Re: [PATCH 1/2] HID: multitouch: report MT_TOOL_PALM for non-confident touches

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 04, 2018 at 02:32:55PM -0700, Dmitry Torokhov wrote:
> On Mon, Jun 04, 2018 at 10:59:16PM +0200, Benjamin Tissoires wrote:
> > On Mon, Jun 4, 2018 at 8:26 PM, Dmitry Torokhov
> > <dmitry.torokhov@xxxxxxxxx> wrote:
> > > On Mon, Jun 04, 2018 at 07:55:57PM +0200, Henrik Rydberg wrote:
> > >> Hi Dmitry,
> > >>
> > >> > > > Logically, the confidence state is a property of a contact, not a new type
> > >> > > > of contact. Trying to use it in any other way is bound to lead to confusion.
> > >> > > >
> > >> > > > Problem is that MT_TOOL_PALM has been introduced in the kernel since
> > >> > > > v4.0 (late 2015 by a736775db683 "Input: add MT_TOOL_PALM").
> > >> > > > It's been used in the Synaptics RMI4 driver since and by hid-asus in late 2016.
> > >> > > > I can't find any other users in the current upstream tree, but those
> > >> > > > two are already making a precedent and changing the semantic is a
> > >> > > > little bit late :/
> > >> > I am sorry I did not respond and lost track of this issue back then, but
> > >> > I disagree with Henrik here. While confidence is a property of contact,
> > >> > so is the type of contact and it can and will change throughout life of
> > >> > a contact, especially if we will continue adding new types, such as, for
> > >> > example, thumb. In this case the firmware can transition through
> > >> > finger->thumb or finger->thumb->palm or finger->palm as the nature of
> > >> > contact becomes better understood. Still it is the same contact and we
> > >> > should not attempt to signal userspace differently.
> > >> We agree that the contact should stay the same, but the fear, and I think
> > >> somewhere along the blurry history of this thread, the problem was that
> > >> userspace interpreted the property change as a new contact (lift up/double
> > >> click/etc). Finger/thumb/palm is one set of hand properties, but what about
> > >> Pen? It would be hard for an application to consider a switch from finger to
> > >> pen as the same contact, which is where the natural implementation starts to
> > >> diverge from the intention.
> > >
> > > I think the userspace has to trust our tracking ID to decide whether it
> > > is a same contact or not. The current issue is that kernel is forcing
> > > tracking ID change on tool type change, and one of the 2 patches that I
> > > posted fixed that, allowing us to keep the tracking ID for finger->palm
> > > transitions.
> > 
> > I think I missed those 2 patches, can you point a LKML link?
> 
> Sorry, I thought I sent it out with the patch we are talking about here,
> but I did not. See below. Note that it doe snot have any protections on
> finger->pen transitions and I am not sure any are needed at the moment.
> We can add them wither to MT core or to drivers if we see issues with
> devices.
> 
> > Also, note that libevdev discards the tracking ID change now (it
> > shouts at the user in the logs). So that means that it will now be
> > hard to force libevdev to trust the kernel again for the tracking ID.
> > The current rule is:
> > - tracking ID >= 0 -> new touch
> > - any subsequent tracking ID >= 0 -> discarded
> > - tracking ID == -1 -> end of touch
> 
> Well, I guess it is like synaptics driver that used to dump core
> whenever it saw tracking ID change for the same slot (not going though
> -1 sequence). It only mattered to Synaptics PS/2 having only 2 slots and
> us having to produce weird results when users would use fancy gestures
> with 3+ fingers.

yeah, my mistake, sorry. I always assumed a transition from M to -1 to N,
never M to N. This assumption made its way into libevdev (where the tracking
ID is transparently discarded, albeit with a warning). There are libevdev
patches to get rid of that but whatever device needed it got fixed in some
other way, so the patch didn't get pushed.

fwiw, dump core was just "print the backtrace to the log" here, there was no
actual core dump.

