> On Jan 16, 2019, at 16:21, Kai Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> wrote: > > > >> On Jan 14, 2019, at 19:18, Jiri Kosina <jikos@xxxxxxxxxx> wrote: >> >> On Mon, 14 Jan 2019, Kai-Heng Feng wrote: >> >>> A Goodix touchpad doesn't work. Touching the touchpad can trigger IRQ >>> but there's no input event from HID subsystem. >>> >>> Turns out it reports some invalid data: >>> [ 22.136630] i2c_hid i2c-DELL091F:00: input: 0b 00 01 00 00 00 00 00 00 00 00 >>> >>> After some trial and error, it's another device that doesn't work well >>> with ON/SLEEP commands. Disable runtime PM to fix the issue. >> >> Thanks, I've now applied the patch to for-5.0/upstream-fixes. I am >> wondering though we are we seeing these at all - do other OSes not do the >> runtime PM on i2c at all? > > According to the vendor, Windows does use ON/SLEEP, but infrequently. > > We can use pm_runtime_use_autosuspend() to reduce the frequency of > ON/SLEEP commands, but it’s just papering over the touchpad firmware > bug. Goodix says the firmware needs at least 60ms to fully respond ON and SLEEP command. I’ll see if an 200ms autosuspend can solve all Goodix, LG and Raydium touchpanels. Kai-Heng > > Kai-Heng > >> >> -- >> Jiri Kosina >> SUSE Labs