[PATCH v2] HID: i2c-hid: Don't reset device upon system resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Raydium touchscreen triggers interrupt storm after system-wide suspend:
[ 179.085033] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete
report (58/65535)

According to Raydium, Windows driver does not reset the device after
system resume.

The HID over I2C spec does specify a reset should be used at
intialization, but it doesn't specify if reset is required for system
suspend.

Tested this patch on other i2c-hid touchpanels I have and those
touchpanels do work after S3 without doing reset. If any regression
happens to other touchpanel vendors, we can use quirk for Raydium
devices.

There's still one device uses I2C_HID_QUIRK_RESEND_REPORT_DESCR so keep
it there.

Cc: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
Cc: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
v2:
 Remove Raydium devices' ID and quirk.
 Rewording.

 drivers/hid/hid-ids.h         |  4 ----
 drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++------
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 7da93d789080..e254ae802688 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -530,10 +530,6 @@
 #define I2C_VENDOR_ID_HANTICK		0x0911
 #define I2C_PRODUCT_ID_HANTICK_5288	0x5288
 
-#define I2C_VENDOR_ID_RAYD		0x2386
-#define I2C_PRODUCT_ID_RAYD_3118	0x3118
-#define I2C_PRODUCT_ID_RAYD_4B33	0x4B33
-
 #define USB_VENDOR_ID_HANWANG		0x0b57
 #define USB_DEVICE_ID_HANWANG_TABLET_FIRST	0x5000
 #define USB_DEVICE_ID_HANWANG_TABLET_LAST	0x8fff
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 57126f6837bb..f3076659361a 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -170,12 +170,8 @@ static const struct i2c_hid_quirks {
 		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
 	{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
 		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
-	{ I2C_VENDOR_ID_RAYD, I2C_PRODUCT_ID_RAYD_3118,
-		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
 	{ USB_VENDOR_ID_SIS_TOUCH, USB_DEVICE_ID_SIS10FB_TOUCH,
 		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
-	{ I2C_VENDOR_ID_RAYD, I2C_PRODUCT_ID_RAYD_4B33,
-		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
 	{ 0, 0 }
 };
 
@@ -1237,11 +1233,16 @@ static int i2c_hid_resume(struct device *dev)
 	pm_runtime_enable(dev);
 
 	enable_irq(client->irq);
-	ret = i2c_hid_hwreset(client);
+
+	/* Instead of resetting device, simply powers the device on. This
+	 * solves "incomplete reports" on Raydium devices 2386:3118 and
+	 * 2386:4B33
+	 */
+	ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
 	if (ret)
 		return ret;
 
-	/* RAYDIUM device (2386:3118) need to re-send report descr cmd
+	/* Some devices need to re-send report descr cmd
 	 * after resume, after this it will be back normal.
 	 * otherwise it issues too many incomplete reports.
 	 */
-- 
2.17.1




[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux