On Sat, 2019-03-30 at 16:53 +0530, Rushikesh S Kadam wrote: > This driver adds support for loading Intel Integrated > Sensor Hub (ISH) firmware from host file system to ISH > SRAM and start execution. > > At power-on, the ISH subsystem shall boot to an interim > Shim loader-firmware, which shall expose an ISHTP loader > device. > > The driver implements an ISHTP client that communicates > with the Shim ISHTP loader device over the intel-ish-hid > stack, to download the main ISH firmware. > > Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@xxxxxxxxx> Rushikesh, You have one reviewed by and one Tested-by from Chrome developers. Please add those. Also you can also add Acked-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx> > --- > The patches are baselined to hid git tree, branch for-5.2/ish > https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git/log/?h=for-5.2/ish > > v4 > - Changed process_recv() to wake the caller in case of > error as well. Earlier caller would wait until timeout on > an error. > - Change sequence of few checks in process_recv(). > > v3 > - Moved a couple of sanity checks from loader_cl_send() to > process_recv(). > - Several minor changes to address review comments. > > v2 > - Change loader_cl_send() so that the calling function > shall allocate and pass the buffer to be used for > receiving firwmare response data. Corresponding changes > in calling function and process_recv(). > - Introduced struct response_info to encapsulate and pass > data between from the process_recv() callback to > calling function loader_cl_send(). > - Keep count of host firmware load retries, and fail after > 3 unsuccessful attempts. > - Dropped report_bad_packets() function previously used for > keeping count of bad packets. > - Inlined loader_ish_hw_reset()'s functionality > > v1 > - Initial version. > > drivers/hid/Makefile | 1 + > drivers/hid/intel-ish-hid/Kconfig | 15 + > drivers/hid/intel-ish-hid/Makefile | 3 + > drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 1085 > +++++++++++++++++++++++++++ > 4 files changed, 1104 insertions(+) > create mode 100644 drivers/hid/intel-ish-hid/ishtp-fw-loader.c > > diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile > index 170163b..d8d393e 100644 > --- a/drivers/hid/Makefile > +++ b/drivers/hid/Makefile > @@ -134,3 +134,4 @@ obj-$(CONFIG_USB_KBD) += usbhid/ > obj-$(CONFIG_I2C_HID) += i2c-hid/ > > obj-$(CONFIG_INTEL_ISH_HID) += intel-ish-hid/ > +obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/ > diff --git a/drivers/hid/intel-ish-hid/Kconfig b/drivers/hid/intel- > ish-hid/Kconfig > index 519e4c8..786adbc 100644 > --- a/drivers/hid/intel-ish-hid/Kconfig > +++ b/drivers/hid/intel-ish-hid/Kconfig > @@ -14,4 +14,19 @@ config INTEL_ISH_HID > Broxton and Kaby Lake. > > Say Y here if you want to support Intel ISH. If unsure, say > N. > + > +config INTEL_ISH_FIRMWARE_DOWNLOADER > + tristate "Host Firmware Load feature for Intel ISH" > + depends on INTEL_ISH_HID > + depends on X86 > + help > + The Integrated Sensor Hub (ISH) enables the kernel to offload > + sensor polling and algorithm processing to a dedicated low > power > + processor in the chipset. > + > + The Host Firmware Load feature adds support to load the ISH > + firmware from host file system at boot. > + > + Say M here if you want to support Host Firmware Loading > feature > + for Intel ISH. If unsure, say N. > endmenu > diff --git a/drivers/hid/intel-ish-hid/Makefile b/drivers/hid/intel- > ish-hid/Makefile > index 825b70a..2de97e4 100644 > --- a/drivers/hid/intel-ish-hid/Makefile > +++ b/drivers/hid/intel-ish-hid/Makefile > @@ -20,4 +20,7 @@ obj-$(CONFIG_INTEL_ISH_HID) += intel-ishtp-hid.o > intel-ishtp-hid-objs := ishtp-hid.o > intel-ishtp-hid-objs += ishtp-hid-client.o > > +obj-$(CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ishtp-loader.o > +intel-ishtp-loader-objs += ishtp-fw-loader.o > + > ccflags-y += -Idrivers/hid/intel-ish-hid/ishtp > diff --git a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c > b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c > new file mode 100644 > index 0000000..e770e22 > --- /dev/null > +++ b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c > @@ -0,0 +1,1085 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * ISH-TP client driver for ISH firmware loading > + * > + * Copyright (c) 2019, Intel Corporation. > + */ > + > +#include <linux/firmware.h> > +#include <linux/module.h> > +#include <linux/pci.h> > +#include <linux/intel-ish-client-if.h> > +#include <linux/property.h> > +#include <asm/cacheflush.h> > + > +/* Number of times we attempt to load the firmware before giving up > */ > +#define MAX_LOAD_ATTEMPTS 3 > + > +/* ISH TX/RX ring buffer pool size */ > +#define LOADER_CL_RX_RING_SIZE 1 > +#define LOADER_CL_TX_RING_SIZE 1 > + > +/* > + * ISH