Since handling is abstracted in this driver, we need to add resin entry
in id table along with pwrkey_data.
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
drivers/input/misc/pm8941-pwrkey.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index aedb6ea2b50a..913405404a92 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -29,6 +29,7 @@
#define PON_RT_STS 0x10
#define PON_KPDPWR_N_SET BIT(0)
+#define PON_RESIN_N_SET BIT(1)
#define PON_PS_HOLD_RST_CTL 0x5a
#define PON_PS_HOLD_RST_CTL2 0x5b
@@ -39,6 +40,7 @@
#define PON_PULL_CTL 0x70
#define PON_KPDPWR_PULL_UP BIT(1)
+#define PON_RESIN_PULL_UP BIT(0)
#define PON_DBC_CTL 0x71
#define PON_DBC_DELAY_MASK 0x7
@@ -307,8 +309,14 @@ static const struct pm8941_data pwrkey_data = {
.status_bit = PON_KPDPWR_N_SET,
};
+static const struct pm8941_data resin_data = {
+ .pull_up_bit = PON_RESIN_PULL_UP,
+ .status_bit = PON_RESIN_N_SET,
+};
+
static const struct of_device_id pm8941_pwr_key_id_table[] = {
{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
+ { .compatible = "qcom,pm8941-resin", .data = &resin_data },
{ }
};
MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
--
2.14.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
