On 4/22/19 4:08 PM, Bjorn Helgaas wrote:
https://bugzilla.kernel.org/show_bug.cgi?id=203297
Regression, suspected but as yet unconfirmed cause:
c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions")
backported to 4.20 stable as 39e1be324c2f.
With help of Keijo it was confirmed above patch broke the Synaptics
touchpad. Not bisected but touchpad works again by forcing the i2c-i801
SMBus controller always on:
"echo on >/sys/bus/pci/devices/0000\:00\:1f.3/power/control"
Above patch is a generalized fix that fixed the runtime PM regression on
i2c-i801 and re-allow the controller go to runtime suspend when idle. So
most probably Synaptics touchpad was broken by i2c-i801 runtime PM also
before but got unnoticed. Which is easy since on many platforms SMBus
controller doesn't necessarily have the PCI PM capabilities.
I would like to ask help from input subsystem experts what kind of SMBus
power state dependency Synaptics RMI4 SMBus devices have since it cease
to work if SMBus controllers idles between transfers and how this is
best to fix?
Instead of revert I think we'd need to have some method to force SMBus
controller on whenever the touchpad is active, like when there is a
userspace listening.
I'm not expert in this area so as quick proof of concept I had a
following hack which forces the I2C/SMBus adapter, and eventually the
parent PCI device of it on when the RMI4 SMBus device is probed and let
the SMBus controller to idle when removed.
According to Keijo it fixes the issue but I like to hear input experts
for better place to put these.
diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c
index b6ccf39c6a7b..2b11d69be313 100644
--- a/drivers/input/rmi4/rmi_smbus.c
+++ b/drivers/input/rmi4/rmi_smbus.c
@@ -16,6 +16,7 @@
#include <linux/lockdep.h>
#include <linux/module.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/rmi.h>
#include <linux/slab.h>
#include "rmi_driver.h"
@@ -332,6 +333,9 @@ static int rmi_smb_probe(struct i2c_client *client,
dev_info(&client->dev, "registering SMbus-connected sensor\n");
+ /* Force SMBus adapter on while RMI4 device is connected */
+ pm_runtime_get(&client->adapter->dev);
+
error = rmi_register_transport_device(&rmi_smb->xport);
if (error) {
dev_err(&client->dev, "failed to register sensor: %d\n", error);
@@ -346,6 +350,7 @@ static int rmi_smb_remove(struct i2c_client *client)
struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
rmi_unregister_transport_device(&rmi_smb->xport);
+ pm_runtime_put(&client->adapter->dev);
return 0;
}
--
Jarkko
