On Mon, May 07, 2018 at 03:18:23PM +0200, Philipp Puschmann wrote:
> The driver supports at least the ili2511 chipset but may support other
> Ilitek chipsets using Ilitek i2c protocol v3.x.
>
> The tested ili2511-based touchscreen delivers garbage for more than 6
> fingers while it should support up to 10 fingers. The reason is still
> unclear and this remains a FIXME in the driver for now.
>
> The usage of pressure is optional. Touchscreens may deliver constant
> and so useless pressure data.
>
> Signed-off-by: Philipp Puschmann <pp@xxxxxxxxx>
> ---
> .../bindings/input/touchscreen/ili251x.txt | 35 ++
Please make the binding a separate patch.
> drivers/input/touchscreen/Kconfig | 12 +
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/ili251x.c | 350 ++++++++++++++++++
> 4 files changed, 398 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ili251x.txt
> create mode 100644 drivers/input/touchscreen/ili251x.c
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ili251x.txt b/Documentation/devicetree/bindings/input/touchscreen/ili251x.txt
> new file mode 100644
> index 000000000000..f21ad93d3bdd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/ili251x.txt
> @@ -0,0 +1,35 @@
> +Ilitek ili251x touchscreen driver
Bindings are not drivers.
> +
> +This driver uses protocol version 3 and should be compatible with other
> +Ilitek touch controllers that use protocol 3.x
> +
> +Required properties:
> + - compatible: "ili251x"
Needs a vendor prefix.
Don't use wildcards in compatible strings. Maybe you want to incorporate
the protocol version into the compatible string.
> + - reg: I2C slave address of the chip (0x41)
> + - interrupt-parent: a phandle pointing to the interrupt controller
> + serving the interrupt for this chip
> + - interrupts: interrupt specification for the touchdetect
> + interrupt
> +
> +Optional properties:
> + - reset-gpios: GPIO specification for the RESET input
> +
> + - pinctrl-names: should be "default"
> + - pinctrl-0: a phandle pointing to the pin settings for the
> + control gpios
> + - max-fingers: the maximum number of fingers to handle
We already have 'silead,max-fingers', so probably time for a common
property.
> + - pressure: support pressure data
This should be implied by the compatible string.
> + - generic options : See touchscreen.txt
> +
> +Example:
> +
> + ili251x@41 {
touchscreen@41
> + compatible = "ili251x";
> + reg = <0x41>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_touchpanel>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
> + reset-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
> + max-fingers = <6>;
> + };
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
