This patchset implements a driver for Valve Steam Controller, based on a reverse analysis by myself. This is reroll v4, changes since v3: * Add command to check the wireless connection status on probe, without waiting for a message (thanks to Clément Vuchener for the tip). * Removed the error code on redundant connection/disconnection messages. That was harmless but polluted dmesg. * Added buttons for touching the left-pad and right-pad. * Fixed a misplaced #include from 2/4 to 1/4. I've added the new command from the first point in a new commit, so now there are 4 parts. Feel free to merge that with the previous (or all of them) if you wish. About the new buttons, before I considered those unnecesary because I thought of the pads as a kind of flat joysticks, so when they are not touched they go back to the virtual center (0,0), and the touch/untouch events are not useful. But I've been proved short-sighted in this kind of decisions before, so I've added them, sure they are useful for somebody. Also, I've been running some tests, with the driver, the Steam Client and my stemctrl utility [1], and all works just fine. Even unloading and reloading the modules (with a UDEV rule to disable the lizard mode) while the Steam Client is running works without any issue. [1]: https://github.com/rodrigorc/steamctrl Rodrigo Rivas Costa (4): HID: add driver for Valve Steam Controller HID: steam: add serial number information. HID: steam: command to check wireless connection HID: steam: add battery device. drivers/hid/Kconfig | 8 + drivers/hid/Makefile | 1 + drivers/hid/hid-ids.h | 4 + drivers/hid/hid-steam.c | 797 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 810 insertions(+) create mode 100644 drivers/hid/hid-steam.c -- 2.16.2 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
