On Tue, 05 Feb 2019, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
>
> Add the core mfd driver for max77650 PMIC. We define five sub-devices
> for which the drivers will be added in subsequent patches.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> ---
> drivers/mfd/Kconfig | 11 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max77650.c | 342 +++++++++++++++++++++++++++++++++++
> include/linux/mfd/max77650.h | 59 ++++++
> 4 files changed, 413 insertions(+)
> create mode 100644 drivers/mfd/max77650.c
> create mode 100644 include/linux/mfd/max77650.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 76f9909cf396..a80c3fe80fbe 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -734,6 +734,17 @@ config MFD_MAX77620
> provides common support for accessing the device; additional drivers
> must be enabled in order to use the functionality of the device.
>
> +config MFD_MAX77650
> + tristate "Maxim MAX77650/77651 PMIC Support"
> + depends on I2C
> + depends on OF || COMPILE_TEST
> + select MFD_CORE
> + select REGMAP_I2C
> + help
> + Say yes here to add support for Maxim Semiconductor MAX77650 and
> + MAX77651 Power Management ICs. This is the core multifunction
> + driver for interacting with the device.
> +
> config MFD_MAX77686
> tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
> depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 12980a4ad460..3b912a4015d1 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -151,6 +151,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o
>
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> obj-$(CONFIG_MFD_MAX77620) += max77620.o
> +obj-$(CONFIG_MFD_MAX77650) += max77650.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> obj-$(CONFIG_MFD_MAX77843) += max77843.o
> diff --git a/drivers/mfd/max77650.c b/drivers/mfd/max77650.c
> new file mode 100644
> index 000000000000..7c6164f1fde4
> --- /dev/null
> +++ b/drivers/mfd/max77650.c
> @@ -0,0 +1,342 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2018 BayLibre SAS
> +// Author: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> +//
> +// Core MFD driver for MAXIM 77650/77651 charger/power-supply.
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max77650.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define MAX77650_INT_GPI_F_MSK BIT(0)
> +#define MAX77650_INT_GPI_R_MSK BIT(1)
> +#define MAX77650_INT_GPI_MSK \
> + (MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK)
> +#define MAX77650_INT_nEN_F_MSK BIT(2)
> +#define MAX77650_INT_nEN_R_MSK BIT(3)
> +#define MAX77650_INT_TJAL1_R_MSK BIT(4)
> +#define MAX77650_INT_TJAL2_R_MSK BIT(5)
> +#define MAX77650_INT_DOD_R_MSK BIT(6)
> +
> +#define MAX77650_INT_THM_MSK BIT(0)
> +#define MAX77650_INT_CHG_MSK BIT(1)
> +#define MAX77650_INT_CHGIN_MSK BIT(2)
> +#define MAX77650_INT_TJ_REG_MSK BIT(3)
> +#define MAX77650_INT_CHGIN_CTRL_MSK BIT(4)
> +#define MAX77650_INT_SYS_CTRL_MSK BIT(5)
> +#define MAX77650_INT_SYS_CNFG_MSK BIT(6)
> +
> +#define MAX77650_INT_GLBL_OFFSET 0
> +#define MAX77650_INT_CHG_OFFSET 1
> +
> +#define MAX77650_SBIA_LPM_MASK BIT(5)
> +#define MAX77650_SBIA_LPM_DISABLED 0x00
> +
> +enum {
> + MAX77650_INT_GPI = 0,
> + MAX77650_INT_nEN_F,
> + MAX77650_INT_nEN_R,
> + MAX77650_INT_TJAL1_R,
> + MAX77650_INT_TJAL2_R,
> + MAX77650_INT_DOD_R,
> + MAX77650_INT_THM,
> + MAX77650_INT_CHG,
> + MAX77650_INT_CHGIN,
> + MAX77650_INT_TJ_REG,
> + MAX77650_INT_CHGIN_CTRL,
> + MAX77650_INT_SYS_CTRL,
> + MAX77650_INT_SYS_CNFG,
> +};
> +
> +enum {
> + MAX77650_CELL_REGULATOR = 0,
> + MAX77650_CELL_CHARGER,
> + MAX77650_CELL_GPIO,
> + MAX77650_CELL_LED,
> + MAX77650_CELL_ONKEY,
> + MAX77650_NUM_CELLS,
> +};
> +
> +struct max77650_irq_mapping {
> + int cell_num;
> + const int *irqs;
> + const char *const *irq_names;
> + unsigned int num_irqs;
