sob., 19 sty 2019 o 10:03 Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
napisał(a):
>
> Hi Bartosz,
>
> On Fri, Jan 18, 2019 at 02:42:43PM +0100, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> >
> > Add support for the push- and slide-button events for max77650.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > ---
> > drivers/input/misc/Kconfig | 9 ++
> > drivers/input/misc/Makefile | 1 +
> > drivers/input/misc/max77650-onkey.c | 135 ++++++++++++++++++++++++++++
> > 3 files changed, 145 insertions(+)
> > create mode 100644 drivers/input/misc/max77650-onkey.c
> >
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index ca59a2be9bc5..bb9c45c1269e 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -180,6 +180,15 @@ config INPUT_M68K_BEEP
> > tristate "M68k Beeper support"
> > depends on M68K
> >
> > +config INPUT_MAX77650_ONKEY
> > + tristate "Maxim MAX77650 ONKEY support"
> > + depends on MFD_MAX77650
> > + help
> > + Support the ONKEY of the MAX77650 PMIC as an input device.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called max77650-onkey.
> > +
> > config INPUT_MAX77693_HAPTIC
> > tristate "MAXIM MAX77693/MAX77843 haptic controller support"
> > depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
> > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > index 9d0f9d1ff68f..5bd53590ce60 100644
> > --- a/drivers/input/misc/Makefile
> > +++ b/drivers/input/misc/Makefile
> > @@ -43,6 +43,7 @@ obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
> > obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
> > obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
> > obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
> > +obj-$(CONFIG_INPUT_MAX77650_ONKEY) += max77650-onkey.o
> > obj-$(CONFIG_INPUT_MAX77693_HAPTIC) += max77693-haptic.o
> > obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
> > obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
> > diff --git a/drivers/input/misc/max77650-onkey.c b/drivers/input/misc/max77650-onkey.c
> > new file mode 100644
> > index 000000000000..cc7e83f589cd
> > --- /dev/null
> > +++ b/drivers/input/misc/max77650-onkey.c
> > @@ -0,0 +1,135 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2018 BayLibre SAS
> > + * Author: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > + *
> > + * ONKEY driver for MAXIM 77650/77651 charger/power-supply.
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/input.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/mfd/max77650.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +
> > +#define MAX77650_ONKEY_MODE_MASK BIT(3)
> > +#define MAX77650_ONKEY_MODE_PUSH 0x00
> > +#define MAX77650_ONKEY_MODE_SLIDE BIT(3)
> > +
> > +struct max77650_onkey {
> > + struct input_dev *input;
> > + unsigned int code;
> > +};
> > +
> > +static irqreturn_t
> > +max77650_onkey_report(struct max77650_onkey *onkey, int value)
> > +{
> > + input_report_key(onkey->input, onkey->code, value);
> > + input_sync(onkey->input);
> > +
> > + return IRQ_HANDLED;
>
> It is weird that report function returns irqreturn_t. I'd simply moved
> input_report_key()/input_sync() into real IRQ handlers.
>
> > +}
> > +
> > +static irqreturn_t max77650_onkey_falling(int irq, void *data)
> > +{
> > + struct max77650_onkey *onkey = data;
> > +
> > + return max77650_onkey_report(onkey, 0);
> > +}
> > +
> > +static irqreturn_t max77650_onkey_rising(int irq, void *data)
> > +{
> > + struct max77650_onkey *onkey = data;
> > +
> > + return max77650_onkey_report(onkey, 1);
> > +}
> > +
> > +static int max77650_onkey_probe(struct platform_device *pdev)
> > +{
> > + struct regmap_irq_chip_data *irq_data;
> > + struct max77650_onkey *onkey;
> > + struct device *dev, *parent;
> > + int irq_r, irq_f, rv, mode;
>
> Please call "rv" "error".
>
> > + struct i2c_client *i2c;
> > + const char *mode_prop;
> > + struct regmap *map;
> > +
> > + dev = &pdev->dev;
> > + parent = dev->parent;
> > + i2c = to_i2c_client(parent);
> > + irq_data = i2c_get_clientdata(i2c);
> > +
> > + map = dev_get_regmap(parent, NULL);
> > + if (!map)
> > + return -ENODEV;
> > +
> > + onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
> > + if (!onkey)
> > + return -ENOMEM;
> > +
> > + rv = device_property_read_u32(dev, "linux,code", &onkey->code);
> > + if (rv)
> > + onkey->code = KEY_POWER;
> > +
> > + rv = device_property_read_string(dev, "maxim,onkey-mode", &mode_prop);
> > + if (rv)
> > + mode_prop = "push";
> > +
> > + if (strcmp(mode_prop, "push") == 0)
> > + mode = MAX77650_ONKEY_MODE_PUSH;
> > + else if (strcmp(mode_prop, "slide") == 0)
> > + mode = MAX77650_ONKEY_MODE_SLIDE;
> > + else
> > + return -EINVAL;
> > +
> > + rv = regmap_update_bits(map, MAX77650_REG_CNFG_GLBL,
> > + MAX77650_ONKEY_MODE_MASK, mode);
> > + if (rv)
> > + return rv;
> > +
> > + irq_f = regmap_irq_get_virq(irq_data, MAX77650_INT_nEN_F);
> > + if (irq_f <= 0)
> > + return -EINVAL;
> > +
> > + irq_r = regmap_irq_get_virq(irq_data, MAX77650_INT_nEN_R);
> > + if (irq_r <= 0)
> > + return -EINVAL;
>
> Ugh, it would be better if you handled IRQ mapping in the MFD piece and
> passed it as resources of platform device. Then you'd simply call
> platform_get_irq() here and did not have to reach into parent device for
> "irq_dara".
>
> > +
> > + onkey->input = devm_input_allocate_device(dev);
> > + if (!onkey->input)
> > + return -ENOMEM;
> > +
> > + onkey->input->name = "max77650_onkey";
> > + onkey->input->phys = "max77650_onkey/input0";
> > + onkey->input->id.bustype = BUS_I2C;
> > + onkey->input->dev.parent = dev;
>
> Not needed since devm_input_allocate_device sets parent for you.
>
> > + input_set_capability(onkey->input, EV_KEY, onkey->code);
> > +
> > + rv = devm_request_threaded_irq(dev, irq_f, NULL,
>
> Why threaded interrupt with only hard interrupt handler? If parent
> interrupt is threaded use "any_context_irq" here.
>
Hi Dmitry,
actually it's the other way around. Take a look at the function
prototype for devm_request_threaded_irq()[1].
The third parameter is the hard-irq handler (NULL in my patch), the
fourth is the thread function. Actually even if I did what you're
saying - it would never work as this is a nested irq for which the
hard-irq handler is never called.
For the rest: I'll fix it in v2.
Best regards,
Bartosz Golaszewski
[1] https://elixir.bootlin.com/linux/latest/source/kernel/irq/devres.c#L52
> > + max77650_onkey_falling,
> > + IRQF_ONESHOT, "onkey-down", onkey);
>
> Why do you need oneshot with interrupt that is essentially not threaded?
>
> > + if (rv)
> > + return rv;
> > +
> > + rv = devm_request_threaded_irq(dev, irq_r, NULL,
> > + max77650_onkey_rising,
> > + IRQF_ONESHOT, "onkey-up", onkey);
> > + if (rv)
> > + return rv;
> > +
> > + return input_register_device(onkey->input);
> > +}
> > +
> > +static struct platform_driver max77650_onkey_driver = {
> > + .driver = {
> > + .name = "max77650-onkey",
> > + },
> > + .probe = max77650_onkey_probe,
> > +};
> > +module_platform_driver(max77650_onkey_driver);
> > +
> > +MODULE_DESCRIPTION("MAXIM 77650/77651 ONKEY driver");
> > +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>");
> > +MODULE_LICENSE("GPL");
>
> SPDX header say GPL-2.0 so please "GPL v2" here as "GPL" means v2 and
> later.
>
> Thanks.
>
> --
> Dmitry