Shim firmware loader reserves 4 Kb buffer in SRAM. The buffer > is > + * used to temporarily hold the data transferred from host to Shim > + * firmware loader. Reason for the odd size of 3968 bytes? Each IPC > + * transfer is 128 bytes (= 4 bytes header + 124 bytes payload). So > the > + * 4 Kb buffer can hold maximum of 32 IPC transfers, which means we > can > + * have a max payload of 3968 bytes (= 32 x 124 payload). > + */ > +#define LOADER_SHIM_IPC_BUF_SIZE 3968 > + > +/** > + * enum ish_loader_commands - ISH loader host commands. > + * LOADER_CMD_XFER_QUERY Query the Shim firmware loader for > + * capabilities > + * LOADER_CMD_XFER_FRAGMENT Transfer one firmware image fragment at > a > + * time. The command may be executed > + * multiple times until the entire > firmware > + * image is downloaded to SRAM. > + * LOADER_CMD_START Start executing the main firmware. > + */ > +enum ish_loader_commands { > + LOADER_CMD_XFER_QUERY = 0, > + LOADER_CMD_XFER_FRAGMENT, > + LOADER_CMD_START, > +}; > + > +/* Command bit mask */ > +#define CMD_MASK GENMASK(6, 0) > +#define IS_RESPONSE BIT(7) > + > +/* > + * ISH firmware max delay for one transmit failure is 1 Hz, > + * and firmware will retry 2 times, so 3 Hz is used for timeout. > + */ > +#define ISHTP_SEND_TIMEOUT (3 * HZ) > + > +/* > + * Loader transfer modes: > + * > + * LOADER_XFER_MODE_ISHTP mode uses the existing ISH-TP mechanism to > + * transfer data. This may use IPC or DMA if supported in firmware. > + * The buffer size is limited to 4 Kb by the IPC/ISH-TP protocol for > + * both IPC & DMA (legacy). > + * > + * LOADER_XFER_MODE_DIRECT_DMA - firmware loading is a bit different > + * from the sensor data streaming. Here we download a large (300+ > Kb) > + * image directly to ISH SRAM memory. There is limited benefit of > + * DMA'ing 300 Kb image in 4 Kb chucks limit. Hence, we introduce > + * this "direct dma" mode, where we do not use ISH-TP for DMA, but > + * instead manage the DMA directly in kernel driver and Shim > firmware > + * loader (allocate buffer, break in chucks and transfer). This > allows > + * to overcome 4 Kb limit, and optimize the data flow path in > firmware. > + */ > +#define LOADER_XFER_MODE_DIRECT_DMA BIT(0) > +#define LOADER_XFER_MODE_ISHTP BIT(1) > + > +/* ISH Transport Loader client unique GUID */ > +static const guid_t loader_ishtp_guid = > + GUID_INIT(0xc804d06a, 0x55bd, 0x4ea7, > + 0xad, 0xed, 0x1e, 0x31, 0x22, 0x8c, 0x76, 0xdc); > + > +#define FILENAME_SIZE 256 > + > +/* > + * The firmware loading latency will be minimum if we can DMA the > + * entire ISH firmware image in one go. This requires that we > allocate > + * a large DMA buffer in kernel, which could be problematic on some > + * platforms. So here we limit the DMA buffer size via a > module_param. > + * We default to 4 pages, but a customer can set it to higher limit > if > + * deemed appropriate for his platform. > + */ > +static int dma_buf_size_limit = 4 * PAGE_SIZE; > + > +/** > + * struct loader_msg_hdr - Header for ISH Loader commands. > + * @command: LOADER_CMD* commands. Bit 7 is the response. > + * @status: Command response status. Non 0, is error > + * condition. > + * > + * This structure is used as header for every command/data > sent/received > + * between Host driver and ISH Shim firmware loader. > + */ > +struct loader_msg_hdr { > + u8 command; > + u8 reserved[2]; > + u8 status; > +} __packed; > + > +struct loader_xfer_query { > + struct loader_msg_hdr hdr; > + u32 image_size; > +} __packed; > + > +struct ish_fw_version { > + u16 major; > + u16 minor; > + u16 hotfix; > + u16 build; > +} __packed; > + > +union loader_version { > + u32 value; > + struct { > + u8 major; > + u8 minor; > + u8 hotfix; > + u8 build; > + }; > +} __packed; > + > +struct loader_capability { > + u32 max_fw_image_size; > + u32 xfer_mode; > + u32 max_dma_buf_size; /* only for dma mode, multiples of > cacheline */ > +} __packed; > + > +struct shim_fw_info { > + struct ish_fw_version ish_fw_version; > + u32 protocol_version; > + union loader_version ldr_version; > + struct loader_capability ldr_capability; > +} __packed; > + > +struct loader_xfer_query_response { > + struct loader_msg_hdr hdr; > + struct shim_fw_info fw_info; > +} __packed; > + > +struct loader_xfer_fragment { > + struct loader_msg_hdr hdr; > + u32 xfer_mode; > + u32 offset; > + u32 size; > + u32 is_last; > +} __packed; > + > +struct loader_xfer_ipc_fragment { > + struct loader_xfer_fragment fragment; > + u8 data[] ____cacheline_aligned; /* variable length payload > here */ > +} __packed; > + > +struct loader_xfer_dma_fragment { > + struct loader_xfer_fragment fragment; > + u64 ddr_phys_addr; > +} __packed; > + > +struct loader_start { > + struct loader_msg_hdr hdr; > +} __packed; > + > +/** > + * struct response_info - Encapsulate