From: Jason Gerecke <jason.gerecke@xxxxxxxxx>
Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:
$ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0
https://github.com/linuxwacom/xf86-input-wacom/issues/40
Signed-off-by: Jason Gerecke <jason.gerecke@xxxxxxxxx>
---
drivers/input/tablet/wacom_serial4.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c
index 38bfaca48eab..150f9eecaca7 100644
--- a/drivers/input/tablet/wacom_serial4.c
+++ b/drivers/input/tablet/wacom_serial4.c
@@ -187,6 +187,7 @@ enum {
MODEL_DIGITIZER_II = 0x5544, /* UD */
MODEL_GRAPHIRE = 0x4554, /* ET */
MODEL_PENPARTNER = 0x4354, /* CT */
+ MODEL_ARTPAD_II = 0x4B54, /* KT */
};
static void wacom_handle_model_response(struct wacom *wacom)
@@ -245,6 +246,7 @@ static void wacom_handle_model_response(struct wacom *wacom)
wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
break;
+ case MODEL_ARTPAD_II:
case MODEL_DIGITIZER_II:
wacom->dev->name = "Wacom Digitizer II";
wacom->dev->id.version = MODEL_DIGITIZER_II;
--
2.20.1
