_INPUT_BEEP is not set > CONFIG_HID_RMI=y CONFIG_I2C_HID=y| > > Let me know if there is anything else you need from me. > > Br, Tim Mohlmann