firmware response related > + * information for passing between function > + * loader_cl_send() and process_recv() callback. > + * @data Copy the data received from firmware here. > + * @max_size Max size allocated for the @data buffer. If the > + * received data exceeds this value, we log an > + * error. > + * @size Actual size of data received from firmware. > + * @error Returns 0 for success, negative error code for > a > + * failure in function process_recv(). > + * @received Set to true on receiving a valid firmware > + * response to host command > + * @wait_queue Wait queue for Host firmware loading > where the > + * client sends message to ISH firmware and waits > + * for response > + */ > +struct response_info { > + void *data; > + size_t max_size; > + size_t size; > + int error; > + bool received; > + wait_queue_head_t wait_queue; > +}; > + > +/** > + * struct ishtp_cl_data - Encapsulate per ISH-TP Client Data. > + * @work_ishtp_reset: Work queue for reset handling. > + * @work_fw_load: Work queue for host firmware loading. > + * @flag_retry Flag for indicating host firmware > loading should > + * be retried. > + * @retry_count Count the number of retries. > + * > + * This structure is used to store data per client. > + */ > +struct ishtp_cl_data { > + struct ishtp_cl *loader_ishtp_cl; > + struct ishtp_cl_device *cl_device; > + > + /* > + * Used for passing firmware response information between > + * loader_cl_send() and process_recv() callback. > + */ > + struct response_info response; > + > + struct work_struct work_ishtp_reset; > + struct work_struct work_fw_load; > + > + /* > + * In certain failure scenrios, it makes sense to reset the ISH > + * subsystem and retry Host firmware loading (e.g. bad message > + * packet, ENOMEM, etc.). On the other hand, failures due to > + * protocol mismatch, etc., are not recoverable. We do not > + * retry them. > + * > + * If set, the flag indicates that we should re-try the > + * particular failure. > + */ > + bool flag_retry; > + int retry_count; > +}; > + > +#define IPC_FRAGMENT_DATA_PREAMBLE \ > + offsetof(struct loader_xfer_ipc_fragment, data) > + > +#define cl_data_to_dev(client_data) ishtp_device((client_data)- > >cl_device) > + > +/** > + * get_firmware_variant() - Gets the filename of firmware image to > be > + * loaded based on platform variant. > + * @client_data Client data instance. > + * @filename Returns firmware filename. > + * > + * Queries the firmware-name device property string. > + * > + * Return: 0 for success, negative error code for failure. > + */ > +static int get_firmware_variant(struct ishtp_cl_data *client_data, > + char *filename) > +{ > + int rv; > + const char *val; > + struct device *devc = ishtp_get_pci_device(client_data- > >cl_device); > + > + rv = device_property_read_string(devc, "firmware-name", &val); > + if (rv < 0) { > + dev_err(devc, > + "Error: ISH firmware-name device property > required\n"); > + return rv; > + } > + return snprintf(filename, FILENAME_SIZE, "intel/%s", val); > +} > + > +/** > + * loader_cl_send() Send message from host to firmware > + * @client_data: Client data instance > + * @out_msg Message buffer to be sent to firmware > + * @out_size Size of out going message > + * @in_msg Message buffer where the incoming data copied. > + * This buffer is allocated by calling > + * @in_size Max size of incoming message > + * > + * Return: Number of bytes copied in the in_msg on success, negative > + * error code on failure. > + */ > +static int loader_cl_send(struct ishtp_cl_data *client_data, > + u8 *out_msg, size_t out_size, > + u8 *in_msg, size_t in_size) > +{ > + int rv; > + struct loader_msg_hdr *out_hdr = (struct loader_msg_hdr > *)out_msg; > + struct ishtp_cl *loader_ishtp_cl = client_data- > >loader_ishtp_cl; > + > + dev_dbg(cl_data_to_dev(client_data), > + "%s: command=%02lx is_response=%u status=%02x\n", > + __func__, > + out_hdr->command & CMD_MASK, > + out_hdr->command & IS_RESPONSE ? 1 : 0, > + out_hdr->status); > + > + /* Setup in coming buffer & size */ > + client_data->response.data = in_msg; > + client_data->response.max_size = in_size; > + client_data->response.error = 0; > + client_data->response.received = false; > + > + rv = ishtp_cl_send(loader_ishtp_cl, out_msg, out_size); > + if (rv < 0) { > + dev_err(cl_data_to_dev(client_data), > + "ishtp_cl_send error %d\n", rv); > + return rv; > + } > + > + wait_event_interruptible_timeout(client_data- > >response.wait_queue, > + client_data- > >response.received, > + ISHTP_SEND_TIMEOUT); > + if (!client_data->response.received) { > + dev_err(cl_data_to_dev(client_data), > + "Timed out for response to command=%02lx", > + out_hdr->command & CMD_MASK); > + return -ETIMEDOUT; > + } > + > + if (client_data->response.error < 0) > + return client_data->response.error; > + > + return client_data->response.size; > +} > + > +/** > + * process_recv() - Receive and parse incoming packet > + * @loader_ishtp_cl: Client instance to get stats > + * @rb_in_proc: ISH received message buffer > + * > + * Parse the incoming packet. If it is a response packet then it > will > + * update received and wake up the caller waiting to for the > response. > + */ > +static void process_recv(struct ishtp_cl *loader_ishtp_cl, > + struct ishtp_cl_rb *rb_in_proc) > +{ > + struct loader_msg_hdr *hdr; > + size_t data_len = rb_in_proc->buf_idx; > + struct ishtp_cl_data *client_data = > + ishtp_get_client_data(loader_ishtp_cl); > + > + /* Sanity check */ > + if (!client_data->response.data) { > + dev_err(cl_data_to_dev(client_data), > + "Receiving buffer is null. Should be allocated > by calling function\n"); > + client_data->response.error = -EINVAL; > + goto end; > + } > + > + if (client_data->response.received) { > + dev_err(cl_data_to_dev(client_data), > + "Previous firmware message not yet > processed\n"); > + client_data->response.error = -EINVAL; > + goto end; > + } > + /* > + * All firmware messages have a header. Check buffer size > + * before accessing elements inside. > + */ > + if (!rb_in_proc->buffer.data) { > + dev_warn(cl_data_to_dev(client_data), > + "rb_in_proc->buffer.data returned null"); > + client_data->response.error = -EBADMSG; > + goto end; > + } > + > + if (data_len < sizeof(struct loader_msg_hdr)) { > + dev_err(cl_data_to_dev(client_data), > + "data size %zu is less than header %zu\n", > + data_len, sizeof(struct loader_msg_hdr)); > + client_data->response.error = -EMSGSIZE; > + goto end; > + } > + > + hdr = (struct loader_msg_hdr *)rb_in_proc->buffer.data; > + > + dev_dbg(cl_data_to_dev(client_data), > + "%s: command=%02lx is_response=%u status=%02x\n", > + __func__, > + hdr->command & CMD_MASK, > + hdr->command & IS_RESPONSE ? 1 : 0, > + hdr->status); > + > + if (((hdr->command & CMD_MASK) != LOADER_CMD_XFER_QUERY) && > + ((hdr->command & CMD_MASK) != LOADER_CMD_XFER_FRAGMENT) && > + ((hdr->command & CMD_MASK) != LOADER_CMD_START)) { > + dev_err(cl_data_to_dev(client_data), > + "Invalid command=%02lx\n", > + hdr->command & CMD_MASK); > + client_data->response.error = -EPROTO; > + goto end; > + } > + > + if (data_len > client_data->response.max_size) { > + dev_err(cl_data_to_dev(client_data), > + "Received buffer size %zu is larger than > allocated buffer %zu\n", > + data_len, client_data->response.max_size); > + client_data->response.error = -EMSGSIZE; > + goto end; > + } > + > + /* We expect only "response" messages from firmware */ > + if (!(hdr->command & IS_RESPONSE)) { > + dev_err(cl_data_to_dev(client_data), > + "Invalid response to command\n"); > + client_data->response.error = -EIO; > + goto end; > + } > + > + if (hdr->status) { > + dev_err(cl_data_to_dev(client_data), > + "Loader returned status %d\n", > + hdr->status); > + client_data->response.error = -EIO; > + goto end; > + } > + > + /* Update the actual received buffer size */ > + client_data->response.size = data_len; > + > + /* > + * Copy the buffer received in firmware response for the > + * calling thread. > + */ > + memcpy(client_data->response.data, > + rb_in_proc->buffer.data, data_len); > + > + /* Set flag before waking up the caller */ > + client_data->response.received = true; > + > +end: > + /* Free the buffer */ > + ishtp_cl_io_rb_recycle(rb_in_proc); > + rb_in_proc = NULL; > + > + /* Wake the calling thread */ > + wake_up_interruptible(&client_data->response.wait_queue); > +} > + > +/** > + * loader_cl_event_cb() - bus driver callback for incoming message > + * @device: Pointer to the ishtp client device for which > this > + * message is targeted > + * > + * Remove the packet from the list and process the message by > calling > + * process_recv > + */ > +static void loader_cl_event_cb(struct ishtp_cl_device *cl_device) > +{ > + struct ishtp_cl_rb *rb_in_proc; > + struct ishtp_cl *loader_ishtp_cl = > ishtp_get_drvdata(cl_device); > + > + while ((rb_in_proc = ishtp_cl_rx_get_rb(loader_ishtp_cl)) != > NULL) { > + /* Process the data packet from firmware */ > + process_recv(loader_ishtp_cl, rb_in_proc); > + } > +} > + > +/** > + * ish_query_loader_prop() - Query ISH Shim firmware loader > + * @client_data: Client data instance > + * @fw: Poiner to firmware data struct in host > memory > + * @fw_info: Loader firmware properties > + * > + * This function queries the ISH Shim firmware loader for > capabilities. > + * > + * Return: 0 for success, negative error code for failure. > + */ > +static int ish_query_loader_prop(struct ishtp_cl_data *client_data, > + const struct firmware *fw, > + struct shim_fw_info *fw_info) > +{ > + int rv; > + struct loader_xfer_query ldr_xfer_query; > + struct loader_xfer_query_response ldr_xfer_query_resp; > + > + memset(&ldr_xfer_query, 0, sizeof(ldr_xfer_query)); > + ldr_xfer_query.hdr.command = LOADER_CMD_XFER_QUERY; > + ldr_xfer_query.image_size = fw->size; > + rv = loader_cl_send(client_data, > + (u8 *)&ldr_xfer_query, > + sizeof(ldr_xfer_query), > + (u8 *)&ldr_xfer_query_resp, > + sizeof(ldr_xfer_query_resp)); > + if (rv < 0) { > + client_data->flag_retry = true; > + return rv; > + } > + > + /* On success, the return value is the received buffer size */ > + if (rv != sizeof(struct loader_xfer_query_response)) { > + dev_err(cl_data_to_dev(client_data), > + "data size %d is not equal to size of > loader_xfer_query_response %zu\n", > + rv, sizeof(struct loader_xfer_query_response)); > + client_data->flag_retry = true; > + return -EMSGSIZE; > + } > + > + /* Save fw_info for use outside this function */ > + *fw_info = ldr_xfer_query_resp.fw_info; > + > + /* Loader firmware properties */ > + dev_dbg(cl_data_to_dev(client_data), > + "ish_fw_version: major=%d minor=%d hotfix=%d build=%d > protocol_version=0x%x loader_version=%d\n", > + fw_info->ish_fw_version.major, > + fw_info->ish_fw_version.minor, > + fw_info->ish_fw_version.hotfix, > + fw_info->ish_fw_version.build, > + fw_info->protocol_version, > + fw_info->ldr_version.value); > + > + dev_dbg(cl_data_to_dev(client_data), > + "loader_capability: max_fw_image_size=0x%x xfer_mode=%d > max_dma_buf_size=0x%x dma_buf_size_limit=0x%x\n", > + fw_info->ldr_capability.max_fw_image_size, > + fw_info->ldr_capability.xfer_mode, > + fw_info->ldr_capability.max_dma_buf_size, > + dma_buf_size_limit); > + > + /* Sanity checks */ > + if (fw_info->ldr_capability.max_fw_image_size < fw->size) { > + dev_err(cl_data_to_dev(client_data), > + "ISH firmware size %zu is greater than Shim > firmware loader max supported %d\n", > + fw->size, > + fw_info->ldr_capability.max_fw_image_size); > + return -ENOSPC; > + } > + > + /* For DMA the buffer size should be multiple of cacheline size > */ > + if ((fw_info->ldr_capability.xfer_mode & > LOADER_XFER_MODE_DIRECT_DMA) && > + (fw_info->ldr_capability.max_dma_buf_size % > L1_CACHE_BYTES)) { > + dev_err(cl_data_to_dev(client_data), > + "Shim firmware loader buffer size %d should be > multipe of cacheline\n", > + fw_info->ldr_capability.max_dma_buf_size); > + return -EINVAL; > + } > + > + return 0; > +} > + > +/** > + * ish_fw_xfer_ishtp() Loads ISH firmware using ishtp > interface > + * @client_data: Client data instance > + * @fw: Pointer to firmware data struct in host > memory > + * > + * This function uses ISH-TP to transfer ISH firmware from host to > + * ISH SRAM. Lower layers may use IPC or DMA depending on firmware > + * support. > + * > + * Return: 0 for success, negative error code for failure. > + */ > +static int ish_fw_xfer_ishtp(struct ishtp_cl_data *client_data, > + const struct firmware *fw) > +{ > + int rv; > + u32 fragment_offset, fragment_size, payload_max_size; > + struct loader_xfer_ipc_fragment *ldr_xfer_ipc_frag; > + struct loader_msg_hdr ldr_xfer_ipc_ack; > + > + payload_max_size = > + LOADER_SHIM_IPC_BUF_SIZE - IPC_FRAGMENT_DATA_PREAMBLE; > + > + ldr_xfer_ipc_frag = kzalloc(LOADER_SHIM_IPC_BUF_SIZE, > GFP_KERNEL); > + if (!ldr_xfer_ipc_frag) { > + client_data->flag_retry = true; > + return -ENOMEM; > + } > + > + ldr_xfer_ipc_frag->fragment.hdr.command = > LOADER_CMD_XFER_FRAGMENT; > + ldr_xfer_ipc_frag->fragment.xfer_mode = LOADER_XFER_MODE_ISHTP; > + > + /* Break the firmware image into fragments and send as ISH-TP > payload */ > + fragment_offset = 0; > + while (fragment_offset < fw->size) { > + if (fragment_offset + payload_max_size < fw->size) { > + fragment_size = payload_max_size; > + ldr_xfer_ipc_frag->fragment.is_last = 0; > + } else { > + fragment_size = fw->size - fragment_offset; > + ldr_xfer_ipc_frag->fragment.is_last = 1; > + } > + > + ldr_xfer_ipc_frag->fragment.offset = fragment_offset; > + ldr_xfer_ipc_frag->fragment.size = fragment_size; > + memcpy(ldr_xfer_ipc_frag->data, > + &fw->data[fragment_offset], > + fragment_size); > + > + dev_dbg(cl_data_to_dev(client_data), > + "xfer_mode=ipc offset=0x%08x size=0x%08x > is_last=%d\n", > + ldr_xfer_ipc_frag->fragment.offset, > + ldr_xfer_ipc_frag->fragment.size, > + ldr_xfer_ipc_frag->fragment.is_last); > + > + rv = loader_cl_send(client_data, > + (u8 *)ldr_xfer_ipc_frag, > + IPC_FRAGMENT_DATA_PREAMBLE + > fragment_size, > + (u8 *)&ldr_xfer_ipc_ack, > + sizeof(ldr_xfer_ipc_ack)); > + if (rv < 0) { > + client_data->flag_retry = true; > + goto end_err_resp_buf_release; > + } > + > + fragment_offset += fragment_size; > + } > + > + kfree(ldr_xfer_ipc_frag); > + return 0; > + > +end_err_resp_buf_release: > + /* Free ISH buffer if not done already, in error case */ > + kfree(ldr_xfer_ipc_frag); > + return rv; > +} > + > +/** > + * ish_fw_xfer_direct_dma() - Loads ISH firmware using direct dma > + * @client_data: Client data instance > + * @fw: Pointer to firmware data struct in host > memory > + * @fw_info: Loader firmware properties > + * > + * Host firmware load is a unique case where we need to download > + * a large firmware image (200+ Kb). This function implements > + * direct DMA transfer in kernel and ISH firmware. This allows > + * us to overcome the ISH-TP 4 Kb limit, and allows us to DMA > + * directly to ISH UMA at location of choice. > + * Function depends on corresponding support in ISH firmware. > + * > + * Return: 0 for success, negative error code for failure. > + */ > +static int ish_fw_xfer_direct_dma(struct ishtp_cl_data *client_data, > + const struct firmware *fw, > + const struct shim_fw_info fw_info) > +{ > + int rv; > + void *dma_buf; > + dma_addr_t dma_buf_phy; > + u32 fragment_offset, fragment_size, payload_max_size; > + struct loader_msg_hdr ldr_xfer_dma_frag_ack; > + struct loader_xfer_dma_fragment ldr_xfer_dma_frag; > + struct device *devc = ishtp_get_pci_device(client_data- > >cl_device); > + u32 shim_fw_buf_size = > + fw_info.ldr_capability.max_dma_buf_size; > + > + /* > + * payload_max_size should be set to minimum of > + * (1) Size of firmware to be loaded, > + * (2) Max DMA buffer size supported by Shim firmware, > + * (3) DMA buffer size limit set by boot_param > dma_buf_size_limit. > + */ > + payload_max_size = min3(fw->size, > + (size_t)shim_fw_buf_size, > + (size_t)dma_buf_size_limit); > + > + /* > + * Buffer size should be multiple of cacheline size > + * if it's not, select the previous cacheline boundary. > + */ > + payload_max_size &= ~(L1_CACHE_BYTES - 1); > + > + dma_buf = kmalloc(payload_max_size, GFP_KERNEL | GFP_DMA32); > + if (!dma_buf) { > + client_data->flag_retry = true; > + return -ENOMEM; > + } > + > + dma_buf_phy = dma_map_single(devc, dma_buf, payload_max_size, > + DMA_TO_DEVICE); > + if (dma_mapping_error(devc, dma_buf_phy)) { > + dev_err(cl_data_to_dev(client_data), "DMA map > failed\n"); > + client_data->flag_retry = true; > + rv = -ENOMEM; > + goto end_err_dma_buf_release; > + } > + > + ldr_xfer_dma_frag.fragment.hdr.command = > LOADER_CMD_XFER_FRAGMENT; > + ldr_xfer_dma_frag.fragment.xfer_mode = > LOADER_XFER_MODE_DIRECT_DMA; > + ldr_xfer_dma_frag.ddr_phys_addr = (u64)dma_buf_phy; > + > + /* Send the firmware image in chucks of payload_max_size */ > + fragment_offset = 0; > + while (fragment_offset < fw->size) { > + if (fragment_offset + payload_max_size < fw->size) { > + fragment_size = payload_max_size; > + ldr_xfer_dma_frag.fragment.is_last = 0; > + } else { > + fragment_size = fw->size - fragment_offset; > + ldr_xfer_dma_frag.fragment.is_last = 1; > + } > + > + ldr_xfer_dma_frag.fragment.offset = fragment_offset; > + ldr_xfer_dma_frag.fragment.size = fragment_size; > + memcpy(dma_buf, &fw->data[fragment_offset], > fragment_size); > + > + dma_sync_single_for_device(devc, dma_buf_phy, > + payload_max_size, > + DMA_TO_DEVICE); > + > + /* > + * Flush cache here because the > dma_sync_single_for_device() > + * does not do for x86. > + */ > + clflush_cache_range(dma_buf, payload_max_size); > + > + dev_dbg(cl_data_to_dev(client_data), > + "xfer_mode=dma offset=0x%08x size=0x%x > is_last=%d ddr_phys_addr=0x%016llx\n", > + ldr_xfer_dma_frag.fragment.offset, > + ldr_xfer_dma_frag.fragment.size, > + ldr_xfer_dma_frag.fragment.is_last, > + ldr_xfer_dma_frag.ddr_phys_addr); > + > + rv = loader_cl_send(client_data, > + (u8 *)&ldr_xfer_dma_frag, > + sizeof(ldr_xfer_dma_frag), > + (u8 *)&ldr_xfer_dma_frag_ack, > + sizeof(ldr_xfer_dma_frag_ack)); > + if (rv < 0) { > + client_data->flag_retry = true; > + goto end_err_resp_buf_release; > + } > + > + fragment_offset += fragment_size; > + } > + > + dma_unmap_single(devc, dma_buf_phy, payload_max_size, > DMA_TO_DEVICE); > + kfree(dma_buf); > + return 0; > + > +end_err_resp_buf_release: > + /* Free ISH buffer if not done already, in error case */ > + dma_unmap_single(devc, dma_buf_phy, payload_max_size, > DMA_TO_DEVICE); > +end_err_dma_buf_release: > + kfree(dma_buf); > + return rv; > +} > + > +/** > + * ish_fw_start() Start executing ISH main firmware > + * @client_data: client data instance > + * > + * This function sends message to Shim firmware loader to start > + * the execution of ISH main firmware. > + * > + * Return: 0 for success, negative error code for failure. > + */ > +static int ish_fw_start(struct ishtp_cl_data *client_data) > +{ > + struct loader_start ldr_start; > + struct loader_msg_hdr ldr_start_ack; > + > + memset(&ldr_start, 0, sizeof(ldr_start)); > + ldr_start.hdr.command = LOADER_CMD_START; > + return loader_cl_send(client_data, > + (u8 *)&ldr_start, > + sizeof(ldr_start), > + (u8 *)&ldr_start_ack, > + sizeof(ldr_start_ack)); > +} > + > +/** > + * load_fw_from_host() Loads ISH firmware