Hi,
On Thu, Jun 28, 2018 at 08:38:45PM +0530, Vinod Koul wrote:
> The Power On device for Qcom PM 8xxx is a MFD supporting pwrkey and
> resin along with the Android reboot-mode.
>
> Add the binding describing this.
>
> Suggested-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
Thanks, queued to power-supply-next.
-- Sebastian
> .../devicetree/bindings/power/reset/qcom,pon.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
>
> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> new file mode 100644
> index 000000000000..f32cdd358267
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
> @@ -0,0 +1,35 @@
> +Qualcomm PON Device
> +
> +The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
> +along with the Android reboot-mode.
> +
> +This DT node has pwrkey as sub node.
> +
> +Required Properties:
> +-compatible: "qcom,pm8916-pon"
> +-reg: Specifies the physical address of the pon register
> +
> +Optional subnode:
> +-pwrkey: Specifies the subnode pwrkey and should follow the
> + qcom,pm8941-pwrkey.txt description.
> +
> +The rest of the properties should follow the generic reboot-mode description
> +found in reboot-mode.txt
> +
> +Example:
> +
> + pon@800 {
> + compatible = "qcom,pm8916-pon";
> +
> + reg = <0x800>;
> + mode-bootloader = <0x2>;
> + mode-recovery = <0x1>;
> +
> + pwrkey {
> + compatible = "qcom,pm8941-pwrkey";
> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_POWER>;
> + };
> + };
> --
> 2.14.4
>
Attachment:
signature.asc
Description: PGP signature
