Re: [PATCH v2 5/5] input: misc: bma150: Register input device after setting private data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 02, 2019 at 04:18:06PM +0100, Paweł Chmiel wrote:
> From: Jonathan Bakker <xc-racer2@xxxxxxx>
> 
> Otherwise we introduce a race condition where userspace can request input
> before we're ready leading to null pointer dereference such as
> 
> input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3
> Unable to handle kernel NULL pointer dereference at virtual address 00000018
> pgd = (ptrval)
> [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000
> Internal error: Oops: 17 [#1] PREEMPT ARM
> Modules linked in: bma150 input_polldev [last unloaded: bma150]
> CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46
> Hardware name: Samsung S5PC110/S5PV210-based board
> PC is at input_event+0x8/0x60
> LR is at bma150_report_xyz+0x9c/0xe0 [bma150]
> pc : [<80450f70>]    lr : [<7f0a614c>]    psr: 800d0013
> sp : a4c1fd78  ip : 00000081  fp : 00020000
> r10: 00000000  r9 : a5e2944c  r8 : a7455000
> r7 : 00000016  r6 : 00000101  r5 : a7617940  r4 : 80909048
> r3 : fffffff2  r2 : 00000000  r1 : 00000003  r0 : 00000000
> Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
> Control: 10c5387d  Table: 54e34019  DAC: 00000051
> Process accelerometer (pid: 2870, stack limit = 0x(ptrval))
> Stackck: (0xa4c1fd78 to 0xa4c20000)
> fd60:                                                       fffffff3 fc813f6c
> fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324
> fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10
> fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0
> fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c
> fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000
> fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041
> fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8
> fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001
> fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048
> fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8
> fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720
> fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00
> ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3
> ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002
> ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c
> ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100
> ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000
> ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000
> ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038
> ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000
> [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c)
> Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018)
> ---[ end trace 1c691ee85f2ff243 ]---
> 
> Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>

Applied, thank you.

> ---
>  drivers/input/misc/bma150.c | 15 +++------------
>  1 file changed, 3 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
> index 1cdc8ce97968..64caf43e5bca 100644
> --- a/drivers/input/misc/bma150.c
> +++ b/drivers/input/misc/bma150.c
> @@ -470,7 +470,6 @@ static void bma150_init_input_device(struct bma150_data *bma150,
>  static int bma150_register_input_device(struct bma150_data *bma150)
>  {
>  	struct input_dev *idev;
> -	int error;
>  
>  	idev = devm_input_allocate_device(&bma150->client->dev);
>  	if (!idev)
> @@ -482,18 +481,14 @@ static int bma150_register_input_device(struct bma150_data *bma150)
>  	idev->close = bma150_irq_close;
>  	input_set_drvdata(idev, bma150);
>  
> -	error = input_register_device(idev);
> -	if (error)
> -		return error;
> -
>  	bma150->input = idev;
> -	return 0;
> +
> +	return input_register_device(idev);
>  }
>  
>  static int bma150_register_polled_device(struct bma150_data *bma150)
>  {
>  	struct input_polled_dev *ipoll_dev;
> -	int error;
>  
>  	ipoll_dev = devm_input_allocate_polled_device(&bma150->client->dev);
>  	if (!ipoll_dev)
> @@ -509,14 +504,10 @@ static int bma150_register_polled_device(struct bma150_data *bma150)
>  
>  	bma150_init_input_device(bma150, ipoll_dev->input);
>  
> -	error = input_register_polled_device(ipoll_dev);
> -	if (error)
> -		return error;
> -
>  	bma150->input_polled = ipoll_dev;
>  	bma150->input = ipoll_dev->input;
>  
> -	return 0;
> +	return input_register_polled_device(ipoll_dev);
>  }
>  
>  int bma150_cfg_from_of(struct device_node *np)
> -- 
> 2.17.1
> 

-- 
Dmitry



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux