[PATCH 3/3] input: dt-bindings: Add binding for bma150 sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jonathan Bakker <xc-racer2@xxxxxxx>

Add device tree bindings for Bosch BMA150 Accelerometer Sensor

Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
---
 .../bindings/input/bosch,bma150.txt           | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/bosch,bma150.txt

diff --git a/Documentation/devicetree/bindings/input/bosch,bma150.txt b/Documentation/devicetree/bindings/input/bosch,bma150.txt
new file mode 100644
index 000000000000..290c60e38c70
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/bosch,bma150.txt
@@ -0,0 +1,20 @@
+* Bosch BMA150 Accelerometer Sensor
+
+Also works for the SMB380 and BMA023 accelerometers
+
+Required properties:
+- compatible : Should be "bosch,bma150"
+- reg : The I2C address of the sensor
+
+Optional properties:
+- interrupt-parent : should be the phandle for the interrupt controller
+- interrupts : Interrupt mapping for IRQ.  If not present device will be polled
+
+Example:
+
+bma150@38 {
+	compatible = "bosch,bma150";
+	reg = <0x38>;
+	interrupt-parent = <&gph0>;
+	interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+};
-- 
2.17.1




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux