ROHM BD71837 PMIC MFD driver providing interrupts and support for two subsystems: - clk - Regulators Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> --- drivers/mfd/Kconfig | 13 ++ drivers/mfd/Makefile | 1 + drivers/mfd/bd71837.c | 249 ++++++++++++++++++++++++++++++++++++++ include/linux/mfd/bd71837.h | 288 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 551 insertions(+) create mode 100644 drivers/mfd/bd71837.c create mode 100644 include/linux/mfd/bd71837.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b860eb5aa194..7aa05fc9ed8e 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1787,6 +1787,19 @@ config MFD_STW481X in various ST Microelectronics and ST-Ericsson embedded Nomadik series. +config MFD_BD71837 + bool "BD71837 Power Management chip" + depends on I2C=y + depends on OF + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + Select this option to get support for the ROHM BD71837 + Power Management chips. BD71837 is designed to power processors like + NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring + and emergency shut down as well as 32,768KHz clock output. + config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" depends on (ARCH_STM32 && OF) || COMPILE_TEST diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index e9fd20dba18d..09dc9eb3782c 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -227,4 +227,5 @@ obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o +obj-$(CONFIG_MFD_BD71837) += bd71837.o diff --git a/drivers/mfd/bd71837.c b/drivers/mfd/bd71837.c new file mode 100644 index 000000000000..114be66f0a25 --- /dev/null +++ b/drivers/mfd/bd71837.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 ROHM Semiconductors +// bd71837.c -- ROHM BD71837MWV mfd driver +// +// Datasheet available from +// https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/gpio.h> +#include <linux/regmap.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/mfd/core.h> +#include <linux/mfd/bd71837.h> + +static const struct resource irqs[] = { + { + .start = BD71837_INT_PWRBTN, + .end = BD71837_INT_PWRBTN, + .flags = IORESOURCE_IRQ, + .name = "pwr-btn", + }, { + .start = BD71837_INT_PWRBTN_L, + .end = BD71837_INT_PWRBTN_L, + .flags = IORESOURCE_IRQ, + .name = "pwr-btn-l", + }, { + .start = BD71837_INT_PWRBTN_S, + .end = BD71837_INT_PWRBTN_S, + .flags = IORESOURCE_IRQ, + .name = "pwr-btn-s", + }, +}; + +/* bd71837 multi function cells */ +static struct mfd_cell bd71837_mfd_cells[] = { + { + .name = "bd71837-clk", + }, { + .name = "bd718xx-pwrkey", + .resources = &irqs[0], + .num_resources = ARRAY_SIZE(irqs), + }, { + .name = "bd71837-pmic", + }, +}; + +static const struct regmap_irq bd71837_irqs[] = { + REGMAP_IRQ_REG(BD71837_INT_SWRST, 0, BD71837_INT_SWRST_MASK), + REGMAP_IRQ_REG(BD71837_INT_PWRBTN_S, 0, BD71837_INT_PWRBTN_S_MASK), + REGMAP_IRQ_REG(BD71837_INT_PWRBTN_L, 0, BD71837_INT_PWRBTN_L_MASK), + REGMAP_IRQ_REG(BD71837_INT_PWRBTN, 0, BD71837_INT_PWRBTN_MASK), + REGMAP_IRQ_REG(BD71837_INT_WDOG, 0, BD71837_INT_WDOG_MASK), + REGMAP_IRQ_REG(BD71837_INT_ON_REQ, 0, BD71837_INT_ON_REQ_MASK), + REGMAP_IRQ_REG(BD71837_INT_STBY_REQ, 0, BD71837_INT_STBY_REQ_MASK), +}; + +static struct regmap_irq_chip bd71837_irq_chip = { + .name = "bd71837-irq", + .irqs = bd71837_irqs, + .num_irqs = ARRAY_SIZE(bd71837_irqs), + .num_regs = 1, + .irq_reg_stride = 1, + .status_base = BD71837_REG_IRQ, + .mask_base = BD71837_REG_MIRQ, + .ack_base = BD71837_REG_IRQ, + .init_ack_masked = true, + .mask_invert = false, +}; + +static int bd71837_irq_exit(struct bd71837 *bd71837) +{ + if (bd71837->chip_irq > 0) + regmap_del_irq_chip(bd71837->chip_irq, bd71837->irq_data); + return 0; +} + +static const struct regmap_range pmic_status_range = { + .range_min = BD71837_REG_IRQ, + .range_max = BD71837_REG_POW_STATE, +}; + +static const struct regmap_access_table volatile_regs = { + .yes_ranges = &pmic_status_range, + .n_yes_ranges = 1, +}; + +static const struct regmap_config bd71837_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &volatile_regs, + .max_register = BD71837_MAX_REGISTER - 1, + .cache_type = REGCACHE_RBTREE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id bd71837_of_match[] = { + { .compatible = "rohm,bd71837", .data = (void *)0}, + { }, +}; +MODULE_DEVICE_TABLE(of, bd71837_of_match); + +static int bd71837_parse_dt(struct i2c_client *client, struct bd71837_board **b) +{ + struct device_node *np = client->dev.of_node; + struct bd71837_board *board_info; + unsigned int prop; + int r; + int rv = -ENOMEM; + + board_info = devm_kzalloc(&client->dev, sizeof(*board_info), + GFP_KERNEL); + if (!board_info) + goto err_out; + + if (client->irq) { + dev_dbg(&client->dev, "Got irq %d\n", client->irq); + board_info->gpio_intr = client->irq; + } else { + dev_err(&client->dev, "no pmic intr pin available\n"); + rv = -ENOENT; + goto err_intr; + } + r = of_property_read_u32(np, "irq_base", &prop); + if (!r) + board_info->irq_base = prop; + else + board_info->irq_base = 0; + + rv = 0; + *b = board_info; + if (0) { +err_intr: + devm_kfree(&client->dev, board_info); +err_out: + dev_err(&client->dev, "failed to parse device-tree (%d)\n", rv); + } + return rv; +} +#endif //CONFIG_OF + +static int bd71837_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct bd71837 *bd71837; + struct bd71837_board *pmic_plat_data; + int ret = -EINVAL; + + pmic_plat_data = dev_get_platdata(&i2c->dev); + + if (!pmic_plat_data && i2c->dev.of_node) + ret = bd71837_parse_dt(i2c, &pmic_plat_data); + + if (!pmic_plat_data) + return ret; + + bd71837 = devm_kzalloc(&i2c->dev, sizeof(struct bd71837), GFP_KERNEL); + if (bd71837 == NULL) + return -ENOMEM; + + bd71837->of_plat_data = pmic_plat_data; + i2c_set_clientdata(i2c, bd71837); + bd71837->dev = &i2c->dev; + bd71837->i2c_client = i2c; + bd71837->chip_irq = pmic_plat_data->gpio_intr; + + bd71837->regmap = devm_regmap_init_i2c(i2c, &bd71837_regmap_config); + if (IS_ERR(bd71837->regmap)) { + ret = PTR_ERR(bd71837->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + goto err_out; + } + + ret = bd71837_reg_read(bd71837, BD71837_REG_REV); + if (ret < 0) { + dev_err(bd71837->dev, + "%s(): Read BD71837_REG_DEVICE failed!\n", __func__); + goto err_out; + } + + ret = regmap_add_irq_chip(bd71837->regmap, bd71837->chip_irq, + IRQF_ONESHOT, 0, + &bd71837_irq_chip, &bd71837->irq_data); + if (ret < 0) { + dev_err(bd71837->dev, "Failed to add irq_chip %d\n", ret); + goto err_out; + } + + ret = mfd_add_devices(bd71837->dev, PLATFORM_DEVID_AUTO, + bd71837_mfd_cells, ARRAY_SIZE(bd71837_mfd_cells), + NULL, 0, + regmap_irq_get_domain(bd71837->irq_data)); + if (ret) + regmap_del_irq_chip(bd71837->chip_irq, bd71837->irq_data); +err_out: + + return ret; +} + +static int bd71837_i2c_remove(struct i2c_client *i2c) +{ + struct bd71837 *bd71837 = i2c_get_clientdata(i2c); + + bd71837_irq_exit(bd71837); + mfd_remove_devices(bd71837->dev); + + return 0; +} + +static const struct i2c_device_id bd71837_i2c_id[] = { + { .name = "bd71837", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bd71837_i2c_id); + +static struct i2c_driver bd71837_i2c_driver = { + .driver = { + .name = "bd71837-mfd", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(bd71837_of_match), + }, + .probe = bd71837_i2c_probe, + .remove = bd71837_i2c_remove, + .id_table = bd71837_i2c_id, +}; + +static int __init bd71837_i2c_init(void) +{ + return i2c_add_driver(&bd71837_i2c_driver); +} +/* init early so consumer devices can complete system boot */ +subsys_initcall(bd71837_i2c_init); + +static void __exit bd71837_i2c_exit(void) +{ + i2c_del_driver(&bd71837_i2c_driver); +} +module_exit(bd71837_i2c_exit); + +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("BD71837 chip multi-function driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/bd71837.h b/include/linux/mfd/bd71837.h new file mode 100644 index 000000000000..641b7dba3076 --- /dev/null +++ b/include/linux/mfd/bd71837.h @@ -0,0 +1,288 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2018 ROHM Semiconductors */ + +/* + * ROHM BD71837MWV header file + */ + +#ifndef __LINUX_MFD_BD71837_H__ +#define __LINUX_MFD_BD71837_H__ + +#include <linux/regmap.h> + +enum { + BD71837_BUCK1 = 0, + BD71837_BUCK2, + BD71837_BUCK3, + BD71837_BUCK4, + BD71837_BUCK5, + BD71837_BUCK6, + BD71837_BUCK7, + BD71837_BUCK8, + BD71837_LDO1, + BD71837_LDO2, + BD71837_LDO3, + BD71837_LDO4, + BD71837_LDO5, + BD71837_LDO6, + BD71837_LDO7, + BD71837_REGULATOR_CNT, +}; + +#define BD71837_BUCK1_VOLTAGE_NUM 0x40 +#define BD71837_BUCK2_VOLTAGE_NUM 0x40 +#define BD71837_BUCK3_VOLTAGE_NUM 0x40 +#define BD71837_BUCK4_VOLTAGE_NUM 0x40 + +#define BD71837_BUCK5_VOLTAGE_NUM 0x08 +#define BD71837_BUCK6_VOLTAGE_NUM 0x04 +#define BD71837_BUCK7_VOLTAGE_NUM 0x08 +#define BD71837_BUCK8_VOLTAGE_NUM 0x40 + +#define BD71837_LDO1_VOLTAGE_NUM 0x04 +#define BD71837_LDO2_VOLTAGE_NUM 0x02 +#define BD71837_LDO3_VOLTAGE_NUM 0x10 +#define BD71837_LDO4_VOLTAGE_NUM 0x10 +#define BD71837_LDO5_VOLTAGE_NUM 0x10 +#define BD71837_LDO6_VOLTAGE_NUM 0x10 +#define BD71837_LDO7_VOLTAGE_NUM 0x10 + +enum { + BD71837_REG_REV = 0x00, + BD71837_REG_SWRESET = 0x01, + BD71837_REG_I2C_DEV = 0x02, + BD71837_REG_PWRCTRL0 = 0x03, + BD71837_REG_PWRCTRL1 = 0x04, + BD71837_REG_BUCK1_CTRL = 0x05, + BD71837_REG_BUCK2_CTRL = 0x06, + BD71837_REG_BUCK3_CTRL = 0x07, + BD71837_REG_BUCK4_CTRL = 0x08, + BD71837_REG_BUCK5_CTRL = 0x09, + BD71837_REG_BUCK6_CTRL = 0x0A, + BD71837_REG_BUCK7_CTRL = 0x0B, + BD71837_REG_BUCK8_CTRL = 0x0C, + BD71837_REG_BUCK1_VOLT_RUN = 0x0D, + BD71837_REG_BUCK1_VOLT_IDLE = 0x0E, + BD71837_REG_BUCK1_VOLT_SUSP = 0x0F, + BD71837_REG_BUCK2_VOLT_RUN = 0x10, + BD71837_REG_BUCK2_VOLT_IDLE = 0x11, + BD71837_REG_BUCK3_VOLT_RUN = 0x12, + BD71837_REG_BUCK4_VOLT_RUN = 0x13, + BD71837_REG_BUCK5_VOLT = 0x14, + BD71837_REG_BUCK6_VOLT = 0x15, + BD71837_REG_BUCK7_VOLT = 0x16, + BD71837_REG_BUCK8_VOLT = 0x17, + BD71837_REG_LDO1_VOLT = 0x18, + BD71837_REG_LDO2_VOLT = 0x19, + BD71837_REG_LDO3_VOLT = 0x1A, + BD71837_REG_LDO4_VOLT = 0x1B, + BD71837_REG_LDO5_VOLT = 0x1C, + BD71837_REG_LDO6_VOLT = 0x1D, + BD71837_REG_LDO7_VOLT = 0x1E, + BD71837_REG_TRANS_COND0 = 0x1F, + BD71837_REG_TRANS_COND1 = 0x20, + BD71837_REG_VRFAULTEN = 0x21, + BD71837_REG_MVRFLTMASK0 = 0x22, + BD71837_REG_MVRFLTMASK1 = 0x23, + BD71837_REG_MVRFLTMASK2 = 0x24, + BD71837_REG_RCVCFG = 0x25, + BD71837_REG_RCVNUM = 0x26, + BD71837_REG_PWRONCONFIG0 = 0x27, + BD71837_REG_PWRONCONFIG1 = 0x28, + BD71837_REG_RESETSRC = 0x29, + BD71837_REG_MIRQ = 0x2A, + BD71837_REG_IRQ = 0x2B, + BD71837_REG_IN_MON = 0x2C, + BD71837_REG_POW_STATE = 0x2D, + BD71837_REG_OUT32K = 0x2E, + BD71837_REG_REGLOCK = 0x2F, + BD71837_REG_OTPVER = 0xFF, + BD71837_MAX_REGISTER = 0x100, +}; + +#define REGLOCK_PWRSEQ 0x1 +#define REGLOCK_VREG 0x10 + +/* Generic BUCK control masks */ +#define BD71837_BUCK_SEL 0x02 +#define BD71837_BUCK_EN 0x01 +#define BD71837_BUCK_RUN_ON 0x04 + +/* Generic LDO masks */ +#define BD71837_LDO_SEL 0x80 +#define BD71837_LDO_EN 0x40 + +/* BD71837 BUCK ramp rate CTRL reg bits */ +#define BUCK_RAMPRATE_MASK 0xC0 +#define BUCK_RAMPRATE_10P00MV 0x0 +#define BUCK_RAMPRATE_5P00MV 0x1 +#define BUCK_RAMPRATE_2P50MV 0x2 +#define BUCK_RAMPRATE_1P25MV 0x3 + +/* BD71837_REG_BUCK1_VOLT_RUN bits */ +#define BUCK1_RUN_MASK 0x3F +#define BUCK1_RUN_DEFAULT 0x14 + +/* BD71837_REG_BUCK1_VOLT_SUSP bits */ +#define BUCK1_SUSP_MASK 0x3F +#define BUCK1_SUSP_DEFAULT 0x14 + +/* BD71837_REG_BUCK1_VOLT_IDLE bits */ +#define BUCK1_IDLE_MASK 0x3F +#define BUCK1_IDLE_DEFAULT 0x14 + +/* BD71837_REG_BUCK2_VOLT_RUN bits */ +#define BUCK2_RUN_MASK 0x3F +#define BUCK2_RUN_DEFAULT 0x1E + +/* BD71837_REG_BUCK2_VOLT_IDLE bits */ +#define BUCK2_IDLE_MASK 0x3F +#define BUCK2_IDLE_DEFAULT 0x14 + +/* BD71837_REG_BUCK3_VOLT_RUN bits */ +#define BUCK3_RUN_MASK 0x3F +#define BUCK3_RUN_DEFAULT 0x1E + +/* BD71837_REG_BUCK4_VOLT_RUN bits */ +#define BUCK4_RUN_MASK 0x3F +#define BUCK4_RUN_DEFAULT 0x1E + +/* BD71837_REG_BUCK5_VOLT bits */ +#define BUCK5_MASK 0x07 +#define BUCK5_DEFAULT 0x02 + +/* BD71837_REG_BUCK6_VOLT bits */ +#define BUCK6_MASK 0x03 +#define BUCK6_DEFAULT 0x03 + +/* BD71837_REG_BUCK7_VOLT bits */ +#define BUCK7_MASK 0x07 +#define BUCK7_DEFAULT 0x03 + +/* BD71837_REG_BUCK8_VOLT bits */ +#define BUCK8_MASK 0x3F +#define BUCK8_DEFAULT 0x1E + +/* BD71837_REG_IRQ bits */ +#define IRQ_SWRST 0x40 +#define IRQ_PWRON_S 0x20 +#define IRQ_PWRON_L 0x10 +#define IRQ_PWRON 0x08 +#define IRQ_WDOG 0x04 +#define IRQ_ON_REQ 0x02 +#define IRQ_STBY_REQ 0x01 + +/* BD71837_REG_OUT32K bits */ +#define BD71837_OUT32K_EN 0x01 + +/* BD71837 gated clock rate */ +#define BD71837_CLK_RATE 32768 + +/* BD71837 irqs */ +enum { + BD71837_INT_STBY_REQ, + BD71837_INT_ON_REQ, + BD71837_INT_WDOG, + BD71837_INT_PWRBTN, + BD71837_INT_PWRBTN_L, + BD71837_INT_PWRBTN_S, + BD71837_INT_SWRST +}; + +/* BD71837 interrupt masks */ +#define BD71837_INT_SWRST_MASK 0x40 +#define BD71837_INT_PWRBTN_S_MASK 0x20 +#define BD71837_INT_PWRBTN_L_MASK 0x10 +#define BD71837_INT_PWRBTN_MASK 0x8 +#define BD71837_INT_WDOG_MASK 0x4 +#define BD71837_INT_ON_REQ_MASK 0x2 +#define BD71837_INT_STBY_REQ_MASK 0x1 + +/* BD71837_REG_LDO1_VOLT bits */ +#define LDO1_MASK 0x03 + +/* BD71837_REG_LDO1_VOLT bits */ +#define LDO2_MASK 0x20 + +/* BD71837_REG_LDO3_VOLT bits */ +#define LDO3_MASK 0x0F + +/* BD71837_REG_LDO4_VOLT bits */ +#define LDO4_MASK 0x0F + +/* BD71837_REG_LDO5_VOLT bits */ +#define LDO5_MASK 0x0F + +/* BD71837_REG_LDO6_VOLT bits */ +#define LDO6_MASK 0x0F + +/* BD71837_REG_LDO7_VOLT bits */ +#define LDO7_MASK 0x0F + +struct bd71837; +struct bd71837_pmic; +struct bd71837_clk; + +/* + * Board platform data may be used to initialize regulators. + */ + +struct bd71837_board { + struct regulator_init_data *init_data[BD71837_REGULATOR_CNT]; + int gpio_intr; + int irq_base; +}; + +struct bd71837 { + struct device *dev; + struct i2c_client *i2c_client; + struct regmap *regmap; + unsigned long int id; + + int chip_irq; + struct regmap_irq_chip_data *irq_data; + + struct bd71837_pmic *pmic; + struct bd71837_clk *clk; + + struct bd71837_board *of_plat_data; +}; + +/* + * bd71837 sub-driver chip access routines + */ + +static inline int bd71837_reg_read(struct bd71837 *bd71837, u8 reg) +{ + int r, val; + + r = regmap_read(bd71837->regmap, reg, &val); + if (r < 0) + return r; + return val; +} + +static inline int bd71837_reg_write(struct bd71837 *bd71837, u8 reg, + unsigned int val) +{ + return regmap_write(bd71837->regmap, reg, val); +} + +static inline int bd71837_set_bits(struct bd71837 *bd71837, u8 reg, u8 mask) +{ + return regmap_update_bits(bd71837->regmap, reg, mask, mask); +} + +static inline int bd71837_clear_bits(struct bd71837 *bd71837, u8 reg, + u8 mask) +{ + return regmap_update_bits(bd71837->regmap, reg, mask, 0); +} + +static inline int bd71837_update_bits(struct bd71837 *bd71837, u8 reg, + u8 mask, u8 val) +{ + return regmap_update_bits(bd71837->regmap, reg, mask, val); +} + +#endif /* __LINUX_MFD_BD71837_H__ */ -- 2.14.3 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
