On Saturday 10 March 2018 03:53 AM, Enric Balletbo i Serra wrote:
From: zain wang <wzz@xxxxxxxxxxxxxx>
There are some different bits between Rockchip and Exynos in register
"AUX_PD". This patch fixes the incorrect operations about it.
You mean the register ANALOGIX_DP_PHY_PD/ANALOGIX_DP_PD, right? AUX_PD
sounds like just one of the fields of the register.
With that,
Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
Thanks,
Archit
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: zain wang <wzz@xxxxxxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 117 ++++++++++++----------
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 2 +
2 files changed, 65 insertions(+), 54 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index bb72f8b0e603..dee1ba109b5f 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -248,76 +248,85 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
{
u32 reg;
u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+ u32 mask;
if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
phy_pd_addr = ANALOGIX_DP_PD;
switch (block) {
case AUX_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg |= AUX_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- } else {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg &= ~AUX_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- }
+ if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+ mask = RK_AUX_PD;
+ else
+ mask = AUX_PD;
+
+ reg = readl(dp->reg_base + phy_pd_addr);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ writel(reg, dp->reg_base + phy_pd_addr);
break;
case CH0_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg |= CH0_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- } else {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg &= ~CH0_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- }
+ mask = CH0_PD;
+ reg = readl(dp->reg_base + phy_pd_addr);
+
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ writel(reg, dp->reg_base + phy_pd_addr);
break;
case CH1_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg |= CH1_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- } else {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg &= ~CH1_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- }
+ mask = CH1_PD;
+ reg = readl(dp->reg_base + phy_pd_addr);
+
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ writel(reg, dp->reg_base + phy_pd_addr);
break;
case CH2_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg |= CH2_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- } else {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg &= ~CH2_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- }
+ mask = CH2_PD;
+ reg = readl(dp->reg_base + phy_pd_addr);
+
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ writel(reg, dp->reg_base + phy_pd_addr);
break;
case CH3_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg |= CH3_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- } else {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg &= ~CH3_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- }
+ mask = CH3_PD;
+ reg = readl(dp->reg_base + phy_pd_addr);
+
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ writel(reg, dp->reg_base + phy_pd_addr);
break;
case ANALOG_TOTAL:
- if (enable) {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg |= DP_PHY_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- } else {
- reg = readl(dp->reg_base + phy_pd_addr);
- reg &= ~DP_PHY_PD;
- writel(reg, dp->reg_base + phy_pd_addr);
- }
+ /*
+ * There is no bit named DP_PHY_PD, so We used DP_INC_BG
+ * to power off everything instead of DP_PHY_PD in
+ * Rockchip
+ */
+ if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+ mask = DP_INC_BG;
+ else
+ mask = DP_PHY_PD;
+
+ reg = readl(dp->reg_base + phy_pd_addr);
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+
+ writel(reg, dp->reg_base + phy_pd_addr);
+ if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+ usleep_range(10, 15);
break;
case POWER_ALL:
if (enable) {
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 9602668669f4..b633a4a5082a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -345,7 +345,9 @@
#define DP_INC_BG (0x1 << 7)
#define DP_EXP_BG (0x1 << 6)
#define DP_PHY_PD (0x1 << 5)
+#define RK_AUX_PD (0x1 << 5)
#define AUX_PD (0x1 << 4)
+#define RK_PLL_PD (0x1 << 4)
#define CH3_PD (0x1 << 3)
#define CH2_PD (0x1 << 2)
#define CH1_PD (0x1 << 1)
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
