From: Xiaotong Lu <xiaotong.lu@xxxxxxxxxxxxxx>
This patch adds the Spreadtrum vibrator driver, which embedded in the
Spreadtrum SC27xx series PMICs.
Signed-off-by: Xiaotong Lu <xiaotong.lu@xxxxxxxxxxxxxx>
Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
---
drivers/input/misc/Kconfig | 10 +++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/sc27xx-vibra.c | 159 +++++++++++++++++++++++++++++++++++++
3 files changed, 170 insertions(+)
create mode 100644 drivers/input/misc/sc27xx-vibra.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 572b15f..c761c0c 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON
To compile this driver as a module, choose M here: the
module will be called rave-sp-pwrbutton.
+config INPUT_SC27XX_VIBRA
+ tristate "Spreadtrum sc27xx vibrator support"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for Spreadtrum sc27xx vibrator driver.
+
+ To compile this driver as a module, choose M here. The module will
+ be called sc27xx_vibra.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 72cde28..9d0f9d1 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
+obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
diff --git a/drivers/input/misc/sc27xx-vibra.c b/drivers/input/misc/sc27xx-vibra.c
new file mode 100644
index 0000000..a34a315
--- /dev/null
+++ b/drivers/input/misc/sc27xx-vibra.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+#define CUR_DRV_CAL_SEL GENMASK(13, 12)
+#define SLP_LDOVIBR_PD_EN BIT(9)
+#define LDO_VIBR_PD BIT(8)
+
+struct vibra_info {
+ struct input_dev *input_dev;
+ struct work_struct play_work;
+ struct regmap *regmap;
+ u32 base;
+ u32 strength;
+ bool enabled;
+};
+
+static void sc27xx_vibra_set(struct vibra_info *info, bool on)
+{
+ if (on) {
+ regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0);
+ regmap_update_bits(info->regmap, info->base,
+ SLP_LDOVIBR_PD_EN, 0);
+ info->enabled = true;
+ } else {
+ regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD,
+ LDO_VIBR_PD);
+ regmap_update_bits(info->regmap, info->base,
+ SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN);
+ info->enabled = false;
+ }
+}
+
+static int sc27xx_vibra_hw_init(struct vibra_info *info)
+{
+ return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0);
+}
+
+static void sc27xx_vibra_play_work(struct work_struct *work)
+{
+ struct vibra_info *info = container_of(work, struct vibra_info,
+ play_work);
+
+ if (info->strength && !info->enabled)
+ sc27xx_vibra_set(info, true);
+ else if (info->enabled)
+ sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_play(struct input_dev *input, void *data,
+ struct ff_effect *effect)
+{
+ struct vibra_info *info = input_get_drvdata(input);
+
+ info->strength = effect->u.rumble.weak_magnitude;
+ schedule_work(&info->play_work);
+
+ return 0;
+}
+
+static void sc27xx_vibra_close(struct input_dev *input)
+{
+ struct vibra_info *info = input_get_drvdata(input);
+
+ cancel_work_sync(&info->play_work);
+ if (info->enabled)
+ sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct vibra_info *info;
+ int ret;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!info->regmap) {
+ dev_err(&pdev->dev, "failed to get vibrator regmap.\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(node, "reg", &info->base);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get vibrator base address.\n");
+ return ret;
+ }
+
+ info->input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!info->input_dev) {
+ dev_err(&pdev->dev, "failed to allocate input device.\n");
+ return -ENOMEM;
+ }
+
+ info->input_dev->name = "sc27xx:vibrator";
+ info->input_dev->id.version = 0;
+ info->input_dev->dev.parent = pdev->dev.parent;
+ info->input_dev->close = sc27xx_vibra_close;
+
+ input_set_drvdata(info->input_dev, info);
+ input_set_capability(info->input_dev, EV_FF, FF_RUMBLE);
+ INIT_WORK(&info->play_work, sc27xx_vibra_play_work);
+ info->enabled = false;
+
+ ret = input_ff_create_memless(info->input_dev, NULL, sc27xx_vibra_play);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register vibrator to FF.\n");
+ return ret;
+ }
+
+ ret = input_register_device(info->input_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register input device.\n");
+ input_ff_destroy(info->input_dev);
+ return ret;
+ }
+
+ ret = sc27xx_vibra_hw_init(info);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize the vibrator.\n");
+ input_ff_destroy(info->input_dev);
+ input_unregister_device(info->input_dev);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, info);
+ return 0;
+}
+
+static const struct of_device_id sc27xx_vibra_of_match[] = {
+ { .compatible = "sprd,sc27xx-vibrator", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match);
+
+static struct platform_driver sc27xx_vibra_driver = {
+ .driver = {
+ .name = "sc27xx-vibrator",
+ .of_match_table = sc27xx_vibra_of_match,
+ },
+ .probe = sc27xx_vibra_probe,
+};
+
+module_platform_driver(sc27xx_vibra_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@xxxxxxxxxxxxxx>");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