from host > + * @client_data: Client data instance > + * > + * This function loads the ISH firmware to ISH SRAM and starts > execution > + * > + * Return: 0 for success, negative error code for failure. > + */ > +static int load_fw_from_host(struct ishtp_cl_data *client_data) > +{ > + int rv; > + u32 xfer_mode; > + char *filename; > + const struct firmware *fw; > + struct shim_fw_info fw_info; > + struct ishtp_cl *loader_ishtp_cl = client_data- > >loader_ishtp_cl; > + > + client_data->flag_retry = false; > + > + filename = kzalloc(FILENAME_SIZE, GFP_KERNEL); > + if (!filename) { > + client_data->flag_retry = true; > + rv = -ENOMEM; > + goto end_error; > + } > + > + /* Get filename of the ISH firmware to be loaded */ > + rv = get_firmware_variant(client_data, filename); > + if (rv < 0) > + goto end_err_filename_buf_release; > + > + rv = request_firmware(&fw, filename, > cl_data_to_dev(client_data)); > + if (rv < 0) > + goto end_err_filename_buf_release; > + > + /* Step 1: Query Shim firmware loader properties */ > + > + rv = ish_query_loader_prop(client_data, fw, &fw_info); > + if (rv < 0) > + goto end_err_fw_release; > + > + /* Step 2: Send the main firmware image to be loaded, to ISH > SRAM */ > + > + xfer_mode = fw_info.ldr_capability.xfer_mode; > + if (xfer_mode & LOADER_XFER_MODE_DIRECT_DMA) { > + rv = ish_fw_xfer_direct_dma(client_data, fw, fw_info); > + } else if (xfer_mode & LOADER_XFER_MODE_ISHTP) { > + rv = ish_fw_xfer_ishtp(client_data, fw); > + } else { > + dev_err(cl_data_to_dev(client_data), > + "No transfer mode selected in firmware\n"); > + rv = -EINVAL; > + } > + if (rv < 0) > + goto end_err_fw_release; > + > + /* Step 3: Start ISH main firmware exeuction */ > + > + rv = ish_fw_start(client_data); > + if (rv < 0) > + goto end_err_fw_release; > + > + release_firmware(fw); > + kfree(filename); > + dev_info(cl_data_to_dev(client_data), "ISH firmware %s > loaded\n", > + filename); > + return 0; > + > +end_err_fw_release: > + release_firmware(fw); > +end_err_filename_buf_release: > + kfree(filename); > +end_error: > + /* Keep a count of retries, and give up after 3 attempts */ > + if (client_data->flag_retry && > + client_data->retry_count++ < MAX_LOAD_ATTEMPTS) { > + dev_warn(cl_data_to_dev(client_data), > + "ISH host firmware load failed %d. Resetting > ISH, and trying again..\n", > + rv); > + ish_hw_reset(ishtp_get_ishtp_device(loader_ishtp_cl)); > + } else { > + dev_err(cl_data_to_dev(client_data), > + "ISH host firmware load failed %d\n", rv); > + } > + return rv; > +} > + > +static void load_fw_from_host_handler(struct work_struct *work) > +{ > + struct ishtp_cl_data *client_data; > + > + client_data = container_of(work, struct ishtp_cl_data, > + work_fw_load); > + load_fw_from_host(client_data); > +} > + > +/** > + * loader_init() - Init function for ISH-TP client > + * @loader_ishtp_cl: ISH-TP client instance > + * @reset: true if called for init after reset > + * > + * Return: 0 for success, negative error code for failure > + */ > +static int loader_init(struct ishtp_cl *loader_ishtp_cl, int reset) > +{ > + int rv; > + struct ishtp_fw_client *fw_client; > + struct ishtp_cl_data *client_data = > + ishtp_get_client_data(loader_ishtp_cl); > + > + dev_dbg(cl_data_to_dev(client_data), "reset flag: %d\n", > reset); > + > + rv = ishtp_cl_link(loader_ishtp_cl); > + if (rv < 0) { > + dev_err(cl_data_to_dev(client_data), "ishtp_cl_link > failed\n"); > + return rv; > + } > + > + /* Connect to firmware client */ > + ishtp_set_tx_ring_size(loader_ishtp_cl, > LOADER_CL_TX_RING_SIZE); > + ishtp_set_rx_ring_size(loader_ishtp_cl, > LOADER_CL_RX_RING_SIZE); > + > + fw_client = > + ishtp_fw_cl_get_client(ishtp_get_ishtp_device(loader_is > htp_cl), > + &loader_ishtp_guid); > + if (!fw_client) { > + dev_err(cl_data_to_dev(client_data), > + "ISH client uuid not found\n"); > + rv = -ENOENT; > + goto err_cl_unlink; > + } > + > + ishtp_cl_set_fw_client_id(loader_ishtp_cl, > + ishtp_get_fw_client_id(fw_client)); > + ishtp_set_connection_state(loader_ishtp_cl, > ISHTP_CL_CONNECTING); > + > + rv = ishtp_cl_connect(loader_ishtp_cl); > + if (rv < 0) { > + dev_err(cl_data_to_dev(client_data), "Client connect > fail\n"); > + goto err_cl_unlink; > + } > + > + dev_dbg(cl_data_to_dev(client_data), "Client connected\n"); > + > + ishtp_register_event_cb(client_data->cl_device, > loader_cl_event_cb); > + > + return 0; > + > +err_cl_unlink: > + ishtp_cl_unlink(loader_ishtp_cl); > + return rv; > +} > + > +static void loader_deinit(struct ishtp_cl *loader_ishtp_cl) > +{ > + ishtp_set_connection_state(loader_ishtp_cl, > ISHTP_CL_DISCONNECTING); > + ishtp_cl_disconnect(loader_ishtp_cl); > + ishtp_cl_unlink(loader_ishtp_cl); > + ishtp_cl_flush_queues(loader_ishtp_cl); > + > + /* Disband and free all Tx and Rx client-level rings */ > + ishtp_cl_free(loader_ishtp_cl); > +} > + > +static void reset_handler(struct work_struct *work) > +{ > + int rv; > + struct ishtp_cl_data *client_data; > + struct ishtp_cl *loader_ishtp_cl; > + struct ishtp_cl_device *cl_device; > + > + client_data = container_of(work, struct ishtp_cl_data, > + work_ishtp_reset); > + > + loader_ishtp_cl = client_data->loader_ishtp_cl; > + cl_device = client_data->cl_device; > + > + /* Unlink, flush queues & start again */ > + ishtp_cl_unlink(loader_ishtp_cl); > + ishtp_cl_flush_queues(loader_ishtp_cl); > + ishtp_cl_free(loader_ishtp_cl); > + > + loader_ishtp_cl = ishtp_cl_allocate(cl_device); > + if (!loader_ishtp_cl) > + return; > + > + ishtp_set_drvdata(cl_device, loader_ishtp_cl); > + ishtp_set_client_data(loader_ishtp_cl, client_data); > + client_data->loader_ishtp_cl = loader_ishtp_cl; > + client_data->cl_device = cl_device; > + > + rv = loader_init(loader_ishtp_cl, 1); > + if (rv < 0) { > + dev_err(ishtp_device(cl_device), "Reset Failed\n"); > + return; > + } > + > + /* ISH firmware loading from host */ > + load_fw_from_host(client_data); > +} > + > +/** > + * loader_ishtp_cl_probe() - ISH-TP client driver probe > + * @cl_device: ISH-TP client device instance > + * > + * This function gets called on device create on ISH-TP bus > + * > + * Return: 0 for success, negative error code for failure > + */ > +static int loader_ishtp_cl_probe(struct ishtp_cl_device *cl_device) > +{ > + struct ishtp_cl *loader_ishtp_cl; > + struct ishtp_cl_data *client_data; > + int rv; > + > + client_data = devm_kzalloc(ishtp_device(cl_device), > + sizeof(*client_data), > + GFP_KERNEL); > + if (!client_data) > + return -ENOMEM; > + > + loader_ishtp_cl = ishtp_cl_allocate(cl_device); > + if (!loader_ishtp_cl) > + return -ENOMEM; > + > + ishtp_set_drvdata(cl_device, loader_ishtp_cl); > + ishtp_set_client_data(loader_ishtp_cl, client_data); > + client_data->loader_ishtp_cl = loader_ishtp_cl; > + client_data->cl_device = cl_device; > + > + init_waitqueue_head(&client_data->response.wait_queue); > + > + INIT_WORK(&client_data->work_ishtp_reset, > + reset_handler); > + INIT_WORK(&client_data->work_fw_load, > + load_fw_from_host_handler); > + > + rv = loader_init(loader_ishtp_cl, 0); > + if (rv < 0) { > + ishtp_cl_free(loader_ishtp_cl); > + return rv; > + } > + ishtp_get_device(cl_device); > + > + client_data->retry_count = 0; > + > + /* ISH firmware loading from host */ > + schedule_work(&client_data->work_fw_load); > + > + return 0; > +} > + > +/** > + * loader_ishtp_cl_remove() - ISH-TP client driver remove > + * @cl_device: ISH-TP client device instance > + * > + * This function gets called on device remove on ISH-TP bus > + * > + * Return: 0 > + */ > +static int loader_ishtp_cl_remove(struct ishtp_cl_device *cl_device) > +{ > + struct ishtp_cl_data *client_data; > + struct ishtp_cl *loader_ishtp_cl = > ishtp_get_drvdata(cl_device); > + > + client_data = ishtp_get_client_data(loader_ishtp_cl); > + > + /* > + * The sequence of the following two cancel_work_sync() is > + * important. The work_fw_load can in turn schedue > + * work_ishtp_reset, so first cancel work_fw_load then > + * cancel work_ishtp_reset. > + */ > + cancel_work_sync(&client_data->work_fw_load); > + cancel_work_sync(&client_data->work_ishtp_reset); > + loader_deinit(loader_ishtp_cl); > + ishtp_put_device(cl_device); > + > + return 0; > +} > + > +/** > + * loader_ishtp_cl_reset() - ISH-TP client driver reset > + * @cl_device: ISH-TP client device instance > + * > + * This function gets called on device reset on ISH-TP bus > + * > + * Return: 0 > + */ > +static int loader_ishtp_cl_reset(struct ishtp_cl_device *cl_device) > +{ > + struct ishtp_cl_data *client_data; > + struct ishtp_cl *loader_ishtp_cl = > ishtp_get_drvdata(cl_device); > + > + client_data = ishtp_get_client_data(loader_ishtp_cl); > + > + schedule_work(&client_data->work_ishtp_reset); > + > + return 0; > +} > + > +static struct ishtp_cl_driver loader_ishtp_cl_driver = { > + .name = "ish-loader", > + .guid = &loader_ishtp_guid, > + .probe = loader_ishtp_cl_probe, > + .remove = loader_ishtp_cl_remove, > + .reset = loader_ishtp_cl_reset, > +}; > + > +static int __init ish_loader_init(void) > +{ > + return ishtp_cl_driver_register(&loader_ishtp_cl_driver, > THIS_MODULE); > +} > + > +static void __exit ish_loader_exit(void) > +{ > + ishtp_cl_driver_unregister(&loader_ishtp_cl_driver); > +} > + > +late_initcall(ish_loader_init); > +module_exit(ish_loader_exit); > + > +module_param(dma_buf_size_limit, int, 0644); > +MODULE_PARM_DESC(dma_buf_size_limit, "Limit the DMA buf size to this > value in bytes"); > + > +MODULE_DESCRIPTION("ISH ISH-TP Host firmware Loader Client Driver"); > +MODULE_AUTHOR("Rushikesh S Kadam <rushikesh.s.kadam@xxxxxxxxx>"); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("ishtp:*");
