On Saturday 10 March 2018 03:52 AM, Enric Balletbo i Serra wrote:
From: Lin Huang <hl@xxxxxxxxxxxxxx>
We need to enable video before analogix_dp_is_video_stream_on(), so
we can get the right video stream status.
Cc: 征增 王 <wzz@xxxxxxxxxxxxxx>
Cc: Stéphane Marchesin <marcheu@xxxxxxxxxxxx>
Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 5a2e35dc41e3..f9661b410cb9 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -819,11 +819,10 @@ static int analogix_dp_config_video(struct analogix_dp_device *dp)
if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
break;
if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "Timeout of video streamclk ok\n");
+ dev_err(dp->dev, "Timeout of slave video streamclk ok\n");
return -ETIMEDOUT;
}
-
- usleep_range(1, 2);
+ usleep_range(1000, 1001);
Could we briefly explain in the commit message why we need to increase
the delay in the timeout loop? Is it a consequence of calling
analogix_dp_start_video() earlier, or is this the preferred time
mentioned in the specs?
Thanks,
Archit
}
/* Set to use the register calculated M/N video */
@@ -838,6 +837,9 @@ static int analogix_dp_config_video(struct analogix_dp_device *dp)
/* Configure video slave mode */
analogix_dp_enable_video_master(dp, 0);
+ /* Enable video */
+ analogix_dp_start_video(dp);
+
timeout_loop = 0;
for (;;) {
@@ -948,9 +950,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
DRM_ERROR("failed to enable the panel\n");
}
- /* Enable video */
- analogix_dp_start_video(dp);
-
dp->psr_enable = analogix_dp_detect_sink_psr(dp);
if (dp->psr_enable)
analogix_dp_enable_sink_psr(dp);
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
