Hello Paweł,
I would suggest dropping sentence punctuation in the patch subject line:
Input: atmel_mxt_ts: Add support for optional regulators.
More below...
On Tue, Jul 31, 2018 at 05:18:09PM +0200, Paweł Chmiel wrote:
> This patch adds optional regulators, which can be used to power
> up touchscreen. After enabling regulators, we need to wait 150msec.
> This value is taken from official driver.
>
> It was tested on Samsung Galaxy i9000 (based on Samsung S5PV210 SOC).
>
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
> ---
> Changes from v2:
> - Move code enabling regulators into separate method,
> to make code more readable.
>
> Changes from v1:
> - Enable regulators only if reset_gpio is present.
> - Switch from devm_regulator_get_optional to devm_regulator_get
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++++++++++++++++++---
> 1 file changed, 59 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 54fe190fd4bc..2cd7f6db6ba9 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -27,6 +27,7 @@
> #include <linux/interrupt.h>
> #include <linux/of.h>
> #include <linux/property.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> #include <linux/gpio/consumer.h>
> #include <linux/property.h>
> @@ -194,10 +195,10 @@ enum t100_type {
>
> /* Delay times */
> #define MXT_BACKUP_TIME 50 /* msec */
> -#define MXT_RESET_GPIO_TIME 20 /* msec */
> #define MXT_RESET_INVALID_CHG 100 /* msec */
> #define MXT_RESET_TIME 200 /* msec */
> #define MXT_RESET_TIMEOUT 3000 /* msec */
> +#define MXT_REGULATOR_DELAY 150 /* msec */
> #define MXT_CRC_TIMEOUT 1000 /* msec */
> #define MXT_FW_RESET_TIME 3000 /* msec */
> #define MXT_FW_CHG_TIMEOUT 300 /* msec */
> @@ -310,6 +311,8 @@ struct mxt_data {
> struct t7_config t7_cfg;
> struct mxt_dbg dbg;
> struct gpio_desc *reset_gpio;
> + struct regulator *vdd_reg;
> + struct regulator *avdd_reg;
>
> /* Cached parameters from object table */
> u16 T5_address;
> @@ -3016,6 +3019,38 @@ static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
> { }
> };
>
> +static int mxt_regulator_enable(struct mxt_data *data)
> +{
> + int error;
> +
> + if (data->reset_gpio) {
> + error = regulator_enable(data->vdd_reg);
> + if (error) {
> + dev_err(&data->client->dev, "Failed to enable vdd regulator: %d\n",
> + error);
> + return error;
> + }
> +
> + error = regulator_enable(data->avdd_reg);
> + if (error) {
> + dev_err(&data->client->dev, "Failed to enable avdd regulator: %d\n",
> + error);
> + return error;
> + }
> +
> + /*
> + * According to maXTouch power sequencing specification, RESET line
Please fix the following checkpatch issue:
drivers/input/touchscreen/atmel_mxt_ts.c:3065: WARNING:LONG_LINE_COMMENT: line over 80 characters
Thanks!
--
Regards,
George
> + * must be kept low until some time after regulators come up to
> + * voltage
> + */
> + msleep(MXT_REGULATOR_DELAY);
> + gpiod_set_value(data->reset_gpio, 1);
> + msleep(MXT_RESET_INVALID_CHG);
> + }
> +
> + return 0;
> +}
> +
> static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
> {
> struct mxt_data *data;
> @@ -3076,6 +3111,22 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
> return error;
> }
>
> + data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
> + if (IS_ERR(data->vdd_reg)) {
> + error = PTR_ERR(data->vdd_reg);
> + dev_err(&client->dev, "Failed to get vdd regulator: %d\n",
> + error);
> + return error;
> + }
> +
> + data->avdd_reg = devm_regulator_get(&client->dev, "avdd");
> + if (IS_ERR(data->avdd_reg)) {
> + error = PTR_ERR(data->avdd_reg);
> + dev_err(&client->dev, "Failed to get avdd regulator: %d\n",
> + error);
> + return error;
> + }
> +
> error = devm_request_threaded_irq(&client->dev, client->irq,
> NULL, mxt_interrupt, IRQF_ONESHOT,
> client->name, data);
> @@ -3086,11 +3137,9 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
>
> disable_irq(client->irq);
>
> - if (data->reset_gpio) {
> - msleep(MXT_RESET_GPIO_TIME);
> - gpiod_set_value(data->reset_gpio, 1);
> - msleep(MXT_RESET_INVALID_CHG);
> - }
> + error = mxt_regulator_enable(data);
> + if (error)
> + return error;
>
> error = mxt_initialize(data);
> if (error)
> @@ -3116,6 +3165,10 @@ static int mxt_remove(struct i2c_client *client)
> struct mxt_data *data = i2c_get_clientdata(client);
>
> disable_irq(data->irq);
> + if (data->reset_gpio) {
> + regulator_disable(data->avdd_reg);
> + regulator_disable(data->vdd_reg);
> + }
> sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
> mxt_free_input_device(data);
> mxt_free_object_table(data);
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