> It probably does not matter with devices with 5+ slots. We should pretty
> much always have free slot for new contact.
> 
> > 
> > >
> > > I think it is kernel task to not signal transitions that do not make
> > > sense, such as finger->pen or palm->pen etc.
> > 
> > I fully agree, though there is currently no such guard in the kernel
> > (maybe it's part of your series). I am worried about the RMI4 F12
> > driver that automatically forward the info from the firmware, so if
> > the firmware does something crazy, it will be exported to user space.
> > But I guess it might be better to treat that on a per driver basis.
> 
> Yeah, I think so.
> 
> > 
> > >
> > >>
> > >> > We could introduce the ABS_MT_CONFIDENCE (0/1 or even 0..n range), to
> > >> > complement ABS_MT_TOOL, but that would not really solve the issue with
> > >> > Wacom firmware (declaring contact non-confident and releasing it right
> > >> > away) and given MS explanation of the confidence as "contact is too big"
> > >> > MT_TOOL_PALM fits it perfectly.
> > >> Indeed, the Wacom firmware seems to need some special handling, which should
> > >> be fine by everyone. I do think it would make sense to add
> > >> ABS_MT_TOOL_TOO_BIG, or something, and use it if it exists. This would apply
> > 
> > Except we are already running out of ABS_* axes.
> 
> Sorry, meants MT_TOOL_TO_BIG, not a new axis.

bikeshed: MT_TOOL_IGNORE is a more generic name and does not imply size. A
pen that's lying on its side doesn't have a size but should still be
ignored.

> > 
> > >> also to a pen lying down on a touchpad, for instance.
> > >
> > > OK, I can see that for Pens, if we have firmware that would recognize
> > > such condition, it would be weird to report PALM. We could indeed have
> > > ABS_MT_TOOL_TOO_BIG, but on the other hand it is still a pen (as long as
> > > the hardware can recognize it as such). Maybe we'd be better off just
> > > having userspace going by contact size for pens. Peter, any suggestions
> > > here?
> > 
> > I don't think we have size handling in the tablet implementation in
> > libinput. I do not see it as a big issue to add such axes from a
> > libinput point of view. However, there is no existing hardware that
> > would provide such information, so I guess this will be a 'no' until
> > actual hardware comes in.

correct on all counts :)


> > Also note that the MT_TOOL_PEN implementation is limited (even
> > non-existant if I remember correctly). Peter and I do not have access
> > to any device that support such multi pen, so AFAICT, there is no code
> > to handle this in libinput.

Yep, correct. On this note: libinput very much follows a "no hardware, no
implementation" rule. I played the game of trying to support everything in a
generic manner with the X drivers and it's a nightmare to maintain. libinput
instead takes a use case and tries to make it sensible - but for that to
work we need to know both the hardware and the use-cases. That's why tablet
handling coming out of libinput is very different to the handling we have in
X but, afaict, everyone is better off for it so far.

This means that if you give me a MT_TOOL_FINGER → MT_TOOL_PEN transition,
I'll handle it, but only after you also give me the use-case for it and the
promise of real devices that need it. 

> > One last point from libinput, the pen device would need to be on its
> > separate kernel node for the protocol to be smoothly handled. So
> > basically, even the transition from MT_TOOL_FINGER to MT_TOOL_PEN
> > would not be handled properly right now. The Pen event will be treated
> > as a touch.
> 
> I think normally pen and touch a separate controllers, so we have that
> going for us...

Side-effect of this is: the tablet interface doesn't handle touch at all
because it didn't need to yet. So while technically possible, it requires a
fair bit of re-arranging.

> Input: do not assign new tracking ID when changing tool type
> 
> From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> 
> We allow changing tool type (from MT_TOOL_FINGER to MT_TOOL_PALM) so we
> should not be forcing new tracking ID for the slot.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>

Reviewed-by: Peter Hutterer <peter.hutterer@xxxxxxxxx>

Cheers,
   Peter

> ---
>  drivers/input/input-mt.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
> index a1bbec9cda8d4..7ca4b318ed419 100644
> --- a/drivers/input/input-mt.c
> +++ b/drivers/input/input-mt.c
> @@ -151,7 +151,7 @@ void input_mt_report_slot_state(struct input_dev *dev,
>  	}
>  
>  	id = input_mt_get_value(slot, ABS_MT_TRACKING_ID);
> -	if (id < 0 || input_mt_get_value(slot, ABS_MT_TOOL_TYPE) != tool_type)
> +	if (id < 0)
>  		id = input_mt_new_trkid(mt);
>  
>  	input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id);
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux