SGI IOC3 ASIC includes support for ethernet, PS2 keyboard/mouse, NIC (number in a can), GPIO and a byte bus. By attaching a SuperIO chip to it, it also supports serial lines and a parallel port. The chip is used on a variety of SGI systems with different configurations. This patchset moves code out of the network driver, which doesn't belong there, into its new place a MFD driver and specific platform drivers for the different subfunctions. Thomas Bogendoerfer (6): MIPS: SGI-IP27: remove ioc3 ethernet init MIPS: SGI-IP27: remove setup of RTC platform device mfd: ioc3: Add driver for SGI IOC3 chip MIPS: SGI-IP27: fix readb/writeb addressing tty: serial: Add 8250-core base IOC3 driver Input: add IOC3 serio driver arch/mips/include/asm/mach-ip27/mangle-port.h | 2 +- arch/mips/include/asm/sn/ioc3.h | 350 ++--- arch/mips/sgi-ip27/ip27-console.c | 5 +- arch/mips/sgi-ip27/ip27-init.c | 13 - arch/mips/sgi-ip27/ip27-timer.c | 20 - drivers/input/serio/Kconfig | 12 + drivers/input/serio/Makefile | 1 + drivers/input/serio/ioc3kbd.c | 183 +++ drivers/mfd/Kconfig | 13 + drivers/mfd/Makefile | 1 + drivers/mfd/ioc3.c | 802 +++++++++++ drivers/net/ethernet/sgi/Kconfig | 4 +- drivers/net/ethernet/sgi/ioc3-eth.c | 1869 +++++++++---------------- drivers/rtc/rtc-m48t35.c | 11 + drivers/tty/serial/8250/8250_ioc3.c | 98 ++ drivers/tty/serial/8250/Kconfig | 11 + drivers/tty/serial/8250/Makefile | 1 + include/linux/platform_data/ioc3eth.h | 15 + 18 files changed, 1974 insertions(+), 1437 deletions(-) create mode 100644 drivers/input/serio/ioc3kbd.c create mode 100644 drivers/mfd/ioc3.c create mode 100644 drivers/tty/serial/8250/8250_ioc3.c create mode 100644 include/linux/platform_data/ioc3eth.h -- 2.13.7
