On Fri, 23 Nov 2018, Philippe Schenker wrote: > From: Stefan Agner <stefan@xxxxxxxx> > > This adds the devicetree bindings for the STMPE ADC. > > Signed-off-by: Stefan Agner <stefan@xxxxxxxx> > Signed-off-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx> > Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx> > --- > > Changes in v3: > - Reformatted documentation for touchscreen to use tabs and have a better > overview of the settings. > - Added note which adc-settings will take precedence. > - changed typo in sample-time setting from 144 clocks to 124 clocks, as stated > in the datasheet. > > Changes in v2: > - Moved the bindings for ADC to the overlying mfd. > - Reformatted for better readability > > .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 +++++++ > .../bindings/input/touchscreen/stmpe.txt | 60 ++++++++++++------- > .../devicetree/bindings/mfd/stmpe.txt | 28 ++++++--- > 3 files changed, 80 insertions(+), 29 deletions(-) > create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt [...] > diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt > index c797c05cd3c2..d4408a417193 100644 > --- a/Documentation/devicetree/bindings/mfd/stmpe.txt > +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt > @@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio, > keypad, touchscreen, adc, pwm, rotator. > > Required properties: > - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" > - - reg : I2C/SPI address of the device > + - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" > + - reg : I2C/SPI address of the device Formatting changes should be completed in a separate patch. Here they only serve to obscure the real changes you have made. Please split the formatting changes out and re-submit. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
