Hi Matti, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on ljones-mfd/for-mfd-next] [also build test WARNING on v4.18-rc7 next-20180802] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Matti-Vaittinen/mfd-bd71837-mfd-driver-for-ROHM-BD71837-PMIC/20180730-204810 base: https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next smatch warnings: drivers/mfd/rohm-bd718x7.c:163 bd71837_i2c_probe() warn: unsigned 'button.irq' is never less than zero. vim +163 drivers/mfd/rohm-bd718x7.c 88 89 static int bd71837_i2c_probe(struct i2c_client *i2c, 90 const struct i2c_device_id *id) 91 { 92 struct bd71837 *bd71837; 93 int ret, i; 94 unsigned int val; 95 96 bd71837 = devm_kzalloc(&i2c->dev, sizeof(struct bd71837), GFP_KERNEL); 97 98 if (!bd71837) 99 return -ENOMEM; 100 101 bd71837->chip_irq = i2c->irq; 102 103 if (!bd71837->chip_irq) { 104 dev_err(&i2c->dev, "No IRQ configured\n"); 105 return -EINVAL; 106 } 107 108 bd71837->dev = &i2c->dev; 109 dev_set_drvdata(&i2c->dev, bd71837); 110 111 bd71837->regmap = devm_regmap_init_i2c(i2c, &bd71837_regmap_config); 112 if (IS_ERR(bd71837->regmap)) { 113 dev_err(&i2c->dev, "regmap initialization failed\n"); 114 return PTR_ERR(bd71837->regmap); 115 } 116 117 ret = regmap_read(bd71837->regmap, BD71837_REG_REV, &val); 118 if (ret) { 119 dev_err(&i2c->dev, "Read BD71837_REG_DEVICE failed\n"); 120 return ret; 121 } 122 for (i = 0; i < ARRAY_SIZE(supported_revisions); i++) 123 if (supported_revisions[i] == val) 124 break; 125 126 if (i == ARRAY_SIZE(supported_revisions)) { 127 dev_err(&i2c->dev, "Unsupported chip revision\n"); 128 return -ENODEV; 129 } 130 131 ret = devm_regmap_add_irq_chip(&i2c->dev, bd71837->regmap, 132 bd71837->chip_irq, IRQF_ONESHOT, 0, 133 &bd71837_irq_chip, &bd71837->irq_data); 134 if (ret) { 135 dev_err(&i2c->dev, "Failed to add irq_chip\n"); 136 return ret; 137 } 138 139 /* Configure short press to 10 milliseconds */ 140 ret = regmap_update_bits(bd71837->regmap, 141 BD71837_REG_PWRONCONFIG0, 142 BD718XX_PWRBTN_PRESS_DURATION_MASK, 143 BD718XX_PWRBTN_SHORT_PRESS_10MS); 144 if (ret) { 145 dev_err(&i2c->dev, "Failed to configure button short press timeout\n"); 146 return ret; 147 } 148 149 /* Configure long press to 10 seconds */ 150 ret = regmap_update_bits(bd71837->regmap, 151 BD71837_REG_PWRONCONFIG1, 152 BD718XX_PWRBTN_PRESS_DURATION_MASK, 153 BD718XX_PWRBTN_LONG_PRESS_10S); 154 155 if (ret) { 156 dev_err(&i2c->dev, "Failed to configure button long press timeout\n"); 157 return ret; 158 } 159 160 button.irq = regmap_irq_get_virq(bd71837->irq_data, 161 BD71837_INT_PWRBTN_S); 162 > 163 if (button.irq < 0) { 164 dev_err(&i2c->dev, "Failed to get the IRQ\n"); 165 return button.irq; 166 } 167 168 ret = devm_mfd_add_devices(bd71837->dev, PLATFORM_DEVID_AUTO, 169 bd71837_mfd_cells, 170 ARRAY_SIZE(bd71837_mfd_cells), NULL, 0, 171 regmap_irq_get_domain(bd71837->irq_data)); 172 if (ret) 173 dev_err(&i2c->dev, "Failed to create subdevices\n"); 174 175 return ret; 176 } 177 --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
