Provide a simple driver for GPIO controllable vibrators.
It will be used by the Fairphone 2.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
.../bindings/input/gpio-vibrator.txt | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/gpio-vibrator.txt
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.txt b/Documentation/devicetree/bindings/input/gpio-vibrator.txt
new file mode 100644
index 000000000000..93e5a8e7622d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.txt
@@ -0,0 +1,20 @@
+* GPIO vibrator device tree bindings
+
+Registers a GPIO device as vibrator, where the vibration motor just has the
+capability to turn on or off. If the device is connected to a pwm, you should
+use the pwm-vibrator driver instead.
+
+Required properties:
+- compatible: should contain "gpio-vibrator"
+- enable-gpios: Should contain a GPIO handle
+
+Optional properties:
+- vcc-supply: Phandle for the regulator supplying power
+
+Example from Fairphone 2:
+
+vibrator {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&pm8941_l18>;
+};
--
2.21.0