> +};
> +
> +static const int max77650_charger_irqs[] = {
> + MAX77650_INT_CHG,
> + MAX77650_INT_CHGIN,
> +};
> +
> +static const int max77650_gpio_irqs[] = {
> + MAX77650_INT_GPI,
> +};
> +
> +static const int max77650_onkey_irqs[] = {
> + MAX77650_INT_nEN_F,
> + MAX77650_INT_nEN_R,
> +};
> +
> +static const char *const max77650_charger_irq_names[] = {
> + "CHG",
> + "CHGIN",
> +};
> +
> +static const char *const max77650_gpio_irq_names[] = {
> + "GPI",
> +};
> +
> +static const char *const max77650_onkey_irq_names[] = {
> + "nEN_F",
> + "nEN_R",
> +};
> +
> +static const struct max77650_irq_mapping max77650_irq_mapping_table[] = {
> + {
> + .cell_num = MAX77650_CELL_CHARGER,
> + .irqs = max77650_charger_irqs,
> + .irq_names = max77650_charger_irq_names,
> + .num_irqs = ARRAY_SIZE(max77650_charger_irqs),
> + },
> + {
> + .cell_num = MAX77650_CELL_GPIO,
> + .irqs = max77650_gpio_irqs,
> + .irq_names = max77650_gpio_irq_names,
> + .num_irqs = ARRAY_SIZE(max77650_gpio_irqs),
> + },
> + {
> + .cell_num = MAX77650_CELL_ONKEY,
> + .irqs = max77650_onkey_irqs,
> + .irq_names = max77650_onkey_irq_names,
> + .num_irqs = ARRAY_SIZE(max77650_onkey_irqs),
> + },
> +};
This is all a bit convoluted and nasty TBH.
> +static const struct mfd_cell max77650_cells[] = {
> + [MAX77650_CELL_REGULATOR] = {
> + .name = "max77650-regulator",
> + .of_compatible = "maxim,max77650-regulator",
> + },
> + [MAX77650_CELL_CHARGER] = {
> + .name = "max77650-charger",
> + .of_compatible = "maxim,max77650-charger",
> + },
> + [MAX77650_CELL_GPIO] = {
> + .name = "max77650-gpio",
> + .of_compatible = "maxim,max77650-gpio",
> + },
> + [MAX77650_CELL_LED] = {
> + .name = "max77650-led",
> + .of_compatible = "maxim,max77650-led",
> + },
> + [MAX77650_CELL_ONKEY] = {
> + .name = "max77650-onkey",
> + .of_compatible = "maxim,max77650-onkey",
> + },
> +};
Why are you numbering the cells? There is no need to do this.
> +static const struct regmap_irq max77650_irqs[] = {
> + [MAX77650_INT_GPI] = {
> + .reg_offset = MAX77650_INT_GLBL_OFFSET,
> + .mask = MAX77650_INT_GPI_MSK,
> + .type = {
> + .type_falling_val = MAX77650_INT_GPI_F_MSK,
> + .type_rising_val = MAX77650_INT_GPI_R_MSK,
> + .types_supported = IRQ_TYPE_EDGE_BOTH,
> + },
> + },
> + [MAX77650_INT_nEN_F] = {
> + .reg_offset = MAX77650_INT_GLBL_OFFSET,
> + .mask = MAX77650_INT_nEN_F_MSK,
> + },
> + [MAX77650_INT_nEN_R] = {
> + .reg_offset = MAX77650_INT_GLBL_OFFSET,
> + .mask = MAX77650_INT_nEN_R_MSK,
> + },
> + [MAX77650_INT_TJAL1_R] = {
> + .reg_offset = MAX77650_INT_GLBL_OFFSET,
> + .mask = MAX77650_INT_TJAL1_R_MSK,
> + },
> + [MAX77650_INT_TJAL2_R] = {
> + .reg_offset = MAX77650_INT_GLBL_OFFSET,
> + .mask = MAX77650_INT_TJAL2_R_MSK,
> + },
> + [MAX77650_INT_DOD_R] = {
> + .reg_offset = MAX77650_INT_GLBL_OFFSET,
> + .mask = MAX77650_INT_DOD_R_MSK,
> + },
> + [MAX77650_INT_THM] = {
> + .reg_offset = MAX77650_INT_CHG_OFFSET,
> + .mask = MAX77650_INT_THM_MSK,
> + },
> + [MAX77650_INT_CHG] = {
> + .reg_offset = MAX77650_INT_CHG_OFFSET,
> + .mask = MAX77650_INT_CHG_MSK,
> + },
> + [MAX77650_INT_CHGIN] = {
> + .reg_offset = MAX77650_INT_CHG_OFFSET,
> + .mask = MAX77650_INT_CHGIN_MSK,
> + },
> + [MAX77650_INT_TJ_REG] = {
> + .reg_offset = MAX77650_INT_CHG_OFFSET,
> + .mask = MAX77650_INT_TJ_REG_MSK,
> + },
> + [MAX77650_INT_CHGIN_CTRL] = {
> + .reg_offset = MAX77650_INT_CHG_OFFSET,
> + .mask = MAX77650_INT_CHGIN_CTRL_MSK,
> + },
> + [MAX77650_INT_SYS_CTRL] = {
> + .reg_offset = MAX77650_INT_CHG_OFFSET,
> + .mask = MAX77650_INT_SYS_CTRL_MSK,
> + },
> + [MAX77650_INT_SYS_CNFG] = {
> + .reg_offset = MAX77650_INT_CHG_OFFSET,
> + .mask = MAX77650_INT_SYS_CNFG_MSK,
> + },
> +};
If you get rid of all of the horrible hoop jumping in *_setup_irqs(),
you can use REGMAP_IRQ_REG() like everyone else does.
> +static const struct regmap_irq_chip max77650_irq_chip = {
> + .name = "max77650-irq",
> + .irqs = max77650_irqs,
> + .num_irqs = ARRAY_SIZE(max77650_irqs),
> + .num_regs = 2,
> + .status_base = MAX77650_REG_INT_GLBL,
> + .mask_base = MAX77650_REG_INTM_GLBL,
> + .type_in_mask = true,
> + .type_invert = true,
> + .init_ack_masked = true,
> + .clear_on_unmask = true,
> +};
> +
> +static const struct regmap_config max77650_regmap_config = {
> + .name = "max77650",
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static int max77650_setup_irqs(struct device *dev, struct mfd_cell *cells)
> +{
> + const struct max77650_irq_mapping *mapping;
> + struct regmap_irq_chip_data *irq_data;
> + struct i2c_client *i2c;
> + struct mfd_cell *cell;
> + struct resource *res;
> + struct regmap *map;
> + int i, j, irq, rv;
> +
> + i2c = to_i2c_client(dev);
> +
> + map = dev_get_regmap(dev, NULL);
> + if (!map)
> + return -ENODEV;
> +
> + rv = devm_regmap_add_irq_chip(dev, map, i2c->irq,
> + IRQF_ONESHOT | IRQF_SHARED, -1,
What is -1? Are you sure this isn't defined somewhere?
> + &max77650_irq_chip, &irq_data);
> + if (rv)
> + return rv;
> +
> + for (i = 0; i < ARRAY_SIZE(max77650_irq_mapping_table); i++) {
> + mapping = &max77650_irq_mapping_table[i];
> + cell = &cells[mapping->cell_num];
> +
> + res = devm_kcalloc(dev, sizeof(*res),
> + mapping->num_irqs, GFP_KERNEL);
> + if (!res)
> + return -ENOMEM;
> +
> + cell->resources = res;
> + cell->num_resources = mapping->num_irqs;
> +
> + for (j = 0; j < mapping->num_irqs; j++) {
> + irq = regmap_irq_get_virq(irq_data, mapping->irqs[j]);
> + if (irq < 0)
> + return irq;
> +
> + res[j].start = res[j].end = irq;
> + res[j].flags = IORESOURCE_IRQ;
> + res[j].name = mapping->irq_names[j];
> + }
> + }
This is the first time I've seen it done like this (and I hate it).
Why are you storing the virqs in resources?
I think this is highly irregular.
> + return 0;
> +}
> +
> +static int max77650_i2c_probe(struct i2c_client *i2c)
> +{
> + struct device *dev = &i2c->dev;
> + struct mfd_cell *cells;
> + struct regmap *map;
> + unsigned int val;
> + int rv;
> +
> + map = devm_regmap_init_i2c(i2c, &max77650_regmap_config);
> + if (IS_ERR(map))
What error messages does devm_regmap_init_i2c() report? Does it print
out its own error messages internally? If not it would be better to
provide a suitable error message here.
> + return PTR_ERR(map);
> +
> + rv = regmap_read(map, MAX77650_REG_CID, &val);
> + if (rv)
Better to provide a suitable error message here.
> + return rv;
> +
> + switch (MAX77650_CID_BITS(val)) {
> + case MAX77650_CID_77650A:
> + case MAX77650_CID_77650C:
> + case MAX77650_CID_77651A:
> + case MAX77650_CID_77651B:
> + break;
> + default:
Better to provide a suitable error message here.
> + return -ENODEV;
> + }
> +
> + /*
> + * This IC has a low-power mode which reduces the quiescent current
> + * consumption to ~5.6uA but is only suitable for systems consuming
> + * less than ~2mA. Since this is not likely the case even on
> + * linux-based wearables - keep the chip in normal power mode.
> + */
> + rv = regmap_update_bits(map,
> + MAX77650_REG_CNFG_GLBL,
> + MAX77650_SBIA_LPM_MASK,
> + MAX77650_SBIA_LPM_DISABLED);
> + if (rv)
Better to provide a suitable error message here.
> + return rv;
> +
> + cells = devm_kmemdup(dev, max77650_cells,
> + sizeof(max77650_cells), GFP_KERNEL);
> + if (!cells)
> + return -ENOMEM;
> +
> + rv = max77650_setup_irqs(dev, cells);
> + if (rv)
> + return rv;
> +
> + return devm_mfd_add_devices(dev, -1, cells,
Use the correct defines instead of -1.
`git grep mfd_add_devices`
> + MAX77650_NUM_CELLS, NULL, 0, NULL);
> +}
> +
> +static const struct of_device_id max77650_of_match[] = {
> + { .compatible = "maxim,max77650" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max77650_of_match);
> +
> +static struct i2c_driver max77650_i2c_driver = {
> + .driver = {
> + .name = "max77650",
> + .of_match_table = of_match_ptr(max77650_of_match),
> + },
> + .probe_new = max77650_i2c_probe,
> +};
> +module_i2c_driver(max77650_i2c_driver);
> +
> +MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver");
> +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/max77650.h b/include/linux/mfd/max77650.h
> new file mode 100644
> index 000000000000..c809e211a8cd
> --- /dev/null
> +++ b/include/linux/mfd/max77650.h
> @@ -0,0 +1,59 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2018 BayLibre SAS
> + * Author: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> + *
> + * Common definitions for MAXIM 77650/77651 charger/power-supply.
> + */
> +
> +#ifndef MAX77650_H
> +#define MAX77650_H
> +
> +#include <linux/bits.h>
> +
> +#define MAX77650_REG_INT_GLBL 0x00
> +#define MAX77650_REG_INT_CHG 0x01
> +#define MAX77650_REG_STAT_CHG_A 0x02
> +#define MAX77650_REG_STAT_CHG_B 0x03
> +#define MAX77650_REG_ERCFLAG 0x04
> +#define MAX77650_REG_STAT_GLBL 0x05
> +#define MAX77650_REG_INTM_GLBL 0x06
> +#define MAX77650_REG_INTM_CHG 0x07
> +#define MAX77650_REG_CNFG_GLBL 0x10
> +#define MAX77650_REG_CID 0x11
> +#define MAX77650_REG_CNFG_GPIO 0x12
> +#define MAX77650_REG_CNFG_CHG_A 0x18
> +#define MAX77650_REG_CNFG_CHG_B 0x19
> +#define MAX77650_REG_CNFG_CHG_C 0x1a
> +#define MAX77650_REG_CNFG_CHG_D 0x1b
> +#define MAX77650_REG_CNFG_CHG_E 0x1c
> +#define MAX77650_REG_CNFG_CHG_F 0x1d
> +#define MAX77650_REG_CNFG_CHG_G 0x1e
> +#define MAX77650_REG_CNFG_CHG_H 0x1f
> +#define MAX77650_REG_CNFG_CHG_I 0x20
> +#define MAX77650_REG_CNFG_SBB_TOP 0x28
> +#define MAX77650_REG_CNFG_SBB0_A 0x29
> +#define MAX77650_REG_CNFG_SBB0_B 0x2a
> +#define MAX77650_REG_CNFG_SBB1_A 0x2b
> +#define MAX77650_REG_CNFG_SBB1_B 0x2c
> +#define MAX77650_REG_CNFG_SBB2_A 0x2d
> +#define MAX77650_REG_CNFG_SBB2_B 0x2e
> +#define MAX77650_REG_CNFG_LDO_A 0x38
> +#define MAX77650_REG_CNFG_LDO_B 0x39
> +#define MAX77650_REG_CNFG_LED0_A 0x40
> +#define MAX77650_REG_CNFG_LED1_A 0x41
> +#define MAX77650_REG_CNFG_LED2_A 0x42
> +#define MAX77650_REG_CNFG_LED0_B 0x43
> +#define MAX77650_REG_CNFG_LED1_B 0x44
> +#define MAX77650_REG_CNFG_LED2_B 0x45
> +#define MAX77650_REG_CNFG_LED_TOP 0x46
> +
> +#define MAX77650_CID_MASK GENMASK(3, 0)
> +#define MAX77650_CID_BITS(_reg) (_reg & MAX77650_CID_MASK)
> +
> +#define MAX77650_CID_77650A 0x03
> +#define MAX77650_CID_77650C 0x0a
> +#define MAX77650_CID_77651A 0x06
> +#define MAX77650_CID_77651B 0x08
> +
> +#endif /* MAX77650_H */
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
